Merge remote-tracking branch 'origin' into msp430f5529
This commit is contained in:
William D. Jones
+1
-1
@@ -78,7 +78,7 @@ int board_uart_write(void const * buf, int len);
|
||||
{
|
||||
return os_time_ticks_to_ms32( os_time_get() );
|
||||
}
|
||||
#elif
|
||||
#else
|
||||
#error "Need to implement board_millis() for this OS"
|
||||
#endif
|
||||
|
||||
|
||||
@@ -9,7 +9,13 @@ CFLAGS += \
|
||||
-DCONFIG_GPIO_AS_PINRESET
|
||||
|
||||
# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49
|
||||
CFLAGS += -Wno-error=undef
|
||||
CFLAGS += -Wno-error=undef -Wno-error=unused-parameter
|
||||
|
||||
# due to tusb_hal_nrf_power_event
|
||||
GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion)))
|
||||
ifeq ($(shell expr $(GCCVERSION) \>= 8), 1)
|
||||
CFLAGS += -Wno-error=cast-function-type
|
||||
endif
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/circuitplayground_bluefruit/nrf52840_s140_v6.ld
|
||||
|
||||
@@ -8,8 +8,8 @@ CFLAGS += \
|
||||
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \
|
||||
-D__USE_LPCOPEN
|
||||
|
||||
# lpc_types.h cause following errors
|
||||
CFLAGS += -Wno-error=strict-prototypes
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter
|
||||
|
||||
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc40xx/lpc_chip_40xx
|
||||
|
||||
|
||||
@@ -7,8 +7,8 @@ CFLAGS += \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_LPC43XX \
|
||||
-D__USE_LPCOPEN
|
||||
|
||||
# lpc_types.h cause following errors
|
||||
CFLAGS += -Wno-error=strict-prototypes
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes
|
||||
|
||||
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc43xx/lpc_chip_43xx
|
||||
|
||||
|
||||
@@ -9,7 +9,13 @@ CFLAGS += \
|
||||
-DCONFIG_GPIO_AS_PINRESET
|
||||
|
||||
# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49
|
||||
CFLAGS += -Wno-error=undef
|
||||
CFLAGS += -Wno-error=undef -Wno-error=unused-parameter
|
||||
|
||||
# due to tusb_hal_nrf_power_event
|
||||
GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion)))
|
||||
ifeq ($(shell expr $(GCCVERSION) \>= 8), 1)
|
||||
CFLAGS += -Wno-error=cast-function-type
|
||||
endif
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/feather_nrf52840_express/nrf52840_s140_v6.ld
|
||||
|
||||
@@ -0,0 +1,189 @@
|
||||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32F405RGTx Device with
|
||||
** 1024KByte FLASH, 128KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
** (c)Copyright Ac6.
|
||||
** You may use this file as-is or modify it according to the needs of your
|
||||
** project. Distribution of this file (unmodified or modified) is not
|
||||
** permitted. Ac6 permit registered System Workbench for MCU users the
|
||||
** rights to distribute the assembled, compiled & linked contents of this
|
||||
** file as part of an application binary file, provided that it is built
|
||||
** using the System Workbench for MCU toolchain.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20020000; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
_siccmram = LOADADDR(.ccmram);
|
||||
|
||||
/* CCM-RAM section
|
||||
*
|
||||
* IMPORTANT NOTE!
|
||||
* If initialized variables will be placed in this section,
|
||||
* the startup code needs to be modified to copy the init-values.
|
||||
*/
|
||||
.ccmram :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sccmram = .; /* create a global symbol at ccmram start */
|
||||
*(.ccmram)
|
||||
*(.ccmram*)
|
||||
|
||||
. = ALIGN(4);
|
||||
_eccmram = .; /* create a global symbol at ccmram end */
|
||||
} >CCMRAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,50 @@
|
||||
CFLAGS += \
|
||||
-DHSE_VALUE=12000000 \
|
||||
-DSTM32F405xx \
|
||||
-mthumb \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m4 \
|
||||
-mfloat-abi=hard \
|
||||
-mfpu=fpv4-sp-d16 \
|
||||
-nostdlib -nostartfiles \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32F4
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F4xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/pyboardv11/STM32F405RGTx_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32f4xx.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f4xx_hal.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_cortex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_rcc.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_gpio.c
|
||||
|
||||
SRC_S += \
|
||||
$(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s
|
||||
|
||||
INC += \
|
||||
$(TOP)/hw/mcu/st/st_driver/CMSIS/Include \
|
||||
$(TOP)/$(ST_CMSIS)/Include \
|
||||
$(TOP)/$(ST_HAL_DRIVER)/Inc \
|
||||
$(TOP)/hw/bsp/$(BOARD)
|
||||
|
||||
# For TinyUSB port source
|
||||
VENDOR = st
|
||||
CHIP_FAMILY = synopsys
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORT = ARM_CM4F
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32f405rg
|
||||
JLINK_IF = swd
|
||||
|
||||
# Path to STM32 Cube Programmer CLI, should be added into system path
|
||||
STM32Prog = STM32_Programmer_CLI
|
||||
|
||||
# flash target using on-board stlink
|
||||
flash: $(BUILD)/$(BOARD)-firmware.elf
|
||||
$(STM32Prog) --connect port=swd --write $< --go
|
||||
@@ -0,0 +1,198 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "../board.h"
|
||||
|
||||
#include "stm32f4xx.h"
|
||||
#include "stm32f4xx_hal_conf.h"
|
||||
|
||||
// Blue LED is chosen because the other LEDs are connected to ST-LINK lines.
|
||||
#define LED_PORT GPIOC
|
||||
#define LED_PIN GPIO_PIN_4
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
// Pin D5
|
||||
#define BUTTON_PORT GPIOC
|
||||
#define BUTTON_PIN GPIO_PIN_7
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* The system Clock is configured as follow :
|
||||
* System Clock source = PLL (HSE)
|
||||
* SYSCLK(Hz) = 168000000
|
||||
* HCLK(Hz) = 168000000
|
||||
* AHB Prescaler = 1
|
||||
* APB1 Prescaler = 4
|
||||
* APB2 Prescaler = 2
|
||||
* HSE Frequency(Hz) = 12000000
|
||||
* PLL_M = 12
|
||||
* PLL_N = 336
|
||||
* PLL_P = 2
|
||||
* PLL_Q = 7
|
||||
* VDD(V) = 3.3
|
||||
* Main regulator output voltage = Scale1 mode
|
||||
* Flash Latency(WS) = 5
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void SystemClock_Config(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/* Enable Power Control clock */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 12;
|
||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||
clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
|
||||
}
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
||||
//NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
||||
#endif
|
||||
|
||||
SystemClock_Config();
|
||||
|
||||
// Notify runtime of frequency change.
|
||||
SystemCoreClockUpdate();
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
// LED
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = LED_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||||
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
|
||||
|
||||
board_led_write(false);
|
||||
|
||||
// Button
|
||||
//__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = BUTTON_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||||
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
|
||||
|
||||
// Enable USB OTG clock
|
||||
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
||||
|
||||
// USB Pin Init
|
||||
// PA9- VUSB, PA10- ID, PA11- DM, PA12- DP
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
|
||||
/* Configure DM DP Pins */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* Configure VBUS Pin */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* This for ID line debug */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
||||
void HardFault_Handler (void)
|
||||
{
|
||||
asm("bkpt");
|
||||
}
|
||||
|
||||
// Required by __libc_init_array in startup code if we are compiling using
|
||||
// -nostdlib/-nostartfiles.
|
||||
void _init(void)
|
||||
{
|
||||
|
||||
}
|
||||
@@ -0,0 +1,489 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf.h
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_H
|
||||
#define __STM32F4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
/* #define HAL_SPI_MODULE_ENABLED */
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
/* #define HAL_UART_MODULE_ENABLED */
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_EXTI_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
/* Copied over manually- STM32Cube didn't generate these for some reason. */
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
|
||||
#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
|
||||
|
||||
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
|
||||
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpi2c.h"
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -10,8 +10,8 @@ CFLAGS += \
|
||||
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \
|
||||
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
|
||||
|
||||
# startup.c and lpc_types.h cause following errors
|
||||
CFLAGS += -Wno-error=nested-externs -Wno-error=strict-prototypes
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=nested-externs -Wno-error=strict-prototypes -Wno-error=unused-parameter
|
||||
|
||||
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc11uxx/lpc_chip_11uxx
|
||||
|
||||
|
||||
@@ -7,8 +7,8 @@ CFLAGS += \
|
||||
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \
|
||||
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
|
||||
|
||||
# system_LPC51U68.c cause following errors
|
||||
CFLAGS += -Wno-error=nested-externs
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=nested-externs -Wno-error=unused-parameter
|
||||
|
||||
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc51u6x/devices/LPC51U68
|
||||
|
||||
|
||||
@@ -9,6 +9,9 @@ CFLAGS += \
|
||||
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \
|
||||
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
|
||||
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=unused-parameter
|
||||
|
||||
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc54xxx/devices/LPC54114
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
|
||||
@@ -7,10 +7,10 @@ CFLAGS += \
|
||||
-DCPU_LPC55S69JBD100_cm33_core0 \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_LPC55XX \
|
||||
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \
|
||||
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
|
||||
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
|
||||
|
||||
# system_LPC55S69_cm33_core0.c cause following errors
|
||||
CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=unused-parameter -Wno-error=float-equal -Wno-error=nested-externs
|
||||
|
||||
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc55xx/devices/LPC55S69
|
||||
|
||||
|
||||
@@ -7,8 +7,8 @@ CFLAGS += \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_LPC18XX \
|
||||
-D__USE_LPCOPEN
|
||||
|
||||
# lpc_types.h cause following errors
|
||||
CFLAGS += -Wno-error=strict-prototypes
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes
|
||||
|
||||
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc18xx/lpc_chip_18xx
|
||||
|
||||
|
||||
@@ -7,8 +7,8 @@ CFLAGS += \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_LPC43XX \
|
||||
-D__USE_LPCOPEN
|
||||
|
||||
# lpc_types.h cause following errors
|
||||
CFLAGS += -Wno-error=strict-prototypes
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter
|
||||
|
||||
MCU_DIR = hw/mcu/nxp/lpc_driver/lpc43xx/lpc_chip_43xx
|
||||
|
||||
|
||||
@@ -9,7 +9,13 @@ CFLAGS += \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_NRF5X
|
||||
|
||||
# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49
|
||||
CFLAGS += -Wno-error=undef
|
||||
CFLAGS += -Wno-error=undef -Wno-error=unused-parameter
|
||||
|
||||
# due to tusb_hal_nrf_power_event
|
||||
GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion)))
|
||||
ifeq ($(shell expr $(GCCVERSION) \>= 8), 1)
|
||||
CFLAGS += -Wno-error=cast-function-type
|
||||
endif
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld
|
||||
|
||||
@@ -96,7 +96,8 @@ void board_init(void)
|
||||
nrfx_power_init(&pwr_cfg);
|
||||
|
||||
// Register tusb function as USB power handler
|
||||
const nrfx_power_usbevt_config_t config = { .handler = (nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event };
|
||||
// cause cast-function-type warning
|
||||
const nrfx_power_usbevt_config_t config = { .handler = ((nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event) };
|
||||
nrfx_power_usbevt_init(&config);
|
||||
|
||||
nrfx_power_usbevt_enable();
|
||||
|
||||
@@ -9,7 +9,13 @@ CFLAGS += \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_NRF5X
|
||||
|
||||
# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49
|
||||
CFLAGS += -Wno-error=undef
|
||||
CFLAGS += -Wno-error=undef -Wno-error=unused-parameter
|
||||
|
||||
# due to tusb_hal_nrf_power_event
|
||||
GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion)))
|
||||
ifeq ($(shell expr $(GCCVERSION) \>= 8), 1)
|
||||
CFLAGS += -Wno-error=cast-function-type
|
||||
endif
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/$(BOARD)/$(BOARD).ld
|
||||
|
||||
@@ -39,7 +39,7 @@ CHIP_FAMILY = synopsys
|
||||
FREERTOS_PORT = ARM_CM4F
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32f407vg
|
||||
JLINK_DEVICE = stm32f405rg
|
||||
JLINK_IF = swd
|
||||
|
||||
# Path to STM32 Cube Programmer CLI, should be added into system path
|
||||
|
||||
@@ -9,11 +9,14 @@ CFLAGS += \
|
||||
-DCFG_EXAMPLE_MSC_READONLY \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32F0
|
||||
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=unused-parameter
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F0xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F0xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/stm32f070rbnucleo/stm32F070rbtx_flash.ld
|
||||
LD_FILE = hw/bsp/$(BOARD)/stm32F070rbtx_flash.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32f0xx.c \
|
||||
|
||||
@@ -29,13 +29,13 @@
|
||||
#include "stm32f0xx.h"
|
||||
#include "stm32f0xx_hal_conf.h"
|
||||
|
||||
#define LED_PORT GPIOC
|
||||
#define LED_PIN GPIO_PIN_13
|
||||
#define LED_PORT GPIOA
|
||||
#define LED_PIN GPIO_PIN_5
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
#define BUTTON_PORT GPIOA
|
||||
#define BUTTON_PIN GPIO_PIN_5
|
||||
#define BUTTON_STATE_ACTIVE 1
|
||||
#define BUTTON_PORT GPIOC
|
||||
#define BUTTON_PIN GPIO_PIN_13
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
@@ -75,7 +75,7 @@ void board_init(void)
|
||||
SystemCoreClockUpdate();
|
||||
|
||||
// LED
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
GPIO_InitStruct.Pin = LED_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
@@ -84,7 +84,7 @@ void board_init(void)
|
||||
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
|
||||
|
||||
// Button
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = BUTTON_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
|
||||
@@ -9,6 +9,9 @@ CFLAGS += \
|
||||
-DCFG_EXAMPLE_MSC_READONLY \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32F0
|
||||
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=unused-parameter
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F0xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F0xx
|
||||
|
||||
|
||||
@@ -0,0 +1,53 @@
|
||||
CFLAGS += \
|
||||
-DHSE_VALUE=8000000 \
|
||||
-DSTM32F103xB \
|
||||
-mthumb \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m3 \
|
||||
-mfloat-abi=soft \
|
||||
-nostdlib -nostartfiles \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32F1
|
||||
|
||||
# mcu driver cause following warnings
|
||||
#CFLAGS += -Wno-error=unused-parameter
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F1xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F1xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = $(ST_CMSIS)/Source/Templates/gcc/linker/STM32F103XB_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32f1xx.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f1xx_hal.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f1xx_hal_cortex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f1xx_hal_rcc.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f1xx_hal_rcc_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f1xx_hal_gpio.c
|
||||
|
||||
SRC_S += \
|
||||
$(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s
|
||||
|
||||
INC += \
|
||||
$(TOP)/hw/mcu/st/st_driver/CMSIS/Include \
|
||||
$(TOP)/$(ST_CMSIS)/Include \
|
||||
$(TOP)/$(ST_HAL_DRIVER)/Inc \
|
||||
$(TOP)/hw/bsp/$(BOARD)
|
||||
|
||||
# For TinyUSB port source
|
||||
VENDOR = st
|
||||
CHIP_FAMILY = stm32_fsdev
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORT = ARM_CM3
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32f303vc
|
||||
JLINK_IF = swd
|
||||
|
||||
# Path to STM32 Cube Programmer CLI, should be added into system path
|
||||
STM32Prog = STM32_Programmer_CLI
|
||||
|
||||
# flash target using on-board stlink
|
||||
flash: $(BUILD)/$(BOARD)-firmware.elf
|
||||
$(STM32Prog) --connect port=swd --write $< --go
|
||||
@@ -0,0 +1,182 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "../board.h"
|
||||
|
||||
#include "stm32f1xx.h"
|
||||
#include "stm32f1xx_hal_conf.h"
|
||||
|
||||
#define LED_PORT GPIOC
|
||||
#define LED_PIN GPIO_PIN_13
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
#define BUTTON_PORT GPIOA
|
||||
#define BUTTON_PIN GPIO_PIN_0
|
||||
#define BUTTON_STATE_ACTIVE 1
|
||||
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* The system Clock is configured as follow :
|
||||
* System Clock source = PLL (HSE)
|
||||
* SYSCLK(Hz) = 72000000
|
||||
* HCLK(Hz) = 72000000
|
||||
* AHB Prescaler = 1
|
||||
* APB1 Prescaler = 2
|
||||
* APB2 Prescaler = 1
|
||||
* HSE Frequency(Hz) = 8000000
|
||||
* HSE PREDIV1 = 1
|
||||
* PLLMUL = 9
|
||||
* Flash Latency(WS) = 2
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef clkinitstruct = {0};
|
||||
RCC_OscInitTypeDef oscinitstruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0};
|
||||
|
||||
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||
oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
oscinitstruct.HSEState = RCC_HSE_ON;
|
||||
oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
|
||||
oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
||||
oscinitstruct.PLL.PLLState = RCC_PLL_ON;
|
||||
oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
HAL_RCC_OscConfig(&oscinitstruct);
|
||||
|
||||
/* USB clock selection */
|
||||
rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB;
|
||||
rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
|
||||
HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit);
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
|
||||
clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2);
|
||||
}
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#endif
|
||||
|
||||
SystemClock_Config();
|
||||
|
||||
// Notify runtime of frequency change.
|
||||
SystemCoreClockUpdate();
|
||||
|
||||
// LED
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
GPIO_InitStruct.Pin = LED_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
|
||||
|
||||
// Button
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = BUTTON_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
|
||||
|
||||
// USB Pins
|
||||
// Configure USB DM and DP pins.
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
// USB Clock enable
|
||||
__HAL_RCC_USB_CLK_ENABLE();
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
||||
void HardFault_Handler (void)
|
||||
{
|
||||
asm("bkpt");
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(char *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
// Required by __libc_init_array in startup code if we are compiling using
|
||||
// -nostdlib/-nostartfiles.
|
||||
void _init(void)
|
||||
{
|
||||
|
||||
}
|
||||
@@ -0,0 +1,379 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file USB_Device/HID_Standalone/Inc/stm32f1xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration template file.
|
||||
* This file should be copied to the application folder and renamed
|
||||
* to stm32f1xx_hal_conf.h.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F1xx_HAL_CONF_H
|
||||
#define __STM32F1xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
#define HAL_CORTEX_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SPI_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#if defined(USE_STM3210C_EVAL)
|
||||
#define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */
|
||||
#else
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848 PHY Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
|
||||
#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */
|
||||
#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */
|
||||
#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */
|
||||
|
||||
#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
|
||||
|
||||
#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
|
||||
#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
|
||||
|
||||
#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
|
||||
#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 1U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "Legacy/stm32f1xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f1xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F1xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,169 @@
|
||||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32F207IGHx Device with
|
||||
** 1024KByte FLASH, 128KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
** (c)Copyright Ac6.
|
||||
** You may use this file as-is or modify it according to the needs of your
|
||||
** project. Distribution of this file (unmodified or modified) is not
|
||||
** permitted. Ac6 permit registered System Workbench for MCU users the
|
||||
** rights to distribute the assembled, compiled & linked contents of this
|
||||
** file as part of an application binary file, provided that it is built
|
||||
** using the System Workbench for MCU toolchain.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20020000; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,53 @@
|
||||
CFLAGS += \
|
||||
-DHSE_VALUE=8000000 \
|
||||
-DSTM32F207xx \
|
||||
-mthumb \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m3 \
|
||||
-mfloat-abi=soft \
|
||||
-nostdlib -nostartfiles \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32F2
|
||||
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=sign-compare
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F2xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F2xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/$(BOARD)/STM32F207ZGTx_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32f2xx.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f2xx_hal.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f2xx_hal_cortex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f2xx_hal_rcc.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f2xx_hal_rcc_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32f2xx_hal_gpio.c
|
||||
|
||||
SRC_S += \
|
||||
$(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s
|
||||
|
||||
INC += \
|
||||
$(TOP)/hw/mcu/st/st_driver/CMSIS/Include \
|
||||
$(TOP)/$(ST_CMSIS)/Include \
|
||||
$(TOP)/$(ST_HAL_DRIVER)/Inc \
|
||||
$(TOP)/hw/bsp/$(BOARD)
|
||||
|
||||
# For TinyUSB port source
|
||||
VENDOR = st
|
||||
CHIP_FAMILY = synopsys
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORT = ARM_CM3
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32f207zg
|
||||
JLINK_IF = swd
|
||||
|
||||
# Path to STM32 Cube Programmer CLI, should be added into system path
|
||||
STM32Prog = STM32_Programmer_CLI
|
||||
|
||||
# flash target using on-board stlink
|
||||
flash: $(BUILD)/$(BOARD)-firmware.elf
|
||||
$(STM32Prog) --connect port=swd --write $< --go
|
||||
@@ -0,0 +1,178 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "../board.h"
|
||||
|
||||
#include "stm32f2xx.h"
|
||||
#include "stm32f2xx_hal_conf.h"
|
||||
|
||||
#define LED_PORT GPIOB
|
||||
#define LED_PIN GPIO_PIN_14
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
#define BUTTON_PORT GPIOC
|
||||
#define BUTTON_PIN GPIO_PIN_13
|
||||
#define BUTTON_STATE_ACTIVE 1
|
||||
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* The system Clock is configured as follow :
|
||||
* System Clock source = PLL (HSE)
|
||||
* SYSCLK(Hz) = 120000000
|
||||
* HCLK(Hz) = 120000000
|
||||
* AHB Prescaler = 1
|
||||
* APB1 Prescaler = 4
|
||||
* APB2 Prescaler = 2
|
||||
* HSE Frequency(Hz) = 8000000
|
||||
* PLL_M = 8
|
||||
* PLL_N = 240
|
||||
* PLL_P = 2
|
||||
* PLL_Q = 5
|
||||
* VDD(V) = 3.3
|
||||
* Flash Latency(WS) = 3
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||
RCC_OscInitStruct.PLL.PLLN = 240;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 5;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||
clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
|
||||
}
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#endif
|
||||
|
||||
SystemClock_Config();
|
||||
|
||||
// Notify runtime of frequency change.
|
||||
SystemCoreClockUpdate();
|
||||
|
||||
// LED
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
GPIO_InitStruct.Pin = LED_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
|
||||
|
||||
// Button
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = BUTTON_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
|
||||
|
||||
/* Configure DM DP Pins */
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* Configure VBUS Pin */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* Configure ID pin */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* Enable USB FS Clocks */
|
||||
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
||||
void HardFault_Handler (void)
|
||||
{
|
||||
asm("bkpt");
|
||||
}
|
||||
|
||||
// Required by __libc_init_array in startup code if we are compiling using
|
||||
// -nostdlib/-nostartfiles.
|
||||
void _init(void)
|
||||
{
|
||||
|
||||
}
|
||||
@@ -0,0 +1,407 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f2xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F2xx_HAL_CONF_H
|
||||
#define __STM32F2xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
/* #define HAL_DMA_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
/* #define HAL_SD_MODULE_ENABLED */
|
||||
/* #define HAL_SPI_MODULE_ENABLED */
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
/* #define HAL_UART_MODULE_ENABLED */
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#if !defined (EXTERNAL_CLOCK_VALUE)
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB 5U /* 5 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* LAN8742A PHY Address*/
|
||||
#define LAN8742A_PHY_ADDRESS 0x00U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
|
||||
#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */
|
||||
|
||||
|
||||
#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */
|
||||
#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 1U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f2xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F2xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -9,11 +9,14 @@ CFLAGS += \
|
||||
-nostdlib -nostartfiles \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32F3
|
||||
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=unused-parameter
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F3xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F3xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld
|
||||
LD_FILE = hw/bsp/$(BOARD)/STM32F303VCTx_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32f3xx.c \
|
||||
|
||||
@@ -13,7 +13,7 @@ ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F4xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/stm32f407disco/STM32F407VGTx_FLASH.ld
|
||||
LD_FILE = hw/bsp/$(BOARD)/STM32F407VGTx_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32f4xx.c \
|
||||
|
||||
@@ -13,7 +13,7 @@ ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F4xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/stm32f411disco/STM32F411VETx_FLASH.ld
|
||||
LD_FILE = hw/bsp/$(BOARD)/STM32F411VETx_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32f4xx.c \
|
||||
|
||||
@@ -9,11 +9,14 @@ CFLAGS += \
|
||||
-nostdlib -nostartfiles \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32F4
|
||||
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=maybe-uninitialized
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F4xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/stm32f412disco/STM32F412ZGTx_FLASH.ld
|
||||
LD_FILE = hw/bsp/$(BOARD)/STM32F412ZGTx_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32f4xx.c \
|
||||
|
||||
@@ -9,8 +9,8 @@ CFLAGS += \
|
||||
-nostdlib -nostartfiles \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32F7
|
||||
|
||||
# The -Wno-error=sign-compare line is required due to STM32F7xx_HAL_Driver.
|
||||
CFLAGS += -Wno-error=shadow
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=shadow
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F7xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F7xx
|
||||
|
||||
@@ -174,15 +174,16 @@ uint32_t board_button_read(void)
|
||||
|
||||
int board_uart_read(uint8_t* buf, int len)
|
||||
{
|
||||
(void) buf; (void) len;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_uart_write(void const * buf, int len)
|
||||
{
|
||||
(void) buf; (void) len;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
|
||||
@@ -9,11 +9,14 @@ CFLAGS += \
|
||||
-nostdlib -nostartfiles \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32H7
|
||||
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=maybe-uninitialized
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32H7xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32H7xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/stm32h743nucleo/STM32H743ZITx_FLASH.ld
|
||||
LD_FILE = hw/bsp/$(BOARD)/STM32H743ZITx_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32h7xx.c \
|
||||
|
||||
@@ -197,11 +197,13 @@ uint32_t board_button_read(void)
|
||||
|
||||
int board_uart_read(uint8_t* buf, int len)
|
||||
{
|
||||
(void) buf; (void) len;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_uart_write(void const * buf, int len)
|
||||
{
|
||||
(void) buf; (void) len;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,169 @@
|
||||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32L053C8Tx Device with
|
||||
** 64KByte FLASH, 8KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
** (c)Copyright Ac6.
|
||||
** You may use this file as-is or modify it according to the needs of your
|
||||
** project. Distribution of this file (unmodified or modified) is not
|
||||
** permitted. Ac6 permit registered System Workbench for MCU users the
|
||||
** rights to distribute the assembled, compiled & linked contents of this
|
||||
** file as part of an application binary file, provided that it is built
|
||||
** using the System Workbench for MCU toolchain.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20002000; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x200; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,54 @@
|
||||
CFLAGS += \
|
||||
-DHSE_VALUE=8000000 \
|
||||
-DSTM32L053xx \
|
||||
-mthumb \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m0plus \
|
||||
-mfloat-abi=soft \
|
||||
-nostdlib -nostartfiles \
|
||||
-DCFG_EXAMPLE_MSC_READONLY \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32L0
|
||||
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32L0xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32L0xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/$(BOARD)/STM32L053C8Tx_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32l0xx.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l0xx_hal.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l0xx_hal_cortex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l0xx_hal_rcc.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l0xx_hal_rcc_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l0xx_hal_gpio.c
|
||||
|
||||
SRC_S += \
|
||||
$(ST_CMSIS)/Source/Templates/gcc/startup_stm32l053xx.s
|
||||
|
||||
INC += \
|
||||
$(TOP)/hw/mcu/st/st_driver/CMSIS/Include \
|
||||
$(TOP)/$(ST_CMSIS)/Include \
|
||||
$(TOP)/$(ST_HAL_DRIVER)/Inc \
|
||||
$(TOP)/hw/bsp/$(BOARD)
|
||||
|
||||
# For TinyUSB port source
|
||||
VENDOR = st
|
||||
CHIP_FAMILY = stm32_fsdev
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORT = ARM_CM0
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = STM32L053R8
|
||||
JLINK_IF = swd
|
||||
|
||||
# Path to STM32 Cube Programmer CLI, should be added into system path
|
||||
STM32Prog = STM32_Programmer_CLI
|
||||
|
||||
# flash target using on-board stlink
|
||||
flash: $(BUILD)/$(BOARD)-firmware.elf
|
||||
$(STM32Prog) --connect port=swd --write $< --go
|
||||
@@ -0,0 +1,187 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "../board.h"
|
||||
|
||||
#include "stm32l0xx.h"
|
||||
#include "stm32l0xx_hal_conf.h"
|
||||
|
||||
#define LED_PORT GPIOA
|
||||
#define LED_PIN GPIO_PIN_5
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
#define BUTTON_PORT GPIOA
|
||||
#define BUTTON_PIN GPIO_PIN_0
|
||||
#define BUTTON_STATE_ACTIVE 1
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* The system Clock is configured as follow:
|
||||
* HSI48 used as USB clock source
|
||||
* - System Clock source = HSI
|
||||
* - HSI Frequency(Hz) = 16000000
|
||||
* - SYSCLK(Hz) = 16000000
|
||||
* - HCLK(Hz) = 16000000
|
||||
* - AHB Prescaler = 1
|
||||
* - APB1 Prescaler = 1
|
||||
* - APB2 Prescaler = 1
|
||||
* - Flash Latency(WS) = 0
|
||||
* - Main regulator output voltage = Scale1 mode
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void SystemClock_Config(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
|
||||
static RCC_CRSInitTypeDef RCC_CRSInitStruct;
|
||||
|
||||
/* Enable HSI Oscillator to be used as System clock source
|
||||
Enable HSI48 Oscillator to be used as USB clock source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/* Select HSI48 as USB clock source */
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
|
||||
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
|
||||
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
|
||||
|
||||
/* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||
clock dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0);
|
||||
|
||||
/*Configure the clock recovery system (CRS)**********************************/
|
||||
|
||||
/*Enable CRS Clock*/
|
||||
__HAL_RCC_CRS_CLK_ENABLE();
|
||||
|
||||
/* Default Synchro Signal division factor (not divided) */
|
||||
RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
|
||||
/* Set the SYNCSRC[1:0] bits according to CRS_Source value */
|
||||
RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
|
||||
/* HSI48 is synchronized with USB SOF at 1KHz rate */
|
||||
RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000);
|
||||
RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT;
|
||||
/* Set the TRIM[5:0] to the default value*/
|
||||
RCC_CRSInitStruct.HSI48CalibrationValue = 0x20;
|
||||
/* Start automatic synchronization */
|
||||
HAL_RCCEx_CRSConfig (&RCC_CRSInitStruct);
|
||||
}
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
||||
//NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
||||
#endif
|
||||
|
||||
SystemClock_Config();
|
||||
|
||||
// Notify runtime of frequency change.
|
||||
SystemCoreClockUpdate();
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
// LED
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = LED_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||||
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
|
||||
|
||||
board_led_write(false);
|
||||
|
||||
// Button
|
||||
//__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = BUTTON_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||||
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
|
||||
|
||||
// USB
|
||||
/* Configure DM DP Pins */
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* Enable USB FS Clock */
|
||||
__HAL_RCC_USB_CLK_ENABLE();
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
||||
void HardFault_Handler (void)
|
||||
{
|
||||
asm("bkpt");
|
||||
}
|
||||
|
||||
// Required by __libc_init_array in startup code if we are compiling using
|
||||
// -nostdlib/-nostartfiles.
|
||||
void _init(void)
|
||||
{
|
||||
|
||||
}
|
||||
@@ -0,0 +1,331 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l0xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
*
|
||||
* Copyright (c) 2016 STMicroelectronics International N.V. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32L0xx_HAL_CONF_H
|
||||
#define __STM32L0xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
// #define HAL_ADC_MODULE_ENABLED
|
||||
/* #define HAL_COMP_MODULE_ENABLED */
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
/* #define HAL_FIREWALL_MODULE_ENABLED */
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
/* #define HAL_I2C_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LCD_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
//#define HAL_RNG_MODULE_ENABLED
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
//#define HAL_SPI_MODULE_ENABLED
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
/* #define HAL_TSC_MODULE_ENABLED */
|
||||
/* #define HAL_UART_MODULE_ENABLED */
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
//#define HAL_PCD_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
/* #define HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal Multiple Speed oscillator (MSI) default value.
|
||||
* This value is the default MSI range value after Reset.
|
||||
*/
|
||||
#if !defined (MSI_VALUE)
|
||||
#define MSI_VALUE ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* MSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator for USB (HSI48) value.
|
||||
*/
|
||||
#if !defined (HSI48_VALUE)
|
||||
#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
#endif /* HSI48_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Time out for LSE start up value in ms.
|
||||
*/
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define PREREAD_ENABLE 1U
|
||||
#define BUFFER_CACHE_DISABLE 0U
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1 */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 1U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_COMP_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_comp.h"
|
||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FIREWALL_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_firewall.h"
|
||||
#endif /* HAL_FIREWALL_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LCD_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_lcd.h"
|
||||
#endif /* HAL_LCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TSC_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_tsc.h"
|
||||
#endif /* HAL_TSC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32l0xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32L0xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,183 @@
|
||||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32L476VGTx Device with
|
||||
** 1024KByte FLASH, 96KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
** (c)Copyright Ac6.
|
||||
** You may use this file as-is or modify it according to the needs of your
|
||||
** project. Distribution of this file (unmodified or modified) is not
|
||||
** permitted. Ac6 permit registered System Workbench for MCU users the
|
||||
** rights to distribute the assembled, compiled & linked contents of this
|
||||
** file as part of an application binary file, provided that it is built
|
||||
** using the System Workbench for MCU toolchain.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20018000; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x500; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x1000; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(8);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
.ARM : {
|
||||
. = ALIGN(8);
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
.init_array :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
. = ALIGN(8);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(8);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(8);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(8);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,53 @@
|
||||
CFLAGS += \
|
||||
-DHSE_VALUE=8000000 \
|
||||
-DSTM32L476xx \
|
||||
-mthumb \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m4 \
|
||||
-mfloat-abi=hard \
|
||||
-mfpu=fpv4-sp-d16 \
|
||||
-nostdlib -nostartfiles \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_STM32L4
|
||||
|
||||
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32L4xx_HAL_Driver
|
||||
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32L4xx
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = hw/bsp/$(BOARD)/STM32L476VGTx_FLASH.ld
|
||||
|
||||
SRC_C += \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32l4xx.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l4xx_hal.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l4xx_hal_cortex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l4xx_hal_rcc.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l4xx_hal_rcc_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l4xx_hal_pwr.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l4xx_hal_pwr_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32l4xx_hal_gpio.c
|
||||
|
||||
SRC_S += \
|
||||
$(ST_CMSIS)/Source/Templates/gcc/startup_stm32l476xx.s
|
||||
|
||||
INC += \
|
||||
$(TOP)/hw/mcu/st/st_driver/CMSIS/Include \
|
||||
$(TOP)/$(ST_CMSIS)/Include \
|
||||
$(TOP)/$(ST_HAL_DRIVER)/Inc \
|
||||
$(TOP)/hw/bsp/$(BOARD)
|
||||
|
||||
# For TinyUSB port source
|
||||
VENDOR = st
|
||||
CHIP_FAMILY = synopsys
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORT = ARM_CM4F
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32l476vg
|
||||
JLINK_IF = swd
|
||||
|
||||
# Path to STM32 Cube Programmer CLI, should be added into system path
|
||||
STM32Prog = STM32_Programmer_CLI
|
||||
|
||||
# flash target using on-board stlink
|
||||
flash: $(BUILD)/$(BOARD)-firmware.elf
|
||||
$(STM32Prog) --connect port=swd --write $< --go
|
||||
@@ -0,0 +1,217 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "../board.h"
|
||||
|
||||
#include "stm32l4xx.h"
|
||||
#include "stm32l4xx_hal_conf.h"
|
||||
|
||||
#define LED_PORT GPIOB
|
||||
#define LED_PIN GPIO_PIN_2
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
#define BUTTON_PORT GPIOA
|
||||
#define BUTTON_PIN GPIO_PIN_0
|
||||
#define BUTTON_STATE_ACTIVE 1
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* The system Clock is configured as follow :
|
||||
*
|
||||
* If define USB_USE_LSE_MSI_CLOCK enabled:
|
||||
* System Clock source = PLL (MSI)
|
||||
* SYSCLK(Hz) = 80000000
|
||||
* HCLK(Hz) = 80000000
|
||||
* AHB Prescaler = 1
|
||||
* APB1 Prescaler = 1
|
||||
* APB2 Prescaler = 2
|
||||
* MSI Frequency(Hz) = 4800000
|
||||
* LSE Frequency(Hz) = 32768
|
||||
* PLL_M = 6
|
||||
* PLL_N = 40
|
||||
* PLL_P = 7
|
||||
* PLL_Q = 4
|
||||
* PLL_R = 4
|
||||
* Flash Latency(WS) = 4
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
static void SystemClock_Config(void)
|
||||
{
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
|
||||
|
||||
/* Enable the LSE Oscilator */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
|
||||
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/* Enable the CSS interrupt in case LSE signal is corrupted or not present */
|
||||
HAL_RCCEx_DisableLSECSS();
|
||||
|
||||
/* Enable MSI Oscillator and activate PLL with MSI as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
|
||||
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
|
||||
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI;
|
||||
RCC_OscInitStruct.PLL.PLLM = 6;
|
||||
RCC_OscInitStruct.PLL.PLLN = 40;
|
||||
RCC_OscInitStruct.PLL.PLLP = 7;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 4;
|
||||
RCC_OscInitStruct.PLL.PLLR = 4;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/* Enable MSI Auto-calibration through LSE */
|
||||
HAL_RCCEx_EnableMSIPLLMode();
|
||||
|
||||
/* Select MSI output as USB clock source */
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
|
||||
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI;
|
||||
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||
clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
|
||||
}
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
||||
//NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
||||
#endif
|
||||
|
||||
SystemClock_Config();
|
||||
|
||||
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_MSI, RCC_MCODIV_1);//RCC_MCO1SOURCE_SYSCLK
|
||||
|
||||
/* Enable Power Clock*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* Enable USB power on Pwrctrl CR2 register */
|
||||
HAL_PWREx_EnableVddUSB();
|
||||
|
||||
// Notify runtime of frequency change.
|
||||
SystemCoreClockUpdate();
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
// LED
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = LED_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||||
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
|
||||
|
||||
board_led_write(false);
|
||||
|
||||
// Button
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = BUTTON_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
||||
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
|
||||
|
||||
// USB
|
||||
/* Configure DM DP Pins */
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* Configure VBUS Pin */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* This for ID line */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_12;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* Enable USB FS Clock */
|
||||
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler (void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
|
||||
void HardFault_Handler (void)
|
||||
{
|
||||
asm("bkpt");
|
||||
}
|
||||
|
||||
// Required by __libc_init_array in startup code if we are compiling using
|
||||
// -nostdlib/-nostartfiles.
|
||||
void _init(void)
|
||||
{
|
||||
|
||||
}
|
||||
@@ -0,0 +1,380 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l4xx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration template file.
|
||||
* This file should be copied to the application folder and renamed
|
||||
* to stm32l4xx_hal_conf.h.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32L4xx_HAL_CONF_H
|
||||
#define __STM32L4xx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
/* #define HAL_ADC_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
/* #define HAL_COMP_MODULE_ENABLED */
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
/* #define HAL_CRC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
/* #define HAL_DAC_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
/* #define HAL_FIREWALL_MODULE_ENABLED */
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
#define HAL_NOR_MODULE_ENABLED
|
||||
#define HAL_SRAM_MODULE_ENABLED
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
//#define HAL_I2C_MODULE_ENABLED
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
//#define HAL_LCD_MODULE_ENABLED
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_OPAMP_MODULE_ENABLED */
|
||||
//#define HAL_PCD_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
/* #define HAL_RTC_MODULE_ENABLED */
|
||||
//#define HAL_SAI_MODULE_ENABLED
|
||||
//#define HAL_SD_MODULE_ENABLED
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_SPI_MODULE_ENABLED */
|
||||
/* #define HAL_SWPMI_MODULE_ENABLED */
|
||||
/* #define HAL_TIM_MODULE_ENABLED */
|
||||
/* #define HAL_TSC_MODULE_ENABLED */
|
||||
//#define HAL_UART_MODULE_ENABLED
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal Multiple Speed oscillator (MSI) default value.
|
||||
* This value is the default MSI range value after Reset.
|
||||
*/
|
||||
#if !defined (MSI_VALUE)
|
||||
#define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* MSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
|
||||
* This internal oscillator is mainly dedicated to provide a high precision clock to
|
||||
* the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
|
||||
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
|
||||
* which is subject to manufacturing process variations.
|
||||
*/
|
||||
#if !defined (HSI48_VALUE)
|
||||
#define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
|
||||
The real value my vary depending on manufacturing process variations.*/
|
||||
#endif /* HSI48_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#if !defined (LSI_VALUE)
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined (LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for SAI1 peripheral
|
||||
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
|
||||
#define EXTERNAL_SAI1_CLOCK_VALUE 48000U /*!< Value of the SAI1 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
|
||||
|
||||
/**
|
||||
* @brief External clock source for SAI2 peripheral
|
||||
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
|
||||
#define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_SAI2_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 0U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 1U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "Legacy/stm32l4xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_COMP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_comp.h"
|
||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FIREWALL_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_firewall.h"
|
||||
#endif /* HAL_FIREWALL_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_lcd.h"
|
||||
#endif /* HAL_LCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_OPAMP_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_opamp.h"
|
||||
#endif /* HAL_OPAMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SWPMI_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_swpmi.h"
|
||||
#endif /* HAL_SWPMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TSC_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_tsc.h"
|
||||
#endif /* HAL_TSC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32l4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32L4xx_HAL_CONF_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,52 +0,0 @@
|
||||
This README describes the layout of system files and headers for
|
||||
microcontrollers supported by tinyusb from the vendor [ST](www.st.com).
|
||||
|
||||
The CMSIS by ARM is an attempt to unify how system initialization and headers
|
||||
for ARM microcontrollers are handled across vendors. A vendor is expected to
|
||||
provide a number of files, including vendor-specific device headers,
|
||||
vendor-specific system init code (in C), vendor-specific startup code (coded in
|
||||
assembly _and_ meant to make writing C interrupt handlers easy), and ARM
|
||||
architecture-specific headers. In practice, it's actually difficult to find all
|
||||
these files in one place.
|
||||
|
||||
* stm32cube generates a self-contained application. All the relevant headers,
|
||||
system init, and startup code are under `Drivers/CMSIS`. The linker script is
|
||||
stored at the root of your project, _along_ with a copy of the startup code.
|
||||
Relative to `Drivers/CMSIS`:
|
||||
* Device header files are stored under `Device/ST/$family/Include`.
|
||||
* Arm-provided CMSIS headers are stored under `Include`.
|
||||
* The portable C portion of the startup code, called `system_$family.c`, is
|
||||
stored under `Device/ST/$family/Source/Templates`. This "system init" code
|
||||
is required by CMSIS.
|
||||
* The assembly portion of the startup code, called `startup_$device.c`, is
|
||||
stored under `Device\ST\STM32F4xx\Source\Templates\gcc`.
|
||||
|
||||
* Micropython maintains [a repo](https://github.com/micropython/stm32lib)
|
||||
with _only_ the device header files. We use that
|
||||
repo and provide the remaining files ourselves.
|
||||
* Micropython keeps the linker script and assembly portion of the startup
|
||||
code under the
|
||||
[boards](https://github.com/micropython/micropython/tree/master/ports/stm32/boards)
|
||||
directory in the stm32 port (but the code is board agnostic).
|
||||
* Micropython also embeds its own
|
||||
[copy](https://github.com/micropython/micropython/tree/master/lib/cmsis/inc)
|
||||
of CMSIS headers for all ARM targets into the repo.
|
||||
* Micropython indeed _does_ use their own custom C startup code (CMSIS system
|
||||
init) for
|
||||
[stm32](https://github.com/micropython/micropython/blob/master/ports/stm32/system_stm32.c)
|
||||
targets. It is
|
||||
[missing](https://github.com/micropython/micropython/commit/fdbc22e4d27b9d1c686647c9c67a32206f7bc83a)
|
||||
the `SystemCoreClockUpdate` function.
|
||||
|
||||
* TinyUSB uses Micropython's [stm32lib](stm32lib) as a submodule to provide
|
||||
device headers. The remaining system files can be found in the following
|
||||
directories:
|
||||
* C system init code is in the [system-init](system-init) directory.
|
||||
* Assembly startup code is in the [startup](startup) directory. Each family
|
||||
gets its own subdirectory under startup (e.g. [stm32f4](startup/stm32f4)).
|
||||
* ARM-provided headers are stored in the [cmsis](cmsis) directory.
|
||||
* The linker script for the STM32F4-DISCOVERY board demo is supplied as
|
||||
part of TinyUSB's
|
||||
[Board Support Packages](../../bsp/stm32f407disco/STM32F407VGTx_FLASH.ld).
|
||||
The above files were extracted from a dummy stm32cube project in February
|
||||
2019.
|
||||
Reference in New Issue
Block a user