jesus/tinyusb
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

clean up lpc makefile

Browse Source
This commit is contained in:
hathach
2019-09-09 12:39:58 +07:00
parent 8ac115a33e
commit 4f4182e171
12 changed files with 37 additions and 1396 deletions
Download Patch File Download Diff File Expand all files Collapse all files
hw/bsp/ea4088qs/board.mk
+11 -8
View File
@@ -11,6 +11,8 @@ CFLAGS += \
# lpc_types.h cause following errors
CFLAGS += -Wno-error=strict-prototypes
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc40xx/lpc_chip_40xx
# All source paths should be relative to the top level.
LD_FILE = hw/bsp/ea4088qs/lpc4088.ld
@@ -18,16 +20,17 @@ LD_FILE = hw/bsp/ea4088qs/lpc4088.ld
SRC_C += src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c
SRC_C += \
hw/mcu/nxp/lpc_driver/lpc_chip_40xx/src/chip_17xx_40xx.c \
hw/mcu/nxp/lpc_driver/lpc_chip_40xx/src/clock_17xx_40xx.c \
hw/mcu/nxp/lpc_driver/lpc_chip_40xx/src/gpio_17xx_40xx.c \
hw/mcu/nxp/lpc_driver/lpc_chip_40xx/src/iocon_17xx_40xx.c \
hw/mcu/nxp/lpc_driver/lpc_chip_40xx/src/sysctl_17xx_40xx.c \
hw/mcu/nxp/lpc_driver/lpc_chip_40xx/src/sysinit_17xx_40xx.c \
hw/mcu/nxp/lpc_driver/lpc_chip_40xx/src/uart_17xx_40xx.c
$(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \
$(MCU_DIR)/src/chip_17xx_40xx.c \
$(MCU_DIR)/src/clock_17xx_40xx.c \
$(MCU_DIR)/src/gpio_17xx_40xx.c \
$(MCU_DIR)/src/iocon_17xx_40xx.c \
$(MCU_DIR)/src/sysctl_17xx_40xx.c \
$(MCU_DIR)/src/sysinit_17xx_40xx.c \
$(MCU_DIR)/src/uart_17xx_40xx.c
INC += \
$(TOP)/hw/mcu/nxp/lpc_driver/lpc_chip_40xx/inc
$(TOP)/$(MCU_DIR)/inc
# For TinyUSB port source
VENDOR = nxp
hw/bsp/ea4088qs/cr_startup_lpc40xx.c
-418
View File
@@ -1,418 +0,0 @@
//*****************************************************************************
// LPC407x_8x Microcontroller Startup code for use with LPCXpresso IDE
//
// Version : 140114
//*****************************************************************************
//
// Copyright(C) NXP Semiconductors, 2014
// All rights reserved.
//
// Software that is described herein is for illustrative purposes only
// which provides customers with programming information regarding the
// LPC products. This software is supplied "AS IS" without any warranties of
// any kind, and NXP Semiconductors and its licensor disclaim any and
// all warranties, express or implied, including all implied warranties of
// merchantability, fitness for a particular purpose and non-infringement of
// intellectual property rights. NXP Semiconductors assumes no responsibility
// or liability for the use of the software, conveys no license or rights under any
// patent, copyright, mask work right, or any other intellectual property rights in
// or to any products. NXP Semiconductors reserves the right to make changes
// in the software without notification. NXP Semiconductors also makes no
// representation or warranty that such application will be suitable for the
// specified use without further testing or modification.
//
// Permission to use, copy, modify, and distribute this software and its
// documentation is hereby granted, under NXP Semiconductors' and its
// licensor's relevant copyrights in the software, without fee, provided that it
// is used in conjunction with NXP Semiconductors microcontrollers. This
// copyright, permission, and disclaimer notice must appear in all copies of
// this code.
//*****************************************************************************
#if defined (__cplusplus)
#ifdef __REDLIB__
#error Redlib does not support C++
#else
//*****************************************************************************
//
// The entry point for the C++ library startup
//
//*****************************************************************************
extern "C" {
extern void __libc_init_array(void);
}
#endif
#endif
#define WEAK __attribute__ ((weak))
#define ALIAS(f) __attribute__ ((weak, alias (#f)))
//*****************************************************************************
#if defined (__cplusplus)
extern "C" {
#endif
//*****************************************************************************
#if defined (__USE_CMSIS) || defined (__USE_LPCOPEN)
// Declaration of external SystemInit function
extern void SystemInit(void);
#endif
//*****************************************************************************
//
// Forward declaration of the default handlers. These are aliased.
// When the application defines a handler (with the same name), this will
// automatically take precedence over these weak definitions
//
//*****************************************************************************
void ResetISR(void);
WEAK void NMI_Handler(void);
WEAK void HardFault_Handler(void);
WEAK void MemManage_Handler(void);
WEAK void BusFault_Handler(void);
WEAK void UsageFault_Handler(void);
WEAK void SVC_Handler(void);
WEAK void DebugMon_Handler(void);
WEAK void PendSV_Handler(void);
WEAK void SysTick_Handler(void);
WEAK void IntDefaultHandler(void);
//*****************************************************************************
//
// Forward declaration of the specific IRQ handlers. These are aliased
// to the IntDefaultHandler, which is a 'forever' loop. When the application
// defines a handler (with the same name), this will automatically take
// precedence over these weak definitions
//
//*****************************************************************************
void WDT_IRQHandler(void) ALIAS(IntDefaultHandler);
void TIMER0_IRQHandler(void) ALIAS(IntDefaultHandler);
void TIMER1_IRQHandler(void) ALIAS(IntDefaultHandler);
void TIMER2_IRQHandler(void) ALIAS(IntDefaultHandler);
void TIMER3_IRQHandler(void) ALIAS(IntDefaultHandler);
void UART0_IRQHandler(void) ALIAS(IntDefaultHandler);
void UART1_IRQHandler(void) ALIAS(IntDefaultHandler);
void UART2_IRQHandler(void) ALIAS(IntDefaultHandler);
void UART3_IRQHandler(void) ALIAS(IntDefaultHandler);
void PWM1_IRQHandler(void) ALIAS(IntDefaultHandler);
void I2C0_IRQHandler(void) ALIAS(IntDefaultHandler);
void I2C1_IRQHandler(void) ALIAS(IntDefaultHandler);
void I2C2_IRQHandler(void) ALIAS(IntDefaultHandler);
void SPI_IRQHandler(void) ALIAS(IntDefaultHandler);
void SSP0_IRQHandler(void) ALIAS(IntDefaultHandler);
void SSP1_IRQHandler(void) ALIAS(IntDefaultHandler);
void PLL0_IRQHandler(void) ALIAS(IntDefaultHandler);
void RTC_IRQHandler(void) ALIAS(IntDefaultHandler);
void EINT0_IRQHandler(void) ALIAS(IntDefaultHandler);
void EINT1_IRQHandler(void) ALIAS(IntDefaultHandler);
void EINT2_IRQHandler(void) ALIAS(IntDefaultHandler);
void EINT3_IRQHandler(void) ALIAS(IntDefaultHandler);
void ADC_IRQHandler(void) ALIAS(IntDefaultHandler);
void BOD_IRQHandler(void) ALIAS(IntDefaultHandler);
void USB_IRQHandler(void) ALIAS(IntDefaultHandler);
void CAN_IRQHandler(void) ALIAS(IntDefaultHandler);
void DMA_IRQHandler(void) ALIAS(IntDefaultHandler);
void I2S_IRQHandler(void) ALIAS(IntDefaultHandler);
#if defined (__USE_LPCOPEN)
void ETH_IRQHandler(void) ALIAS(IntDefaultHandler);
#else
void ENET_IRQHandler(void) ALIAS(IntDefaultHandler);
#endif
void RIT_IRQHandler(void) ALIAS(IntDefaultHandler);
void MCPWM_IRQHandler(void) ALIAS(IntDefaultHandler);
void QEI_IRQHandler(void) ALIAS(IntDefaultHandler);
void PLL1_IRQHandler(void) ALIAS(IntDefaultHandler);
void USBActivity_IRQHandler(void) ALIAS(IntDefaultHandler);
void CANActivity_IRQHandler(void) ALIAS(IntDefaultHandler);
#if defined (__USE_LPCOPEN)
void SDIO_IRQHandler(void) ALIAS(IntDefaultHandler);
#else
void MCI_IRQHandler(void) ALIAS(IntDefaultHandler);
#endif
void UART4_IRQHandler(void) ALIAS(IntDefaultHandler);
void SSP2_IRQHandler(void) ALIAS(IntDefaultHandler);
void LCD_IRQHandler(void) ALIAS(IntDefaultHandler);
void GPIO_IRQHandler(void) ALIAS(IntDefaultHandler);
void PWM0_IRQHandler(void) ALIAS(IntDefaultHandler);
void EEPROM_IRQHandler(void) ALIAS(IntDefaultHandler);
//*****************************************************************************
//
// The entry point for the application.
// __main() is the entry point for Redlib based applications
// main() is the entry point for Newlib based applications
//
//*****************************************************************************
#if defined (__REDLIB__)
extern void __main(void);
#endif
extern int main(void);
//*****************************************************************************
//
// External declaration for the pointer to the stack top from the Linker Script
//
//*****************************************************************************
extern void _vStackTop(void);
//*****************************************************************************
#if defined (__cplusplus)
} // extern "C"
#endif
//*****************************************************************************
//
// The vector table.
// This relies on the linker script to place at correct location in memory.
//
//*****************************************************************************
extern void (* const g_pfnVectors[])(void);
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) = {
// Core Level - CM4
&_vStackTop, // The initial stack pointer
ResetISR, // The reset handler
NMI_Handler, // The NMI handler
HardFault_Handler, // The hard fault handler
MemManage_Handler, // The MPU fault handler
BusFault_Handler, // The bus fault handler
UsageFault_Handler, // The usage fault handler
0, // Reserved
0, // Reserved
0, // Reserved
0, // Reserved
SVC_Handler, // SVCall handler
DebugMon_Handler, // Debug monitor handler
0, // Reserved
PendSV_Handler, // The PendSV handler
SysTick_Handler, // The SysTick handler
// Chip Level - LPC40xx
WDT_IRQHandler, // 16, 0x40 - WDT
TIMER0_IRQHandler, // 17, 0x44 - TIMER0
TIMER1_IRQHandler, // 18, 0x48 - TIMER1
TIMER2_IRQHandler, // 19, 0x4c - TIMER2
TIMER3_IRQHandler, // 20, 0x50 - TIMER3
UART0_IRQHandler, // 21, 0x54 - UART0
UART1_IRQHandler, // 22, 0x58 - UART1
UART2_IRQHandler, // 23, 0x5c - UART2
UART3_IRQHandler, // 24, 0x60 - UART3
PWM1_IRQHandler, // 25, 0x64 - PWM1
I2C0_IRQHandler, // 26, 0x68 - I2C0
I2C1_IRQHandler, // 27, 0x6c - I2C1
I2C2_IRQHandler, // 28, 0x70 - I2C2
IntDefaultHandler, // 29, Not used
SSP0_IRQHandler, // 30, 0x78 - SSP0
SSP1_IRQHandler, // 31, 0x7c - SSP1
PLL0_IRQHandler, // 32, 0x80 - PLL0 (Main PLL)
RTC_IRQHandler, // 33, 0x84 - RTC
EINT0_IRQHandler, // 34, 0x88 - EINT0
EINT1_IRQHandler, // 35, 0x8c - EINT1
EINT2_IRQHandler, // 36, 0x90 - EINT2
EINT3_IRQHandler, // 37, 0x94 - EINT3
ADC_IRQHandler, // 38, 0x98 - ADC
BOD_IRQHandler, // 39, 0x9c - BOD
USB_IRQHandler, // 40, 0xA0 - USB
CAN_IRQHandler, // 41, 0xa4 - CAN
DMA_IRQHandler, // 42, 0xa8 - GP DMA
I2S_IRQHandler, // 43, 0xac - I2S
#if defined (__USE_LPCOPEN)
ETH_IRQHandler, // 44, 0xb0 - Ethernet
SDIO_IRQHandler, // 45, 0xb4 - SD/MMC card I/F
#else
ENET_IRQHandler, // 44, 0xb0 - Ethernet
MCI_IRQHandler, // 45, 0xb4 - SD/MMC card I/F
#endif
MCPWM_IRQHandler, // 46, 0xb8 - Motor Control PWM
QEI_IRQHandler, // 47, 0xbc - Quadrature Encoder
PLL1_IRQHandler, // 48, 0xc0 - PLL1 (USB PLL)
USBActivity_IRQHandler, // 49, 0xc4 - USB Activity interrupt to wakeup
CANActivity_IRQHandler, // 50, 0xc8 - CAN Activity interrupt to wakeup
UART4_IRQHandler, // 51, 0xcc - UART4
SSP2_IRQHandler, // 52, 0xd0 - SSP2
LCD_IRQHandler, // 53, 0xd4 - LCD
GPIO_IRQHandler, // 54, 0xd8 - GPIO
PWM0_IRQHandler, // 55, 0xdc - PWM0
EEPROM_IRQHandler, // 56, 0xe0 - EEPROM
};
//*****************************************************************************
// Functions to carry out the initialization of RW and BSS data sections. These
// are written as separate functions rather than being inlined within the
// ResetISR() function in order to cope with MCUs with multiple banks of
// memory.
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void data_init(unsigned int romstart, unsigned int start, unsigned int len) {
unsigned int *pulDest = (unsigned int*) start;
unsigned int *pulSrc = (unsigned int*) romstart;
unsigned int loop;
for (loop = 0; loop < len; loop = loop + 4)
*pulDest++ = *pulSrc++;
}
__attribute__ ((section(".after_vectors")))
void bss_init(unsigned int start, unsigned int len) {
unsigned int *pulDest = (unsigned int*) start;
unsigned int loop;
for (loop = 0; loop < len; loop = loop + 4)
*pulDest++ = 0;
}
//*****************************************************************************
// The following symbols are constructs generated by the linker, indicating
// the location of various points in the "Global Section Table". This table is
// created by the linker via the Code Red managed linker script mechanism. It
// contains the load address, execution address and length of each RW data
// section and the execution and length of each BSS (zero initialized) section.
//*****************************************************************************
extern unsigned int __data_section_table;
extern unsigned int __data_section_table_end;
extern unsigned int __bss_section_table;
extern unsigned int __bss_section_table_end;
//*****************************************************************************
// Reset entry point for your code.
// Sets up a simple runtime environment and initializes the C/C++
// library.
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void
ResetISR(void) {
//
// Copy the data sections from flash to SRAM.
//
unsigned int LoadAddr, ExeAddr, SectionLen;
unsigned int *SectionTableAddr;
// Load base address of Global Section Table
SectionTableAddr = &__data_section_table;
// Copy the data sections from flash to SRAM.
while (SectionTableAddr < &__data_section_table_end) {
LoadAddr = *SectionTableAddr++;
ExeAddr = *SectionTableAddr++;
SectionLen = *SectionTableAddr++;
data_init(LoadAddr, ExeAddr, SectionLen);
}
// At this point, SectionTableAddr = &__bss_section_table;
// Zero fill the bss segment
while (SectionTableAddr < &__bss_section_table_end) {
ExeAddr = *SectionTableAddr++;
SectionLen = *SectionTableAddr++;
bss_init(ExeAddr, SectionLen);
}
#if defined (__VFP_FP__) && !defined (__SOFTFP__)
/*
* Code to enable the Cortex-M4 FPU only included
* if appropriate build options have been selected.
* Code taken from Section 7.1, Cortex-M4 TRM (DDI0439C)
*/
// Read CPACR (located at address 0xE000ED88)
// Set bits 20-23 to enable CP10 and CP11 coprocessors
// Write back the modified value to the CPACR
asm volatile ("LDR.W R0, =0xE000ED88\n\t"
"LDR R1, [R0]\n\t"
"ORR R1, R1, #(0xF << 20)\n\t"
"STR R1, [R0]");
#endif // (__VFP_FP__) && !(__SOFTFP__)
// Check to see if we are running the code from a non-zero
// address (eg RAM, external flash), in which case we need
// to modify the VTOR register to tell the CPU that the
// vector table is located at a non-0x0 address.
// Note that we do not use the CMSIS register access mechanism,
// as there is no guarantee that the project has been configured
// to use CMSIS.
unsigned int * pSCB_VTOR = (unsigned int *) 0xE000ED08;
if ((unsigned int *)g_pfnVectors!=(unsigned int *) 0x00000000) {
// CMSIS : SCB->VTOR = <address of vector table>
*pSCB_VTOR = (unsigned int)g_pfnVectors;
}
#if defined (__USE_CMSIS) || defined (__USE_LPCOPEN)
SystemInit();
#endif
#if defined (__cplusplus)
//
// Call C++ library initialisation
//
__libc_init_array();
#endif
#if defined (__REDLIB__)
// Call the Redlib library, which in turn calls main()
__main() ;
#else
main();
#endif
//
// main() shouldn't return, but if it does, we'll just enter an infinite loop
//
while (1) {
;
}
}
//*****************************************************************************
// Default exception handlers. Override the ones here by defining your own
// handler routines in your application code.
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void NMI_Handler(void)
{ while(1) {}
}
__attribute__ ((section(".after_vectors")))
void HardFault_Handler(void)
{ while(1) {}
}
__attribute__ ((section(".after_vectors")))
void MemManage_Handler(void)
{ while(1) {}
}
__attribute__ ((section(".after_vectors")))
void BusFault_Handler(void)
{ while(1) {}
}
__attribute__ ((section(".after_vectors")))
void UsageFault_Handler(void)
{ while(1) {}
}
__attribute__ ((section(".after_vectors")))
void SVC_Handler(void)
{ while(1) {}
}
__attribute__ ((section(".after_vectors")))
void DebugMon_Handler(void)
{ while(1) {}
}
__attribute__ ((section(".after_vectors")))
void PendSV_Handler(void)
{ while(1) {}
}
__attribute__ ((section(".after_vectors")))
void SysTick_Handler(void)
{ while(1) {}
}
//*****************************************************************************
//
// Processor ends up here if an unexpected interrupt occurs or a specific
// handler is not present in the application code.
//
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void IntDefaultHandler(void)
{ while(1) {}
}