jesus/tinyusb
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fix cmsis rtx tick configuration

Browse Source 
everything should work
TODO: remove static for variable error in control xfer subtask
This commit is contained in:
hathach
2013-09-13 23:32:07 +07:00
parent 67453b89f0
commit 0d279facbb
9 changed files with 32 additions and 33 deletions
Download Patch File Download Diff File Expand all files Collapse all files
demos/bsp/boards/ngx/board_ngx4330.c
+20 -21
View File
@@ -48,36 +48,35 @@ const static struct {
void board_init(void)
{
SystemInit();
CGU_Init();
SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/CFG_TICKS_PER_SECOND ); /* 1 ms Timer */
SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/CFG_TICKS_PER_SECOND ); /* 1 ms Timer */
//------------- USB Bus power HOST ONLY-------------//
scu_pinmux(0x1, 7, MD_PUP | MD_EZI, FUNC4); // P1_7 USB0_PWR_EN, USB0 VBus function Xplorer
//------------- USB Bus power HOST ONLY-------------//
scu_pinmux(0x1, 7, MD_PUP | MD_EZI, FUNC4); // P1_7 USB0_PWR_EN, USB0 VBus function Xplorer
scu_pinmux(0x2, 6, MD_PUP | MD_EZI, FUNC4); // P2_6 is configured as GPIO5[6] for USB1_PWR_EN
GPIO_SetDir (5, BIT_(6), 1); // GPIO5[6] is output
GPIO_SetValue (5, BIT_(6)); // GPIO5[6] output high
scu_pinmux(0x2, 6, MD_PUP | MD_EZI, FUNC4); // P2_6 is configured as GPIO5[6] for USB1_PWR_EN
GPIO_SetDir (5, BIT_(6), 1); // GPIO5[6] is output
GPIO_SetValue (5, BIT_(6)); // GPIO5[6] output high
// Leds Init
for (uint8_t i=0; i<BOARD_MAX_LEDS; i++)
{
scu_pinmux(leds[i].port, leds[i].pin, MD_PUP|MD_EZI|MD_ZI, FUNC0);
GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
}
// Leds Init
for (uint8_t i=0; i<BOARD_MAX_LEDS; i++)
{
scu_pinmux(leds[i].port, leds[i].pin, MD_PUP|MD_EZI|MD_ZI, FUNC0);
GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
}
#if CFG_UART_ENABLE
//------------- UART init -------------//
UART_CFG_Type UARTConfigStruct;
//------------- UART init -------------//
UART_CFG_Type UARTConfigStruct;
scu_pinmux(0x6 ,4, MD_PDN|MD_EZI, FUNC2); // UART0_TXD
scu_pinmux(0x6 ,5, MD_PDN|MD_EZI, FUNC2); // UART0_RXD
scu_pinmux(0x6 ,4, MD_PDN|MD_EZI, FUNC2); // UART0_TXD
scu_pinmux(0x6 ,5, MD_PDN|MD_EZI, FUNC2); // UART0_RXD
UART_ConfigStructInit(&UARTConfigStruct); // default: baud = 9600, 8 bit data, 1 stop bit, no parity
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE; // Re-configure baudrate
UART_ConfigStructInit(&UARTConfigStruct); // default: baud = 9600, 8 bit data, 1 stop bit, no parity
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE; // Re-configure baudrate
UART_Init((LPC_USARTn_Type*) LPC_USART0, &UARTConfigStruct); // Initialize UART port
UART_TxCmd((LPC_USARTn_Type*) LPC_USART0, ENABLE); // Enable UART
UART_Init((LPC_USARTn_Type*) LPC_USART0, &UARTConfigStruct); // Initialize UART port
UART_TxCmd((LPC_USARTn_Type*) LPC_USART0, ENABLE); // Enable UART
#endif
}