jesus/tinyusb
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

move scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2) to hal/hal_lpc43xx.c

Browse Source 
dual host run without problem with mcb4300
This commit is contained in:
hathach
2013-05-23 14:56:11 +07:00
parent 94fc55ba2c
commit 132c3996ea
7 changed files with 11 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files
demos/bsp/boards/embedded_artists/board_ea4357.c
-1
View File
@@ -56,7 +56,6 @@ void board_init(void)
scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7); // USB0 VBus Power
// USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required
scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence, must be high for bus reset occur
// init I2C and set up MIC2555 to have 15k pull-down on USB1 D+ & D-
I2C_Init(LPC_I2C0, 100000);
demos/bsp/boards/keil/board_mcb4300.c
+5 -6
View File
@@ -77,14 +77,13 @@ void board_init(void)
SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
//------------- USB Bus power HOST ONLY-------------//
//scu_pinmux(0x6, 3, MD_PUP | MD_EZI, FUNC1); // P6_3 USB0_PWR_EN, USB0 VBus function
// Keil VBUS0 on schematic is F1
// Keil VBUS0 is P6_3
scu_pinmux(0x6, 3, MD_PUP | MD_EZI, FUNC1); // P6_3 USB0_PWR_EN, USB0 VBus function
// TODO USB1 P2_5
scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence, must be high for bus reset occur
//scu_pinmux(0x9, 5, MD_PUP | MD_EZI, FUNC2); // P9_5 USB1_PWR_EN, USB1 VBus function
// Keil VBUS1 on schematics is P2_5
// Keil VBUS1 is P9_5
scu_pinmux(0x9, 5, MD_PUP | MD_EZI, FUNC2); // P9_5 USB1_PWR_EN, USB1 VBus function
//------------- LEDs init, J21 must be installed -------------//
for(uint32_t i=0; i<BOARD_MAX_LEDS; i++)
demos/bsp/boards/keil/board_mcb4300.h
+1 -1
View File
@@ -56,7 +56,7 @@
extern "C" {
#endif
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#define CFG_PRINTF_TARGET PRINTF_TARGET_DEBUG_CONSOLE
#ifdef __cplusplus
demos/bsp/boards/ngx/board_ngx4330.c
-1
View File
@@ -55,7 +55,6 @@ void board_init(void)
//------------- USB Bus power HOST ONLY-------------//
scu_pinmux(0x1, 7, MD_PUP | MD_EZI, FUNC4); // P1_7 USB0_PWR_EN, USB0 VBus function Xplorer
scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence, must be high for bus reset occur
scu_pinmux(0x2, 6, MD_PUP | MD_EZI, FUNC4); // P2_6 is configured as GPIO5[6] for USB1_PWR_EN
GPIO_SetDir (5, BIT_(6), 1); // GPIO5[6] is output
GPIO_SetValue (5, BIT_(6)); // GPIO5[6] output high