jesus/tinyusb
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

support bcm2711 on pi4, enhance dcd init with utmi and ulpi hs phy

Browse Source
This commit is contained in:
hathach
2021-10-28 12:52:18 +07:00
parent 49aa69a301
commit 7def380058
8 changed files with 242 additions and 102 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/portable/synopsys/dwc2/dwc2_stm32.h
+45 -4
View File
@@ -113,14 +113,14 @@ static inline void dwc2_remote_wakeup_delay(void)
}
// Set turn-around timeout according to link speed
static inline void dwc2_set_turnaround(dwc2_regs_t * core, tusb_speed_t speed)
static inline void dwc2_set_turnaround(dwc2_regs_t * dwc2, tusb_speed_t speed)
{
core->gusbcfg &= ~GUSBCFG_TRDT;
dwc2->gusbcfg &= ~GUSBCFG_TRDT;
if ( speed == TUSB_SPEED_HIGH )
{
// Use fixed 0x09 for Highspeed
core->gusbcfg |= (0x09 << GUSBCFG_TRDT_Pos);
dwc2->gusbcfg |= (0x09 << GUSBCFG_TRDT_Pos);
}
else
{
@@ -149,11 +149,52 @@ static inline void dwc2_set_turnaround(dwc2_regs_t * core, tusb_speed_t speed)
turnaround = 0xFU;
// Fullspeed depends on MCU clocks, but we will use 0x06 for 32+ Mhz
core->gusbcfg |= (turnaround << GUSBCFG_TRDT_Pos);
dwc2->gusbcfg |= (turnaround << GUSBCFG_TRDT_Pos);
}
}
#if defined(USB_HS_PHYC)
static inline void dwc2_stm32_utmi_phy_init(dwc2_regs_t * dwc2)
{
USB_HS_PHYC_GlobalTypeDef *usb_hs_phyc = (USB_HS_PHYC_GlobalTypeDef*) USB_HS_PHYC_CONTROLLER_BASE;
// Enable UTMI HS PHY
dwc2->stm32_gccfg |= STM32_GCCFG_PHYHSEN;
// Enable LDO
usb_hs_phyc->USB_HS_PHYC_LDO |= USB_HS_PHYC_LDO_ENABLE;
// Wait until LDO ready
while ( 0 == (usb_hs_phyc->USB_HS_PHYC_LDO & USB_HS_PHYC_LDO_STATUS) ) {}
uint32_t phyc_pll = 0;
// TODO Try to get HSE_VALUE from registers instead of depending CFLAGS
switch ( HSE_VALUE )
{
case 12000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_12MHZ ; break;
case 12500000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_12_5MHZ ; break;
case 16000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_16MHZ ; break;
case 24000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_24MHZ ; break;
case 25000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_25MHZ ; break;
case 32000000: phyc_pll = USB_HS_PHYC_PLL1_PLLSEL_Msk ; break; // Value not defined in header
default:
TU_ASSERT(false, );
}
usb_hs_phyc->USB_HS_PHYC_PLL = phyc_pll;
// Control the tuning interface of the High Speed PHY
// Use magic value (USB_HS_PHYC_TUNE_VALUE) from ST driver
usb_hs_phyc->USB_HS_PHYC_TUNE |= 0x00000F13U;
// Enable PLL internal PHY
usb_hs_phyc->USB_HS_PHYC_PLL |= USB_HS_PHYC_PLL_PLLEN;
// Original ST code has 2 ms delay for PLL stabilization.
// Primitive test shows that more than 10 USB un/replug cycle showed no error with enumeration
}
#endif
#ifdef __cplusplus
}