jesus/tinyusb
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

move files around

Browse Source
This commit is contained in:
hathach
2018-03-02 18:13:35 +07:00
parent 633f46432f
commit 5b110f9f58
19 changed files with 7 additions and 1230 deletions
Download Patch File Download Diff File Expand all files Collapse all files
hw/bsp/lpcxpresso1347/board_lpcxpresso1347.c
+132
View File
@@ -0,0 +1,132 @@
/**************************************************************************/
/*!
@file board_lpcexpresso1347.c
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
#include "../board.h"
#if BOARD == BOARD_LPCXPRESSO1347
#define LED_PORT (0)
#define LED_PIN (7)
#define LED_ON (1)
#define LED_OFF (0)
const static struct {
uint8_t port;
uint8_t pin;
} buttons[] =
{
{1, 22 }, // Joystick up
{1, 20 }, // Joystick down
{1, 23 }, // Joystick left
{1, 21 }, // Joystick right
{1, 19 }, // Joystick press
{0, 1 }, // SW3
// {1, 4 }, // SW4 (require to remove J28)
};
enum {
BOARD_BUTTON_COUNT = sizeof(buttons) / sizeof(buttons[0])
};
void board_init(void)
{
SystemInit();
#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
SysTick_Config(SystemCoreClock / TUSB_CFG_TICKS_HZ); // 1 msec tick timer
#endif
GPIOInit();
//------------- LED -------------//
GPIOSetDir(LED_PORT, LED_PIN, 1);
//------------- BUTTON -------------//
for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) GPIOSetDir(buttons[i].port, BIT_(buttons[i].pin), 0);
//------------- UART -------------//
UARTInit(CFG_UART_BAUDRATE);
}
//--------------------------------------------------------------------+
// LEDS
//--------------------------------------------------------------------+
void board_leds(uint32_t on_mask, uint32_t off_mask)
{
if (on_mask & BIT_(0))
{
GPIOSetBitValue(LED_PORT, LED_PIN, LED_ON);
}else if (off_mask & BIT_(0))
{
GPIOSetBitValue(LED_PORT, LED_PIN, LED_OFF);
}
}
//--------------------------------------------------------------------+
// BUTTONS
//--------------------------------------------------------------------+
static bool button_read(uint8_t id)
{
return !GPIOGetPinValue(buttons[id].port, buttons[id].pin); // button is active low
}
uint32_t board_buttons(void)
{
uint32_t result = 0;
for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) result |= (button_read(i) ? BIT_(i) : 0);
return result;
}
//--------------------------------------------------------------------+
// UART
//--------------------------------------------------------------------+
void board_uart_putchar(uint8_t c)
{
UARTSend(&c, 1);
}
uint8_t board_uart_getchar(void)
{
return 0;
}
#endif
hw/bsp/lpcxpresso1347/board_lpcxpresso1347.h
+56
View File
@@ -0,0 +1,56 @@
/**************************************************************************/
/*!
@file board_lpcxpresso1347.h
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
#ifndef _TUSB_BOARD_LPCXPRESSO1347_H_
#define _TUSB_BOARD_LPCXPRESSO1347_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "LPC13Uxx.h"
#include "gpio.h"
#include "uart.h"
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#ifdef __cplusplus
}
#endif
#endif /* _TUSB_BOARD_LPCXPRESSO1347_H_ */
hw/bsp/lpcxpresso1347/startup/xpresso/cr_startup_lpc13u.c
+354
View File
@@ -0,0 +1,354 @@
//*****************************************************************************
// +--+
// | ++----+
// +-++ |
// | |
// +-+--+ |
// | +--+--+
// +----+ Copyright (c) 2012 Code Red Technologies Ltd.
//
// NXP LPC13U Microcontroller Startup code for use with Red Suite
//
// Version : 120202
//
// Software License Agreement
//
// The software is owned by Code Red Technologies and/or its suppliers, and is
// protected under applicable copyright laws. All rights are reserved. Any
// use in violation of the foregoing restrictions may subject the user to criminal
// sanctions under applicable laws, as well as to civil liability for the breach
// of the terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// USE OF THIS SOFTWARE FOR COMMERCIAL DEVELOPMENT AND/OR EDUCATION IS SUBJECT
// TO A CURRENT END USER LICENSE AGREEMENT (COMMERCIAL OR EDUCATIONAL) WITH
// CODE RED TECHNOLOGIES LTD.
//
//*****************************************************************************
#if defined (__cplusplus)
#ifdef __REDLIB__
#error Redlib does not support C++
#else
//*****************************************************************************
//
// The entry point for the C++ library startup
//
//*****************************************************************************
extern "C" {
extern void __libc_init_array(void);
}
#endif
#endif
#define WEAK __attribute__ ((weak))
#define ALIAS(f) __attribute__ ((weak, alias (#f)))
// Code Red - if CMSIS is being used, then SystemInit() routine
// will be called by startup code rather than in application's main()
#if defined (__USE_CMSIS)
#include "LPC13Uxx.h"
#endif
//*****************************************************************************
#if defined (__cplusplus)
extern "C" {
#endif
//*****************************************************************************
//
// Forward declaration of the default handlers. These are aliased.
// When the application defines a handler (with the same name), this will
// automatically take precedence over these weak definitions
//
//*****************************************************************************
void ResetISR(void);
WEAK void NMI_Handler(void);
WEAK void HardFault_Handler(void);
WEAK void MemManage_Handler(void);
WEAK void BusFault_Handler(void);
WEAK void UsageFault_Handler(void);
WEAK void SVC_Handler(void);
WEAK void DebugMon_Handler(void);
WEAK void PendSV_Handler(void);
WEAK void SysTick_Handler(void);
WEAK void IntDefaultHandler(void);
//*****************************************************************************
//
// Forward declaration of the specific IRQ handlers. These are aliased
// to the IntDefaultHandler, which is a 'forever' loop. When the application
// defines a handler (with the same name), this will automatically take
// precedence over these weak definitions
//
//*****************************************************************************
void PIN_INT0_IRQHandler(void) ALIAS(IntDefaultHandler);
void PIN_INT1_IRQHandler(void) ALIAS(IntDefaultHandler);
void PIN_INT2_IRQHandler(void) ALIAS(IntDefaultHandler);
void PIN_INT3_IRQHandler(void) ALIAS(IntDefaultHandler);
void PIN_INT4_IRQHandler(void) ALIAS(IntDefaultHandler);
void PIN_INT5_IRQHandler(void) ALIAS(IntDefaultHandler);
void PIN_INT6_IRQHandler(void) ALIAS(IntDefaultHandler);
void PIN_INT7_IRQHandler(void) ALIAS(IntDefaultHandler);
void GINT0_IRQHandler(void) ALIAS(IntDefaultHandler);
void GINT1_IRQHandler(void) ALIAS(IntDefaultHandler);
void OSTIMER_IRQHandler(void) ALIAS(IntDefaultHandler);
void SSP1_IRQHandler(void) ALIAS(IntDefaultHandler);
void I2C_IRQHandler(void) ALIAS(IntDefaultHandler);
void CT16B0_IRQHandler(void) ALIAS(IntDefaultHandler);
void CT16B1_IRQHandler(void) ALIAS(IntDefaultHandler);
void CT32B0_IRQHandler(void) ALIAS(IntDefaultHandler);
void CT32B1_IRQHandler(void) ALIAS(IntDefaultHandler);
void SSP0_IRQHandler(void) ALIAS(IntDefaultHandler);
void USART_IRQHandler(void) ALIAS(IntDefaultHandler);
void USB_IRQHandler(void) ALIAS(IntDefaultHandler);
void USB_FIQHandler(void) ALIAS(IntDefaultHandler);
void ADC_IRQHandler(void) ALIAS(IntDefaultHandler);
void WDT_IRQHandler(void) ALIAS(IntDefaultHandler);
void BOD_IRQHandler(void) ALIAS(IntDefaultHandler);
void FMC_IRQHandler(void) ALIAS(IntDefaultHandler);
void OSCFAIL_IRQHandler(void) ALIAS(IntDefaultHandler);
void PVTCIRCUIT_IRQHandler(void) ALIAS(IntDefaultHandler);
void USBWakeup_IRQHandler(void) ALIAS(IntDefaultHandler);
//*****************************************************************************
//
// The entry point for the application.
// __main() is the entry point for Redlib based applications
// main() is the entry point for Newlib based applications
//
//*****************************************************************************
#if defined (__REDLIB__)
extern void __main(void);
#endif
extern int main(void);
//*****************************************************************************
//
// External declaration for the pointer to the stack top from the Linker Script
//
//*****************************************************************************
extern void _vStackTop(void);
//*****************************************************************************
#if defined (__cplusplus)
} // extern "C"
#endif
//*****************************************************************************
//
// The vector table. Note that the proper constructs must be placed on this to
// ensure that it ends up at physical address 0x0000.0000.
//
//*****************************************************************************
extern void (* const g_pfnVectors[])(void);
__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) = {
// Core Level - CM3
&_vStackTop, // The initial stack pointer
ResetISR, // The reset handler
NMI_Handler, // The NMI handler
HardFault_Handler, // The hard fault handler
MemManage_Handler, // The MPU fault handler
BusFault_Handler, // The bus fault handler
UsageFault_Handler, // The usage fault handler
0, // Reserved
0, // Reserved
0, // Reserved
0, // Reserved
SVC_Handler, // SVCall handler
DebugMon_Handler, // Debug monitor handler
0, // Reserved
PendSV_Handler, // The PendSV handler
SysTick_Handler, // The SysTick handler
// LPC13U External Interrupts
PIN_INT0_IRQHandler, // All GPIO pin can be routed to PIN_INTx
PIN_INT1_IRQHandler,
PIN_INT2_IRQHandler,
PIN_INT3_IRQHandler,
PIN_INT4_IRQHandler,
PIN_INT5_IRQHandler,
PIN_INT6_IRQHandler,
PIN_INT7_IRQHandler,
GINT0_IRQHandler,
GINT1_IRQHandler, // PIO0 (0:7)
0,
0,
OSTIMER_IRQHandler,
0,
SSP1_IRQHandler, // SSP1
I2C_IRQHandler, // I2C
CT16B0_IRQHandler, // 16-bit Timer0
CT16B1_IRQHandler, // 16-bit Timer1
CT32B0_IRQHandler, // 32-bit Timer0
CT32B1_IRQHandler, // 32-bit Timer1
SSP0_IRQHandler, // SSP0
USART_IRQHandler, // USART
USB_IRQHandler, // USB IRQ
USB_FIQHandler, // USB FIQ
ADC_IRQHandler, // A/D Converter
WDT_IRQHandler, // Watchdog timer
BOD_IRQHandler, // Brown Out Detect
FMC_IRQHandler, // IP2111 Flash Memory Controller
OSCFAIL_IRQHandler, // OSC FAIL
PVTCIRCUIT_IRQHandler, // PVT CIRCUIT
USBWakeup_IRQHandler, // USB wake up
0,
};
//*****************************************************************************
// Functions to carry out the initialization of RW and BSS data sections. These
// are written as separate functions rather than being inlined within the
// ResetISR() function in order to cope with MCUs with multiple banks of
// memory.
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void data_init(unsigned int romstart, unsigned int start, unsigned int len) {
unsigned int *pulDest = (unsigned int*) start;
unsigned int *pulSrc = (unsigned int*) romstart;
unsigned int loop;
for (loop = 0; loop < len; loop = loop + 4)
*pulDest++ = *pulSrc++;
}
__attribute__ ((section(".after_vectors")))
void bss_init(unsigned int start, unsigned int len) {
unsigned int *pulDest = (unsigned int*) start;
unsigned int loop;
for (loop = 0; loop < len; loop = loop + 4)
*pulDest++ = 0;
}
//*****************************************************************************
// The following symbols are constructs generated by the linker, indicating
// the location of various points in the "Global Section Table". This table is
// created by the linker via the Code Red managed linker script mechanism. It
// contains the load address, execution address and length of each RW data
// section and the execution and length of each BSS (zero initialized) section.
//*****************************************************************************
extern unsigned int __data_section_table;
extern unsigned int __data_section_table_end;
extern unsigned int __bss_section_table;
extern unsigned int __bss_section_table_end;
//*****************************************************************************
// Reset entry point for your code.
// Sets up a simple runtime environment and initializes the C/C++
// library.
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void
ResetISR(void) {
//
// Copy the data sections from flash to SRAM.
//
unsigned int LoadAddr, ExeAddr, SectionLen;
unsigned int *SectionTableAddr;
// Load base address of Global Section Table
SectionTableAddr = &__data_section_table;
// Copy the data sections from flash to SRAM.
while (SectionTableAddr < &__data_section_table_end) {
LoadAddr = *SectionTableAddr++;
ExeAddr = *SectionTableAddr++;
SectionLen = *SectionTableAddr++;
data_init(LoadAddr, ExeAddr, SectionLen);
}
// At this point, SectionTableAddr = &__bss_section_table;
// Zero fill the bss segment
while (SectionTableAddr < &__bss_section_table_end) {
ExeAddr = *SectionTableAddr++;
SectionLen = *SectionTableAddr++;
bss_init(ExeAddr, SectionLen);
}
#ifdef __USE_CMSIS
SystemInit();
#endif
#if defined (__cplusplus)
//
// Call C++ library initialisation
//
__libc_init_array();
#endif
#if defined (__REDLIB__)
// Call the Redlib library, which in turn calls main()
__main() ;
#else
main();
#endif
//
// main() shouldn't return, but if it does, we'll just enter an infinite loop
//
while (1) {
;
}
}
//*****************************************************************************
// Default exception handlers. Override the ones here by defining your own
// handler routines in your application code.
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void NMI_Handler(void) {
while (1) {
}
}
__attribute__ ((section(".after_vectors")))
void HardFault_Handler(void) {
while (1) {
}
}
__attribute__ ((section(".after_vectors")))
void MemManage_Handler(void) {
while (1) {
}
}
__attribute__ ((section(".after_vectors")))
void BusFault_Handler(void) {
while (1) {
}
}
__attribute__ ((section(".after_vectors")))
void UsageFault_Handler(void) {
while (1) {
}
}
__attribute__ ((section(".after_vectors")))
void SVC_Handler(void) {
while (1) {
}
}
__attribute__ ((section(".after_vectors")))
void DebugMon_Handler(void) {
while (1) {
}
}
__attribute__ ((section(".after_vectors")))
void PendSV_Handler(void) {
while (1) {
}
}
__attribute__ ((section(".after_vectors")))
void SysTick_Handler(void) {
while (1) {
}
}
//*****************************************************************************
//
// Processor ends up here if an unexpected interrupt occurs or a handler
// is not present in the application code.
//
//*****************************************************************************
__attribute__ ((section(".after_vectors")))
void IntDefaultHandler(void) {
//
// Go into an infinite loop.
//
while (1) {
}
}