From 95f2478146ef83d18b52408c0692222bf2a15053 Mon Sep 17 00:00:00 2001 From: graham sanderson Date: Sun, 30 May 2021 18:41:07 -0500 Subject: [PATCH] Rework rp2040 examples and CMake build: - Examples should be CMake buildable from their own subdirectory; such a build will error out based on matching .skip.MCU_xxx or a mismatched .only.MCU_ - It should be possible to build from a higher level and use .skip.MCU_ and .only.MCU_ to filter which examples get built - The intention is for the CMakeLists.txts in the examples to be non family specific and without MCU based IFs. I have started this work, but am not really sure the state of the esp32 stuff; in any case the plan is to have everything encapsulated in the FAMILY/family.cmake - pico_examples now just includes examples/device/CMakeLists.txt and examples/host/CMakeLists.txt directly, as they also build correctly when included from there. Note that .skip.MCU_ for esp32 in the directories it wasn't previously avaiable has not been added, as the .skip is common to the regular Makefile builds also. It isn't clear whether these examples should build for esp32, but if not .skip should be added. --- examples/device/CMakeLists.txt | 27 ++++ .../device/audio_4_channel_mic/CMakeLists.txt | 51 +++--- examples/device/audio_test/CMakeLists.txt | 51 +++--- examples/device/board_test/CMakeLists.txt | 47 +++--- examples/device/cdc_dual_ports/CMakeLists.txt | 49 +++--- examples/device/cdc_msc/CMakeLists.txt | 51 +++--- examples/device/dfu/CMakeLists.txt | 49 +++--- examples/device/dfu_runtime/CMakeLists.txt | 51 +++--- .../dynamic_configuration/CMakeLists.txt | 51 +++--- examples/device/hid_composite/CMakeLists.txt | 49 +++--- .../device/hid_generic_inout/CMakeLists.txt | 51 +++--- .../hid_multiple_interface/CMakeLists.txt | 51 +++--- examples/device/midi_test/CMakeLists.txt | 51 +++--- examples/device/msc_dual_lun/CMakeLists.txt | 53 +++---- .../device/net_lwip_webserver/CMakeLists.txt | 146 +++++++++--------- examples/device/uac2_headset/CMakeLists.txt | 51 +++--- examples/device/usbtmc/CMakeLists.txt | 51 +++--- examples/device/webusb_serial/CMakeLists.txt | 51 +++--- examples/host/CMakeLists.txt | 9 ++ examples/host/cdc_msc_hid/CMakeLists.txt | 53 +++---- hw/bsp/esp32s2/family.cmake | 4 + hw/bsp/esp32s3/family.cmake | 4 + hw/bsp/family.cmake | 61 ++++++++ .../{boards/raspberry_pi_pico => }/board.h | 12 +- .../adafruit_feather_rp2040/board.cmake | 1 - .../boards/adafruit_feather_rp2040/board.h | 53 ------- .../adafruit_itsybitsy_rp2040/board.cmake | 1 - .../boards/adafruit_itsybitsy_rp2040/board.h | 53 ------- .../boards/adafruit_qt_rp2040/board.cmake | 1 - .../rp2040/boards/adafruit_qt_rp2040/board.h | 55 ------- .../boards/raspberry_pi_pico/board.cmake | 1 - hw/bsp/rp2040/family.c | 15 +- hw/bsp/rp2040/family.cmake | 128 +++++++-------- hw/mcu/microchip | 2 +- hw/mcu/sony/cxd56/spresense-exported-sdk | 2 +- lib/lwip | 2 +- 36 files changed, 616 insertions(+), 822 deletions(-) create mode 100644 examples/device/CMakeLists.txt create mode 100644 examples/host/CMakeLists.txt create mode 100644 hw/bsp/family.cmake rename hw/bsp/rp2040/{boards/raspberry_pi_pico => }/board.h (80%) delete mode 100644 hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake delete mode 100644 hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.h delete mode 100644 hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake delete mode 100644 hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.h delete mode 100644 hw/bsp/rp2040/boards/adafruit_qt_rp2040/board.cmake delete mode 100644 hw/bsp/rp2040/boards/adafruit_qt_rp2040/board.h delete mode 100644 hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt new file mode 100644 index 00000000..4ed693cd --- /dev/null +++ b/examples/device/CMakeLists.txt @@ -0,0 +1,27 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/${FAMILY}/family.cmake) + +project(tinyusb_device_examples) +family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR}) + +# family_add_subdirectory will filter what to actually add based on selected FAMILY +family_add_subdirectory(audio_4_channel_mic) +family_add_subdirectory(audio_test) +family_add_subdirectory(board_test) +family_add_subdirectory(cdc_dual_ports) +family_add_subdirectory(cdc_msc) +family_add_subdirectory(cdc_msc_freertos) +family_add_subdirectory(dfu) +family_add_subdirectory(dfu_runtime) +family_add_subdirectory(dynamic_configuration) +family_add_subdirectory(hid_composite) +family_add_subdirectory(hid_composite_freertos) +family_add_subdirectory(hid_generic_inout) +family_add_subdirectory(hid_multiple_interface) +family_add_subdirectory(midi_test) +family_add_subdirectory(msc_dual_lun) +family_add_subdirectory(net_lwip_webserver) +family_add_subdirectory(uac2_headset) +family_add_subdirectory(usbtmc) +family_add_subdirectory(webusb_serial) diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index f2c81c4d..b653fc91 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -1,37 +1,28 @@ -# use BOARD-Directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c +) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src +) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index f2c81c4d..fac0ca64 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -1,37 +1,28 @@ -# use BOARD-Directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c +) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src +) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index c41ad92a..5bb8cb70 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -1,44 +1,41 @@ cmake_minimum_required(VERSION 3.5) -# use BOARD-Directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) - -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) # Check for -DFAMILY= if(FAMILY MATCHES "^esp32s[2-3]") - cmake_minimum_required(VERSION 3.5) + # use BOARD-Directory name for project id + get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) + set(PROJECT ${BOARD}-${PROJECT}) + + # TOP is absolute path to root directory of TinyUSB git repo + set(TOP "../../..") + get_filename_component(TOP "${TOP}" REALPATH) include(${TOP}/hw/bsp/${FAMILY}/family.cmake) project(${PROJECT}) -elseif(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) +else() + + # Family chooses name based on passed name and vars (e.g. -) + get_filename_component(DIR_NAME ${CMAKE_CURRENT_SOURCE_DIR} NAME) + family_get_project_name(PROJECT "${DIR_NAME}") + project(${PROJECT}) + add_executable(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) - # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) # Example include target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) - -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") + # Configure compilation flags and libraries for the example... see the corresponding function + # in hw/bsp/FAMILY/family.cmake for details. + family_configure_device_example(${PROJECT}) endif() diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index 4160c0c8..18367a89 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 6c828a39..5da761a0 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index 4160c0c8..18367a89 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index 2bac7c32..18367a89 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index a99b755d..5da761a0 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index 3b677b3b..18367a89 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index 2bac7c32..18367a89 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index 2bac7c32..18367a89 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index 2bac7c32..18367a89 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index 8b472227..f60be8ed 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk_dual.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 4325b4ea..63cca04a 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -1,84 +1,82 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +include(${TOP}/hw/bsp/${FAMILY}/family.cmake) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - # lwip Stack source - set(SRC_LWIP - ${TOP}/lib/lwip/src/core/altcp.c - ${TOP}/lib/lwip/src/core/altcp_alloc.c - ${TOP}/lib/lwip/src/core/altcp_tcp.c - ${TOP}/lib/lwip/src/core/def.c - ${TOP}/lib/lwip/src/core/dns.c - ${TOP}/lib/lwip/src/core/inet_chksum.c - ${TOP}/lib/lwip/src/core/init.c - ${TOP}/lib/lwip/src/core/ip.c - ${TOP}/lib/lwip/src/core/mem.c - ${TOP}/lib/lwip/src/core/memp.c - ${TOP}/lib/lwip/src/core/netif.c - ${TOP}/lib/lwip/src/core/pbuf.c - ${TOP}/lib/lwip/src/core/raw.c - ${TOP}/lib/lwip/src/core/stats.c - ${TOP}/lib/lwip/src/core/sys.c - ${TOP}/lib/lwip/src/core/tcp.c - ${TOP}/lib/lwip/src/core/tcp_in.c - ${TOP}/lib/lwip/src/core/tcp_out.c - ${TOP}/lib/lwip/src/core/timeouts.c - ${TOP}/lib/lwip/src/core/udp.c - ${TOP}/lib/lwip/src/core/ipv4/autoip.c - ${TOP}/lib/lwip/src/core/ipv4/dhcp.c - ${TOP}/lib/lwip/src/core/ipv4/etharp.c - ${TOP}/lib/lwip/src/core/ipv4/icmp.c - ${TOP}/lib/lwip/src/core/ipv4/igmp.c - ${TOP}/lib/lwip/src/core/ipv4/ip4.c - ${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c - ${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c - ${TOP}/lib/lwip/src/netif/ethernet.c - ${TOP}/lib/lwip/src/netif/slipif.c - ${TOP}/lib/lwip/src/apps/http/httpd.c - ${TOP}/lib/lwip/src/apps/http/fs.c - ${TOP}/lib/networking/dhserver.c - ${TOP}/lib/networking/dnserver.c - ${TOP}/lib/networking/rndis_reports.c - ) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ${SRC_LWIP} - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ${TOP}/lib/lwip/src/include + ${TOP}/lib/lwip/src/include/ipv4 + ${TOP}/lib/lwip/src/include/lwip/apps + ${TOP}/lib/networking + ) + +target_sources(${PROJECT} PUBLIC + ${TOP}/lib/lwip/src/core/altcp.c + ${TOP}/lib/lwip/src/core/altcp_alloc.c + ${TOP}/lib/lwip/src/core/altcp_tcp.c + ${TOP}/lib/lwip/src/core/def.c + ${TOP}/lib/lwip/src/core/dns.c + ${TOP}/lib/lwip/src/core/inet_chksum.c + ${TOP}/lib/lwip/src/core/init.c + ${TOP}/lib/lwip/src/core/ip.c + ${TOP}/lib/lwip/src/core/mem.c + ${TOP}/lib/lwip/src/core/memp.c + ${TOP}/lib/lwip/src/core/netif.c + ${TOP}/lib/lwip/src/core/pbuf.c + ${TOP}/lib/lwip/src/core/raw.c + ${TOP}/lib/lwip/src/core/stats.c + ${TOP}/lib/lwip/src/core/sys.c + ${TOP}/lib/lwip/src/core/tcp.c + ${TOP}/lib/lwip/src/core/tcp_in.c + ${TOP}/lib/lwip/src/core/tcp_out.c + ${TOP}/lib/lwip/src/core/timeouts.c + ${TOP}/lib/lwip/src/core/udp.c + ${TOP}/lib/lwip/src/core/ipv4/autoip.c + ${TOP}/lib/lwip/src/core/ipv4/dhcp.c + ${TOP}/lib/lwip/src/core/ipv4/etharp.c + ${TOP}/lib/lwip/src/core/ipv4/icmp.c + ${TOP}/lib/lwip/src/core/ipv4/igmp.c + ${TOP}/lib/lwip/src/core/ipv4/ip4.c + ${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c + ${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c + ${TOP}/lib/lwip/src/netif/ethernet.c + ${TOP}/lib/lwip/src/netif/slipif.c + ${TOP}/lib/lwip/src/apps/http/httpd.c + ${TOP}/lib/lwip/src/apps/http/fs.c + ${TOP}/lib/networking/dhserver.c + ${TOP}/lib/networking/dnserver.c + ${TOP}/lib/networking/rndis_reports.c + ) + +target_compile_definitions(${PROJECT} PUBLIC + PBUF_POOL_SIZE=2 + TCP_WND=2*TCP_MSS + HTTPD_USE_CUSTOM_FSDATA=0 +) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ${TOP}/lib/lwip/src/include - ${TOP}/lib/lwip/src/include/ipv4 - ${TOP}/lib/lwip/src/include/lwip/apps - ${TOP}/lib/networking - ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - PBUF_POOL_SIZE=2 - TCP_WND=2*TCP_MSS - HTTPD_USE_CUSTOM_FSDATA=0 - ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index 2bac7c32..18367a89 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index c14595db..4306da8c 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +project(${PROJECT}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c - ) +add_executable(${PROJECT}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c + ) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index 2bac7c32..18367a89 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -1,37 +1,28 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt new file mode 100644 index 00000000..c70d11d5 --- /dev/null +++ b/examples/host/CMakeLists.txt @@ -0,0 +1,9 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/${FAMILY}/family.cmake) + +project(tinyusb_host_examples) +family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR}) + +# family_add_subdirectory will filter what to actually add based on selected FAMILY +family_add_subdirectory(cdc_msc_hid) diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index ac57bf6d..ad0f412e 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -1,38 +1,29 @@ -# use directory name for project id -get_filename_component(PROJECT ${CMAKE_CURRENT_SOURCE_DIR} NAME) -set(PROJECT ${BOARD}-${PROJECT}) +cmake_minimum_required(VERSION 3.5) -# TOP is absolute path to root directory of TinyUSB git repo -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/${FAMILY}/family.cmake) -# Check for -DFAMILY= -if(FAMILY STREQUAL "rp2040") - cmake_minimum_required(VERSION 3.12) - - include(${TOP}/hw/bsp/${FAMILY}/pico_sdk_import.cmake) - project(${PROJECT}) - add_executable(${PROJECT}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - include(${TOP}/hw/bsp/${FAMILY}/family.cmake) +project(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c - ) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) +add_executable(${PROJECT}) - # Example defines - target_compile_definitions(${PROJECT} PUBLIC - CFG_TUSB_OS=OPT_OS_PICO - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c + ) -else() - message(FATAL_ERROR "Invalid FAMILY specified: ${FAMILY}") -endif() +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT}) \ No newline at end of file diff --git a/hw/bsp/esp32s2/family.cmake b/hw/bsp/esp32s2/family.cmake index c19221b1..656f7d85 100644 --- a/hw/bsp/esp32s2/family.cmake +++ b/hw/bsp/esp32s2/family.cmake @@ -4,3 +4,7 @@ cmake_minimum_required(VERSION 3.5) set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s2) + +# include basic family CMake functionality +set(FAMILY_MCUS esp32s2 ESP32S2) +include(${CMAKE_CURRENT_LIST_DIR}/../family.cmake) diff --git a/hw/bsp/esp32s3/family.cmake b/hw/bsp/esp32s3/family.cmake index 558ec575..e57920bf 100644 --- a/hw/bsp/esp32s3/family.cmake +++ b/hw/bsp/esp32s3/family.cmake @@ -4,3 +4,7 @@ cmake_minimum_required(VERSION 3.5) set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s3) + +# include basic family CMake functionality +set(FAMILY_MCUS esp32s3 ESP32S3) # TODO MERGE THIS WITH supported targets? +include(${CMAKE_CURRENT_LIST_DIR}/../family.cmake) diff --git a/hw/bsp/family.cmake b/hw/bsp/family.cmake new file mode 100644 index 00000000..12439967 --- /dev/null +++ b/hw/bsp/family.cmake @@ -0,0 +1,61 @@ +if (NOT FAMILY_MCUS) + set(FAMILY_MCUS ${FAMILY}) +endif() + +# save it in case of re-inclusion +set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") + +function(family_filter RESULT DIR) + get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR}) + file(GLOB ONLYS "${DIR}/.only.MCU_*") + if (ONLYS) + foreach(MCU IN LISTS FAMILY_MCUS) + if (EXISTS ${DIR}/.only.MCU_${MCU}) + set(${RESULT} 1 PARENT_SCOPE) + return() + endif() + endforeach() + else() + foreach(MCU IN LISTS FAMILY_MCUS) + if (EXISTS ${DIR}/.skip.MCU_${MCU}) + set(${RESULT} 0 PARENT_SCOPE) + return() + endif() + endforeach() + endif() + set(${RESULT} 1 PARENT_SCOPE) +endfunction() + +function(family_add_subdirectory DIR) + family_filter(SHOULD_ADD "${DIR}") + if (SHOULD_ADD) + add_subdirectory(${DIR}) + endif() +endfunction() + +function(family_get_project_name OUTPUT_NAME DIR) + get_filename_component(SHORT_NAME ${DIR} NAME) + if (TINYUSB_FAMILY_PROJECT_NAME_INCLUDES_BOARD OR NOT DEFINED TINYUSB_FAMILY_PROJECT_NAME_INCLUDES_BOARD) + set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${BOARD}-${SHORT_NAME} PARENT_SCOPE) + else() + set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${SHORT_NAME} PARENT_SCOPE) + endif() +endfunction() + +function(family_initialize_project PROJECT DIR) + family_filter(ALLOWED "${DIR}") + if (NOT ALLOWED) + get_filename_component(SHORT_NAME ${DIR} NAME) + message(FATAL_ERROR "${SHORT_NAME} is not supported on FAMILY=${FAMILY}") + endif() +endfunction() + +# configure an executable target to link to tinyusb in device mode, and add the board implementation +function(family_configure_device_example TARGET) + # default implentation is empty, the function should be redefined in the FAMILY/family.cmake +endfunction() + +# configure an executable target to link to tinyusb in host mode, and add the board implementation +function(family_configure_host_example TARGET) + # default implentation is empty, the function should be redefined in the FAMILY/family.cmake +endfunction() diff --git a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.h b/hw/bsp/rp2040/board.h similarity index 80% rename from hw/bsp/rp2040/boards/raspberry_pi_pico/board.h rename to hw/bsp/rp2040/board.h index e4a6514a..237f29dc 100644 --- a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.h +++ b/hw/bsp/rp2040/board.h @@ -31,16 +31,20 @@ extern "C" { #endif +#ifdef PICO_DEFAULT_LED_PIN #define LED_PIN PICO_DEFAULT_LED_PIN -#define LED_STATE_ON 1 +#define LED_STATE_ON (!(PICO_DEFAULT_LED_PIN_INVERTED)) +#endif // Button pin is BOOTSEL which is flash CS pin #define BUTTON_BOOTSEL #define BUTTON_STATE_ACTIVE 0 -#define UART_DEV uart0 -#define UART_TX_PIN 0 -#define UART_RX_PIN 1 +#if defined(PICO_DEFAULT_UART_TX_PIN) && defined(PICO_DEFAULT_UART_RX_PIN) && defined(PICO_DEFAULT_UART) +#define UART_DEV PICO_DEFAULT_UART +#define UART_TX_PIN PICO_DEFAULT_UART_TX_PIN +#define UART_RX_PIN PICO_DEFAULT_UART_RX_PIN +#endif #ifdef __cplusplus } diff --git a/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake b/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake deleted file mode 100644 index ea4070cf..00000000 --- a/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_DEFAULT_BOOT_STAGE2_FILE "${PICO_SDK_PATH}/src/rp2_common/boot_stage2/boot2_generic_03h.S") diff --git a/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.h b/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.h deleted file mode 100644 index 281b215d..00000000 --- a/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PIN 13 -#define LED_STATE_ON 1 - -#define NEOPIXEL_PIN 16 -#define NEOPIXEL_POWER_PIN 17 -#define NEOPIXEL_POWER_STATE 1 - -// Button pin is BOOTSEL which is flash CS pin -#define BUTTON_BOOTSEL -#define BUTTON_STATE_ACTIVE 0 - -#define UART_DEV uart0 -#define UART_TX_PIN 0 -#define UART_RX_PIN 1 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake b/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake deleted file mode 100644 index eb9f219d..00000000 --- a/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_DEFAULT_BOOT_STAGE2_FILE "${PICO_SDK_PATH}/src/rp2_common/boot_stage2/boot2_w25q080.S") diff --git a/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.h b/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.h deleted file mode 100644 index 72265176..00000000 --- a/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define LED_PIN 11 -#define LED_STATE_ON 1 - -#define NEOPIXEL_PIN 17 -#define NEOPIXEL_POWER_PIN 16 -#define NEOPIXEL_POWER_STATE 1 - -// Button pin is BOOTSEL which is flash CS pin -#define BUTTON_BOOTSEL -#define BUTTON_STATE_ACTIVE 0 - -#define UART_DEV uart0 -#define UART_TX_PIN 0 -#define UART_RX_PIN 1 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/rp2040/boards/adafruit_qt_rp2040/board.cmake b/hw/bsp/rp2040/boards/adafruit_qt_rp2040/board.cmake deleted file mode 100644 index eb9f219d..00000000 --- a/hw/bsp/rp2040/boards/adafruit_qt_rp2040/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_DEFAULT_BOOT_STAGE2_FILE "${PICO_SDK_PATH}/src/rp2_common/boot_stage2/boot2_w25q080.S") diff --git a/hw/bsp/rp2040/boards/adafruit_qt_rp2040/board.h b/hw/bsp/rp2040/boards/adafruit_qt_rp2040/board.h deleted file mode 100644 index c0915f70..00000000 --- a/hw/bsp/rp2040/boards/adafruit_qt_rp2040/board.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// TODO QT RP2040 only has neopixel -#define LED_PIN 11 -#define LED_STATE_ON 1 - -#define NEOPIXEL_PIN 12 -#define NEOPIXEL_POWER_PIN 11 -#define NEOPIXEL_POWER_STATE 1 - -// Button pin is BOOTSEL which is flash CS pin -#define BUTTON_BOOTSEL -#define BUTTON_STATE_ACTIVE 0 - - -#define UART_DEV uart0 -#define UART_TX_PIN 0 -#define UART_RX_PIN 1 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake b/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake deleted file mode 100644 index eb9f219d..00000000 --- a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_DEFAULT_BOOT_STAGE2_FILE "${PICO_SDK_PATH}/src/rp2_common/boot_stage2/boot2_w25q080.S") diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 9995c23d..b2dbd3e6 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -26,6 +26,7 @@ */ #include "pico/stdlib.h" +#include "pico/binary_info.h" #include "hardware/gpio.h" #include "hardware/sync.h" #include "hardware/structs/ioqspi.h" @@ -110,10 +111,14 @@ void stdio_rtt_init(void) #endif +#ifdef UART_DEV +static uart_inst_t *uart_inst; +#endif void board_init(void) { #ifdef LED_PIN + bi_decl(bi_1pin_with_name(LED_PIN, "LED")); gpio_init(LED_PIN); gpio_set_dir(LED_PIN, GPIO_OUT); #endif @@ -123,7 +128,9 @@ void board_init(void) #endif #ifdef UART_DEV - stdio_uart_init_full(UART_DEV, CFG_BOARD_UART_BAUDRATE, UART_TX_PIN, UART_RX_PIN); + bi_decl(bi_2pins_with_func(UART_TX_PIN, UART_TX_PIN, GPIO_FUNC_UART)); + uart_inst = uart_get_instance(UART_DEV); + stdio_uart_init_full(uart_inst, CFG_BOARD_UART_BAUDRATE, UART_TX_PIN, UART_RX_PIN); #endif #if defined(LOGGER_RTT) @@ -164,7 +171,7 @@ int board_uart_read(uint8_t* buf, int len) { #ifdef UART_DEV for(int i=0;i