mass rename TUSB_CFG to CFG_TUSB

hw/bsp/ea4357/board_ea4357.c

@@ -68,7 +68,7 @@ enum {
 /*------------------------------------------------------------------*/
 /* TUSB HAL MILLISECOND
  *------------------------------------------------------------------*/
-#if TUSB_CFG_OS == TUSB_OS_NONE
+#if CFG_TUSB_OS == TUSB_OS_NONE
 
 volatile uint32_t system_ticks = 0;
 
@@ -91,7 +91,7 @@ void board_init(void)
 {
   CGU_Init();
 
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
+#if CFG_TUSB_OS == TUSB_OS_NONE // TODO may move to main.c
   SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / BOARD_TICKS_HZ); // 1 msec tick timer
 #endif
 
@@ -99,7 +99,7 @@ void board_init(void)
   // USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
   scu_pinmux(0x02, 3, MD_PUP | MD_EZI, FUNC7);		// USB0 VBus Power
 
-  #if TUSB_CFG_CONTROLLER_0_MODE & TUSB_MODE_DEVICE
+  #if CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_DEVICE
   scu_pinmux(0x09, 5, GPIO_PDN, FUNC4); // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low.
   GPIO_SetDir(5, BIT_(18), 1);
   #endif

hw/bsp/keil/board_mcb4300.c

@@ -74,7 +74,7 @@ void board_init(void)
 {
   CGU_Init();
 
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
+#if CFG_TUSB_OS == TUSB_OS_NONE // TODO may move to main.c
   SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / BOARD_TICKS_HZ); // 1 msec tick timer
 #endif
 

hw/bsp/lpcxpresso/board_lpclink2.c

@@ -56,7 +56,7 @@ void board_init(void)
 {
   CGU_Init();
 
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
+#if CFG_TUSB_OS == TUSB_OS_NONE // TODO may move to main.c
   SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / BOARD_TICKS_HZ); // 1 msec tick timer
 #endif
 

hw/bsp/lpcxpresso/board_lpcxpresso11u14.c

@@ -67,7 +67,7 @@ void board_init(void)
 {
   SystemInit();
 
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
+#if CFG_TUSB_OS == TUSB_OS_NONE // TODO may move to main.c
   SysTick_Config(SystemCoreClock / BOARD_TICKS_HZ); // 1 msec tick timer
 #endif
 

hw/bsp/lpcxpresso11u68/board_lpcxpresso11u68.c

@@ -58,7 +58,7 @@ void board_init(void)
 {
   SystemInit();
 
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
+#if CFG_TUSB_OS == TUSB_OS_NONE // TODO may move to main.c
   SysTick_Config(SystemCoreClock / BOARD_TICKS_HZ); // 1 msec tick timer
 #endif
 

hw/bsp/lpcxpresso1347/board_lpcxpresso1347.c

@@ -68,7 +68,7 @@ void board_init(void)
 {
   SystemInit();
 
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
+#if CFG_TUSB_OS == TUSB_OS_NONE // TODO may move to main.c
   SysTick_Config(SystemCoreClock / BOARD_TICKS_HZ); // 1 msec tick timer
 #endif
 

hw/bsp/lpcxpresso1769/board_lpcxpresso1769.c

@@ -67,7 +67,7 @@ void board_init(void)
 {
   SystemInit();
 
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
+#if CFG_TUSB_OS == TUSB_OS_NONE // TODO may move to main.c
   SysTick_Config(SystemCoreClock / BOARD_TICKS_HZ); // 1 msec tick timer
 #endif
 

hw/bsp/ngx/board_ngx4330.c

@@ -70,7 +70,7 @@ void board_init(void)
 {
   CGU_Init();
 
-#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
+#if CFG_TUSB_OS == TUSB_OS_NONE // TODO may move to main.c
   SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/BOARD_TICKS_HZ );	/* 1 ms Timer */
 #endif
 

hw/mcu/nxp/lpc11uxx/hal_mcu/hal_lpc11uxx.c

@@ -39,7 +39,7 @@
 #include "common/tusb_common.h"
 #include "hal.h"
 
-#if TUSB_CFG_MCU == MCU_LPC11UXX
+#if CFG_TUSB_MCU == MCU_LPC11UXX
 
 void tusb_hal_int_enable(uint8_t rhport)
 {

hw/mcu/nxp/lpc13uxx/hal_mcu/hal_lpc13uxx.c

@@ -39,7 +39,7 @@
 #include "common/tusb_common.h"
 #include "hal.h"
 
-#if TUSB_CFG_MCU == MCU_LPC13UXX
+#if CFG_TUSB_MCU == MCU_LPC13UXX
 
 void tusb_hal_int_enable(uint8_t rhport)
 {