diff --git a/demos/device/device_os_none/.cproject b/demos/device/device_os_none/.cproject
index f38185d3..3d7aa8e6 100644
--- a/demos/device/device_os_none/.cproject
+++ b/demos/device/device_os_none/.cproject
@@ -30,7 +30,7 @@
-
+
-
+
@@ -63,7 +63,7 @@
-
+
@@ -121,7 +121,7 @@
-
+
-
+
@@ -155,7 +155,7 @@
-
+
@@ -212,7 +212,7 @@
-
+
-
+
@@ -248,7 +248,7 @@
-
+
@@ -307,7 +307,7 @@
-
+
-
+
@@ -340,7 +340,7 @@
-
+
@@ -398,7 +398,7 @@
-
+
-
+
@@ -434,7 +434,7 @@
-
+
@@ -493,7 +493,7 @@
-
+
-
+
@@ -529,7 +529,7 @@
-
+
@@ -568,45 +568,49 @@
<?xml version="1.0" encoding="UTF-8"?>
<TargetConfig>
-<Properties property_0="" property_3="NXP" property_4="LPC11U37/401" property_count="5" version="1"/>
-<infoList vendor="NXP"><info chip="LPC11U37/401" match_id="0x00017C40" name="LPC11U37/401" stub="crt_emu_lpc11_13_nxp"><chip><name>LPC11U37/401</name>
-<family>LPC11Uxx</family>
+<Properties property_0="" property_3="NXP" property_4="LPC1347" property_count="5" version="1"/>
+<infoList vendor="NXP"><info chip="LPC1347" match_id="0x08020543" name="LPC1347" stub="crt_emu_lpc11_13_nxp"><chip><name>LPC1347</name>
+<family>LPC13xx (12bit ADC)</family>
<vendor>NXP (formerly Philips)</vendor>
<reset board="None" core="Real" sys="Real"/>
<clock changeable="TRUE" freq="12MHz" is_accurate="TRUE"/>
<memory can_program="true" id="Flash" is_ro="true" type="Flash"/>
<memory id="RAM" type="RAM"/>
<memory id="Periph" is_volatile="true" type="Peripheral"/>
-<memoryInstance derived_from="Flash" id="MFlash128" location="0x0" size="0x20000"/>
+<memoryInstance derived_from="Flash" id="MFlash64" location="0x0" size="0x10000"/>
<memoryInstance derived_from="RAM" id="RamLoc8" location="0x10000000" size="0x2000"/>
<memoryInstance derived_from="RAM" id="RamUsb2" location="0x20004000" size="0x800"/>
-<prog_flash blocksz="0x1000" location="0x0" maxprgbuff="0x400" progwithcode="TRUE" size="0x20000"/>
-<peripheralInstance derived_from="CM0_NVIC" id="NVIC" location="0xe000e000"/>
-<peripheralInstance derived_from="LPC11U_GPIO" id="GPIO" location="0x50000000"/>
-<peripheralInstance derived_from="LPC11U_USBDEV" id="USB" location="0x40080000"/>
-<peripheralInstance derived_from="CM0_DCR" id="DCR" location="0xe000edf0"/>
-<peripheralInstance derived_from="LPC11U_GPIO_GROUP_INT" id="GPIOGROUP0INT" location="0x40060000"/>
-<peripheralInstance derived_from="LPC11U_GPIO_GROUP_INT" id="GPIOGROUP1INT" location="0x4005c000"/>
-<peripheralInstance derived_from="LPC11U_GPIO_INT" id="GPIOINT" location="0x4004c000"/>
-<peripheralInstance derived_from="LPC11_13_SSP" id="SSP1" location="0x40058000"/>
-<peripheralInstance derived_from="LPC11U_FMC" id="FMC" location="0x4003c000"/>
-<peripheralInstance derived_from="LPC11U_SYSCTL" id="SYSCTL" location="0x40048000"/>
-<peripheralInstance derived_from="LPC11U_IOCON" id="IOCON" location="0x40044000"/>
-<peripheralInstance derived_from="LPC11_13_SSP" id="SSP0" location="0x40040000"/>
-<peripheralInstance derived_from="LPC11_13_PMU" id="PMU" location="0x40038000"/>
-<peripheralInstance derived_from="LPC11_13_ADC" id="ADC" location="0x4001c000"/>
-<peripheralInstance derived_from="LPC11_13_TIMER32" id="TIMER1" location="0x40018000"/>
-<peripheralInstance derived_from="LPC11_13_TIMER32" id="TIMER0" location="0x40014000"/>
-<peripheralInstance derived_from="LPC11_13_TIMER16" id="TMR161" location="0x40010000"/>
-<peripheralInstance derived_from="LPC11_13_TIMER16" id="TMR160" location="0x4000c000"/>
-<peripheralInstance derived_from="LPC1xxx_UART_MODEM" id="UART0" location="0x40008000"/>
-<peripheralInstance derived_from="LPC11_13_WDT" id="WDT" location="0x40004000"/>
-<peripheralInstance derived_from="LPC11_13_I2C" id="I2C0" location="0x40000000"/>
+<memoryInstance derived_from="RAM" id="RamPeriph2" location="0x20000000" size="0x800"/>
+<prog_flash blocksz="0x1000" location="0x0" maxprgbuff="0x400" progwithcode="TRUE" size="0x10000"/>
+<peripheralInstance derived_from="V7M_MPU" id="MPU" location="0xe000ed90"/>
+<peripheralInstance derived_from="V7M_NVIC" id="NVIC" location="0xe000e000"/>
+<peripheralInstance derived_from="V7M_DCR" id="DCR" location="0xe000edf0"/>
+<peripheralInstance derived_from="V7M_ITM" id="ITM" location="0xe0000000"/>
+<peripheralInstance derived_from="I2C" id="I2C" location="0x40000000"/>
+<peripheralInstance derived_from="WWDT" id="WWDT" location="0x40004000"/>
+<peripheralInstance derived_from="USART" id="USART" location="0x40008000"/>
+<peripheralInstance derived_from="CT16B0" id="CT16B0" location="0x4000c000"/>
+<peripheralInstance derived_from="CT16B1" id="CT16B1" location="0x40010000"/>
+<peripheralInstance derived_from="CT32B0" id="CT32B0" location="0x40014000"/>
+<peripheralInstance derived_from="CT32B1" id="CT32B1" location="0x40018000"/>
+<peripheralInstance derived_from="ADC" id="ADC" location="0x4001c000"/>
+<peripheralInstance derived_from="PMU" id="PMU" location="0x40038000"/>
+<peripheralInstance derived_from="FLASHCTRL" id="FLASHCTRL" location="0x4003c000"/>
+<peripheralInstance derived_from="SSP0" id="SSP0" location="0x40040000"/>
+<peripheralInstance derived_from="IOCON" id="IOCON" location="0x40044000"/>
+<peripheralInstance derived_from="SYSCON" id="SYSCON" location="0x40048000"/>
+<peripheralInstance derived_from="GPIO-PIN-INT" id="GPIO-PIN-INT" location="0x4004c000"/>
+<peripheralInstance derived_from="SSP1" id="SSP1" location="0x40058000"/>
+<peripheralInstance derived_from="GPIO-GROUP-INT0" id="GPIO-GROUP-INT0" location="0x4005c000"/>
+<peripheralInstance derived_from="GPIO-GROUP-INT1" id="GPIO-GROUP-INT1" location="0x40060000"/>
+<peripheralInstance derived_from="RITIMER" id="RITIMER" location="0x40064000"/>
+<peripheralInstance derived_from="USB" id="USB" location="0x40080000"/>
+<peripheralInstance derived_from="GPIO-PORT" id="GPIO-PORT" location="0x50000000"/>
</chip>
-<processor><name gcc_name="cortex-m0">Cortex-M0</name>
+<processor><name gcc_name="cortex-m3">Cortex-M3</name>
<family>Cortex-M</family>
</processor>
-<link href="nxp_lpc11_13_peripheral.xme" show="embed" type="simple"/>
+<link href="nxp_lpc13Uxx_peripheral.xme" show="embed" type="simple"/>
</info>
</infoList>
</TargetConfig>
diff --git a/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/history.txt b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/history.txt
new file mode 100644
index 00000000..f564aade
--- /dev/null
+++ b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/history.txt
@@ -0,0 +1,25 @@
+History of updates to CMSIS_CORE_LPC13Uxx
+===========================================
+
+18 July 2013
+------------
+CMSIS library project using ARM Cortex-M0 CMSIS files as
+supplied in ARM's CMSIS 3.20 March 2013 release, together
+with NXP's device specific files taken from old
+CMSISv2p10_LPC13Uxx project.
+
+Note files are built -Os for both Debug and Release
+
+
+History of updates to CMSISv2p10_LPC13Uxx
+=========================================
+
+17 February 2012
+----------------
+
+CMSIS 2.1 library project using ARM Cortex-M3 CMSIS
+files as supplied in ARM's CMSIS 2.1 July 2011 release,
+together with device/board specific files from NXP for
+LPC1300 (12bit ADC) parts (ie LPC1315/16/17/45/46/47).
+
+
diff --git a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/LPC13Uxx.h b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/LPC13Uxx.h
similarity index 98%
rename from mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/LPC13Uxx.h
rename to mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/LPC13Uxx.h
index 96603354..220c0f88 100644
--- a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/LPC13Uxx.h
+++ b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/LPC13Uxx.h
@@ -1,760 +1,760 @@
-
-/****************************************************************************************************//**
- * @file LPC13Uxx.h
- *
- *
- *
- * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File for
- * default LPC13Uxx Device Series
- *
- * @version V0.1
- * @date 18. Jan 2012
- *
- * @note Generated with SFDGen V2.6 Build 4f on Tuesday, 17.01.2012 13:39:52
- *
- * from CMSIS SVD File 'LPC13uxx_svd_v0.1.xml' Version 0.1,
- * created on Thurs, 01.19.2012 15:13:15, last modified on Thurs, 01.19.2012 15:53:09
- *
- *******************************************************************************************************/
-
-/** @addtogroup NXP
- * @{
- */
-
-/** @addtogroup LPC13Uxx
- * @{
- */
-
-#ifndef __LPC13UXX_H__
-#define __LPC13UXX_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-#if defined ( __CC_ARM )
- #pragma anon_unions
-#endif
-
- /* Interrupt Number Definition */
-
-typedef enum {
-// ------------------------- Cortex-M3 Processor Exceptions Numbers -----------------------------
- Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
- NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
- HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
- MemoryManagement_IRQn = -12, /*!< 4 Memory Management, MPU mismatch, including Access Violation and No Match */
- BusFault_IRQn = -11, /*!< 5 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory related Fault */
- UsageFault_IRQn = -10, /*!< 6 Usage Fault, i.e. Undef Instruction, Illegal State Transition */
- SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
- DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
- PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
- SysTick_IRQn = -1, /*!< 15 System Tick Timer */
-// ---------------------------- LPC13Uxx Specific Interrupt Numbers --------------------------------
- PIN_INT0_IRQn = 0, /*!< 0 PIN_INT0 */
- PIN_INT1_IRQn = 1, /*!< 1 PIN_INT1 */
- PIN_INT2_IRQn = 2, /*!< 2 PIN_INT2 */
- PIN_INT3_IRQn = 3, /*!< 3 PIN_INT3 */
- PIN_INT4_IRQn = 4, /*!< 4 PIN_INT4 */
- PIN_INT5_IRQn = 5, /*!< 5 PIN_INT5 */
- PIN_INT6_IRQn = 6, /*!< 6 PIN_INT6 */
- PIN_INT7_IRQn = 7, /*!< 7 PIN_INT7 */
- GINT0_IRQn = 8, /*!< 8 GINT0 */
- GINT1_IRQn = 9, /*!< 9 GINT1 */
- Reserved0_IRQn = 10, /*!< 10 Reserved Interrupt */
- Reserved1_IRQn = 11, /*!< 11 Reserved Interrupt */
- RIT_IRQn = 12, /*!< 12 Repetitive Interrupt Timer */
- Reserved2_IRQn = 13, /*!< 13 Reserved Interrupt */
- SSP1_IRQn = 14, /*!< 14 SSP1 */
- I2C_IRQn = 15, /*!< 15 I2C */
- CT16B0_IRQn = 16, /*!< 16 CT16B0 */
- CT16B1_IRQn = 17, /*!< 17 CT16B1 */
- CT32B0_IRQn = 18, /*!< 18 CT32B0 */
- CT32B1_IRQn = 19, /*!< 19 CT32B1 */
- SSP0_IRQn = 20, /*!< 20 SSP0 */
- USART_IRQn = 21, /*!< 21 USART */
- USB_IRQ_IRQn = 22, /*!< 22 USB_IRQ */
- USB_FIQ_IRQn = 23, /*!< 23 USB_FIQ */
- ADC_IRQn = 24, /*!< 24 ADC */
- WDT_IRQn = 25, /*!< 25 WDT */
- BOD_IRQn = 26, /*!< 26 BOD */
- FMC_IRQn = 27, /*!< 27 FMC */
- Reserved3_IRQn = 28, /*!< 28 Reserved Interrupt */
- Reserved4_IRQn = 29, /*!< 29 Reserved Interrupt */
- USBWAKEUP_IRQn = 30, /*!< 30 USBWAKEUP */
- Reserved5_IRQn = 31, /*!< 31 Reserved Interrupt */
-} IRQn_Type;
-
-
-/** @addtogroup Configuration_of_CMSIS
- * @{
- */
-
-/* Processor and Core Peripheral Section */ /* Configuration of the Cortex-M3 Processor and Core Peripherals */
-
-#define __CM3_REV 0x0000 /*!< Cortex-M3 Core Revision */
-#define __MPU_PRESENT 0 /*!< MPU present or not */
-#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-/** @} */ /* End of group Configuration_of_CMSIS */
-
-#include /*!< Cortex-M3 processor and core peripherals */
-#include "system_LPC13Uxx.h" /*!< LPC13Uxx System */
-
-/** @addtogroup Device_Peripheral_Registers
- * @{
- */
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- I2C -----
-// ------------------------------------------------------------------------------------------------
-
-
-
-typedef struct { /*!< (@ 0x40000000) I2C Structure */
- __IO uint32_t CONSET; /*!< (@ 0x40000000) I2C Control Set Register. When a one is written to a bit of this register, the corresponding bit in the I2C control register is set. Writing a zero has no effect on the corresponding bit in the I2C control register. */
- __I uint32_t STAT; /*!< (@ 0x40000004) I2C Status Register. During I2C operation, this register provides detailed status codes that allow software to determine the next action needed. */
- __IO uint32_t DAT; /*!< (@ 0x40000008) I2C Data Register. During master or slave transmit mode, data to be transmitted is written to this register. During master or slave receive mode, data that has been received may be read from this register. */
- __IO uint32_t ADR0; /*!< (@ 0x4000000C) I2C Slave Address Register 0. Contains the 7-bit slave address for operation of the I2C interface in slave mode, and is not used in master mode. The least significant bit determines whether a slave responds to the General Call address. */
- __IO uint32_t SCLH; /*!< (@ 0x40000010) SCH Duty Cycle Register High Half Word. Determines the high time of the I2C clock. */
- __IO uint32_t SCLL; /*!< (@ 0x40000014) SCL Duty Cycle Register Low Half Word. Determines the low time of the I2C clock. I2nSCLL and I2nSCLH together determine the clock frequency generated by an I2C master and certain times used in slave mode. */
- __O uint32_t CONCLR; /*!< (@ 0x40000018) I2C Control Clear Register. When a one is written to a bit of this register, the corresponding bit in the I2C control register is cleared. Writing a zero has no effect on the corresponding bit in the I2C control register. */
- __IO uint32_t MMCTRL; /*!< (@ 0x4000001C) Monitor mode control register. */
- union{
- __IO uint32_t ADR[3]; /*!< (@ 0x40000020) I2C Slave Address Register. Contains the 7-bit slave address for operation of the I2C interface in slave mode, and is not used in master mode. The least significant bit determines whether a slave responds to the General Call address. */
- struct{
- __IO uint32_t ADR1;
- __IO uint32_t ADR2;
- __IO uint32_t ADR3;
- };
- };
- __I uint32_t DATA_BUFFER; /*!< (@ 0x4000002C) Data buffer register. The contents of the 8 MSBs of the I2DAT shift register will be transferred to the DATA_BUFFER automatically after every nine bits (8 bits of data plus ACK or NACK) has been received on the bus. */
- union{
- __IO uint32_t MASK[4]; /*!< (@ 0x40000030) I2C Slave address mask register. This mask register is associated with I2ADR0 to determine an address match. The mask register has no effect when comparing to the General Call address (0000000). */
- struct{
- __IO uint32_t MASK0;
- __IO uint32_t MASK1;
- __IO uint32_t MASK2;
- __IO uint32_t MASK3;
- };
- };
-} LPC_I2C_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- WWDT -----
-// ------------------------------------------------------------------------------------------------
-
-
-typedef struct { /*!< (@ 0x40004000) WWDT Structure */
- __IO uint32_t MOD; /*!< (@ 0x40004000) Watchdog mode register. This register contains the basic mode and status of the Watchdog Timer. */
- __IO uint32_t TC; /*!< (@ 0x40004004) Watchdog timer constant register. This 24-bit register determines the time-out value. */
- __O uint32_t FEED; /*!< (@ 0x40004008) Watchdog feed sequence register. Writing 0xAA followed by 0x55 to this register reloads the Watchdog timer with the value contained in WDTC. */
- __I uint32_t TV; /*!< (@ 0x4000400C) Watchdog timer value register. This 24-bit register reads out the current value of the Watchdog timer. */
- __IO uint32_t CLKSEL; /*!< (@ 0x40004010) Watchdog clock select register. */
- __IO uint32_t WARNINT; /*!< (@ 0x40004014) Watchdog Warning Interrupt compare value. */
- __IO uint32_t WINDOW; /*!< (@ 0x40004018) Watchdog Window compare value. */
-} LPC_WWDT_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- USART -----
-// ------------------------------------------------------------------------------------------------
-
-
-typedef struct { /*!< (@ 0x40008000) USART Structure */
-
- union {
- __IO uint32_t DLL; /*!< (@ 0x40008000) Divisor Latch LSB. Least significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
- __O uint32_t THR; /*!< (@ 0x40008000) Transmit Holding Register. The next character to be transmitted is written here. (DLAB=0) */
- __I uint32_t RBR; /*!< (@ 0x40008000) Receiver Buffer Register. Contains the next received character to be read. (DLAB=0) */
- };
-
- union {
- __IO uint32_t IER; /*!< (@ 0x40008004) Interrupt Enable Register. Contains individual interrupt enable bits for the 7 potential USART interrupts. (DLAB=0) */
- __IO uint32_t DLM; /*!< (@ 0x40008004) Divisor Latch MSB. Most significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
- };
-
- union {
- __O uint32_t FCR; /*!< (@ 0x40008008) FIFO Control Register. Controls USART FIFO usage and modes. */
- __I uint32_t IIR; /*!< (@ 0x40008008) Interrupt ID Register. Identifies which interrupt(s) are pending. */
- };
- __IO uint32_t LCR; /*!< (@ 0x4000800C) Line Control Register. Contains controls for frame formatting and break generation. */
- __IO uint32_t MCR; /*!< (@ 0x40008010) Modem Control Register. */
- __I uint32_t LSR; /*!< (@ 0x40008014) Line Status Register. Contains flags for transmit and receive status, including line errors. */
- __I uint32_t MSR; /*!< (@ 0x40008018) Modem Status Register. */
- __IO uint32_t SCR; /*!< (@ 0x4000801C) Scratch Pad Register. Eight-bit temporary storage for software. */
- __IO uint32_t ACR; /*!< (@ 0x40008020) Auto-baud Control Register. Contains controls for the auto-baud feature. */
- __IO uint32_t ICR; /*!< (@ 0x40008024) IrDA Control Register. Enables and configures the IrDA (remote control) mode. */
- __IO uint32_t FDR; /*!< (@ 0x40008028) Fractional Divider Register. Generates a clock input for the baud rate divider. */
- __IO uint32_t OSR; /*!< (@ 0x4000802C) Oversampling Register. Controls the degree of oversampling during each bit time. */
- __IO uint32_t TER; /*!< (@ 0x40008030) Transmit Enable Register. Turns off USART transmitter for use with software flow control. */
- __I uint32_t RESERVED0[3];
- __IO uint32_t HDEN; /*!< (@ 0x40008040) Half duplex enable register. */
- __I uint32_t RESERVED1;
- __IO uint32_t SCICTRL; /*!< (@ 0x40008048) Smart Card Interface Control register. Enables and configures the Smart Card Interface feature. */
- __IO uint32_t RS485CTRL; /*!< (@ 0x4000804C) RS-485/EIA-485 Control. Contains controls to configure various aspects of RS-485/EIA-485 modes. */
- __IO uint32_t RS485ADRMATCH; /*!< (@ 0x40008050) RS-485/EIA-485 address match. Contains the address match value for RS-485/EIA-485 mode. */
- __IO uint32_t RS485DLY; /*!< (@ 0x40008054) RS-485/EIA-485 direction control delay. */
- __IO uint32_t SYNCCTRL; /*!< (@ 0x40008058) Synchronous mode control register. */
-} LPC_USART_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- CT16B0 -----
-// ------------------------------------------------------------------------------------------------
-
-typedef struct { /*!< (@ 0x4000C000) CT16B0 Structure */
- __IO uint32_t IR; /*!< (@ 0x4000C000) Interrupt Register. The IR can be written to clear interrupts. The IR can be read to identify which of eight possible interrupt sources are pending. */
- __IO uint32_t TCR; /*!< (@ 0x4000C004) Timer Control Register. The TCR is used to control the Timer Counter functions. The Timer Counter can be disabled or reset through the TCR. */
- __IO uint32_t TC; /*!< (@ 0x4000C008) Timer Counter. The 16-bit TC is incremented every PR+1 cycles of PCLK. The TC is controlled through the TCR. */
- __IO uint32_t PR; /*!< (@ 0x4000C00C) Prescale Register. When the Prescale Counter (below) is equal to this value, the next clock increments the TC and clears the PC. */
- __IO uint32_t PC; /*!< (@ 0x4000C010) Prescale Counter. The 16-bit PC is a counter which is incremented to the value stored in PR. When the value in PR is reached, the TC is incremented and the PC is cleared. The PC is observable and controllable through the bus interface. */
- __IO uint32_t MCR; /*!< (@ 0x4000C014) Match Control Register. The MCR is used to control if an interrupt is generated and if the TC is reset when a Match occurs. */
- union {
- __IO uint32_t MR[4]; /*!< (@ 0x4000C018) Match Register. MR can be enabled through the MCR to reset the TC, stop both the TC and PC, and/or generate an interrupt every time MR matches the TC. */
- struct{
- __IO uint32_t MR0; /*!< (@ 0x4000C018) Match Register. MR0 */
- __IO uint32_t MR1; /*!< (@ 0x4000C01C) Match Register. MR1 */
- __IO uint32_t MR2; /*!< (@ 0x4000C020) Match Register. MR2 */
- __IO uint32_t MR3; /*!< (@ 0x4000C024) Match Register. MR3 */
- };
- };
- __IO uint32_t CCR; /*!< (@ 0x4000C028) Capture Control Register. The CCR controls which edges of the capture inputs are used to load the Capture Registers and whether or not an interrupt is generated when a capture takes place. */
- union{
- __I uint32_t CR[4]; /*!< (@ 0x4000C02C) Capture Register. CR is loaded with the value of TC when there is an event on the CT16B0_CAP input. */
- struct{
- __I uint32_t CR0; /*!< (@ 0x4000C02C) Capture Register. CR 0 */
- __I uint32_t CR1; /*!< (@ 0x4000C030) Capture Register. CR 1 */
- __I uint32_t CR2; /*!< (@ 0x4000C034) Capture Register. CR 2 */
- __I uint32_t CR3; /*!< (@ 0x4000C038) Capture Register. CR 3 */
- };
- };
- __IO uint32_t EMR; /*!< (@ 0x4000C03C) External Match Register. The EMR controls the match function and the external match pins */
- __I uint32_t RESERVED0[12];
- __IO uint32_t CTCR; /*!< (@ 0x4000C070) Count Control Register. The CTCR selects between Timer and Counter mode, and in Counter mode selects the signal and edge(s) for counting. */
- __IO uint32_t PWMC; /*!< (@ 0x4000C074) PWM Control Register. The PWMCON enables PWM mode for the external match pins CT16B0_MAT[1:0] and CT16B1_MAT[1:0]. */
-} LPC_CT16B0_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- CT16B1 -----
-// ------------------------------------------------------------------------------------------------
-
-typedef struct { /*!< (@ 0x40010000) CT16B1 Structure */
- __IO uint32_t IR; /*!< (@ 0x40010000) Interrupt Register. The IR can be written to clear interrupts. The IR can be read to identify which of eight possible interrupt sources are pending. */
- __IO uint32_t TCR; /*!< (@ 0x40010004) Timer Control Register. The TCR is used to control the Timer Counter functions. The Timer Counter can be disabled or reset through the TCR. */
- __IO uint32_t TC; /*!< (@ 0x40010008) Timer Counter. The 16-bit TC is incremented every PR+1 cycles of PCLK. The TC is controlled through the TCR. */
- __IO uint32_t PR; /*!< (@ 0x4001000C) Prescale Register. When the Prescale Counter (below) is equal to this value, the next clock increments the TC and clears the PC. */
- __IO uint32_t PC; /*!< (@ 0x40010010) Prescale Counter. The 16-bit PC is a counter which is incremented to the value stored in PR. When the value in PR is reached, the TC is incremented and the PC is cleared. The PC is observable and controllable through the bus interface. */
- __IO uint32_t MCR; /*!< (@ 0x40010014) Match Control Register. The MCR is used to control if an interrupt is generated and if the TC is reset when a Match occurs. */
- union {
- __IO uint32_t MR[4]; /*!< (@ 0x40010018) Match Register. MR can be enabled through the MCR to reset the TC, stop both the TC and PC, and/or generate an interrupt every time MR matches the TC. */
- struct{
- __IO uint32_t MR0; /*!< (@ 0x40010018) Match Register. MR0 */
- __IO uint32_t MR1; /*!< (@ 0x4001001C) Match Register. MR1 */
- __IO uint32_t MR2; /*!< (@ 0x40010020) Match Register. MR2 */
- __IO uint32_t MR3; /*!< (@ 0x40010024) Match Register. MR3 */
- };
- };
- __IO uint32_t CCR; /*!< (@ 0x40010028) Capture Control Register. The CCR controls which edges of the capture inputs are used to load the Capture Registers and whether or not an interrupt is generated when a capture takes place. */
- union{
- __I uint32_t CR[4]; /*!< (@ 0x4001002C) Capture Register. CR is loaded with the value of TC when there is an event on the CT16B0_CAP input. */
- struct{
- __I uint32_t CR0; /*!< (@ 0x4001002C) Capture Register. CR 0 */
- __I uint32_t CR1; /*!< (@ 0x40010030) Capture Register. CR 1 */
- __I uint32_t CR2; /*!< (@ 0x40010034) Capture Register. CR 2 */
- __I uint32_t CR3; /*!< (@ 0x40010038) Capture Register. CR 3 */
- };
- };
- __IO uint32_t EMR; /*!< (@ 0x4001003C) External Match Register. The EMR controls the match function and the external match pins */
- __I uint32_t RESERVED0[12];
- __IO uint32_t CTCR; /*!< (@ 0x40010070) Count Control Register. The CTCR selects between Timer and Counter mode, and in Counter mode selects the signal and edge(s) for counting. */
- __IO uint32_t PWMC; /*!< (@ 0x40010074) PWM Control Register. The PWMCON enables PWM mode for the external match pins CT16B0_MAT[1:0] and CT16B1_MAT[1:0]. */
-} LPC_CT16B1_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- CT32B0 -----
-// ------------------------------------------------------------------------------------------------
-typedef struct { /*!< (@ 0x40014000) CT32B0 Structure */
- __IO uint32_t IR; /*!< (@ 0x40014000) Interrupt Register. The IR can be written to clear interrupts. The IR can be read to identify which of eight possible interrupt sources are pending. */
- __IO uint32_t TCR; /*!< (@ 0x40014004) Timer Control Register. The TCR is used to control the Timer Counter functions. The Timer Counter can be disabled or reset through the TCR. */
- __IO uint32_t TC; /*!< (@ 0x40014008) Timer Counter. The 32-bit TC is incremented every PR+1 cycles of PCLK. The TC is controlled through the TCR. */
- __IO uint32_t PR; /*!< (@ 0x4001400C) Prescale Register. When the Prescale Counter (below) is equal to this value, the next clock increments the TC and clears the PC. */
- __IO uint32_t PC; /*!< (@ 0x40014010) Prescale Counter. The 32-bit PC is a counter which is incremented to the value stored in PR. When the value in PR is reached, the TC is incremented and the PC is cleared. The PC is observable and controllable through the bus interface. */
- __IO uint32_t MCR; /*!< (@ 0x40014014) Match Control Register. The MCR is used to control if an interrupt is generated and if the TC is reset when a Match occurs. */
- union {
- __IO uint32_t MR[4]; /*!< (@ 0x40014018) Match Register. MR can be enabled through the MCR to reset the TC, stop both the TC and PC, and/or generate an interrupt every time MR matches the TC. */
- struct{
- __IO uint32_t MR0; /*!< (@ 0x40014018) Match Register. MR0 */
- __IO uint32_t MR1; /*!< (@ 0x4001401C) Match Register. MR1 */
- __IO uint32_t MR2; /*!< (@ 0x40014020) Match Register. MR2 */
- __IO uint32_t MR3; /*!< (@ 0x40014024) Match Register. MR3 */
- };
- };
- __IO uint32_t CCR; /*!< (@ 0x40014028) Capture Control Register. The CCR controls which edges of the capture inputs are used to load the Capture Registers and whether or not an interrupt is generated when a capture takes place. */
- union{
- __I uint32_t CR[4]; /*!< (@ 0x4001402C) Capture Register. CR is loaded with the value of TC when there is an event on the CT32B_CAP0 input. */
- struct{
- __I uint32_t CR0; /*!< (@ 0x4001402C) Capture Register. CR 0 */
- __I uint32_t CR1; /*!< (@ 0x40014030) Capture Register. CR 1 */
- __I uint32_t CR2; /*!< (@ 0x40014034) Capture Register. CR 2 */
- __I uint32_t CR3; /*!< (@ 0x40014038) Capture Register. CR 3 */
- };
- };
- __IO uint32_t EMR; /*!< (@ 0x4001403C) External Match Register. The EMR controls the match function and the external match pins CT32Bn_MAT[3:0]. */
- __I uint32_t RESERVED0[12];
- __IO uint32_t CTCR; /*!< (@ 0x40014070) Count Control Register. The CTCR selects between Timer and Counter mode, and in Counter mode selects the signal and edge(s) for counting. */
- __IO uint32_t PWMC; /*!< (@ 0x40014074) PWM Control Register. The PWMCON enables PWM mode for the external match pins CT32Bn_MAT[3:0]. */
-} LPC_CT32B0_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- CT32B1 -----
-// ------------------------------------------------------------------------------------------------
-typedef struct { /*!< (@ 0x40018000) CT32B1 Structure */
- __IO uint32_t IR; /*!< (@ 0x40018000) Interrupt Register. The IR can be written to clear interrupts. The IR can be read to identify which of eight possible interrupt sources are pending. */
- __IO uint32_t TCR; /*!< (@ 0x40018004) Timer Control Register. The TCR is used to control the Timer Counter functions. The Timer Counter can be disabled or reset through the TCR. */
- __IO uint32_t TC; /*!< (@ 0x40018008) Timer Counter. The 32-bit TC is incremented every PR+1 cycles of PCLK. The TC is controlled through the TCR. */
- __IO uint32_t PR; /*!< (@ 0x4001800C) Prescale Register. When the Prescale Counter (below) is equal to this value, the next clock increments the TC and clears the PC. */
- __IO uint32_t PC; /*!< (@ 0x40018010) Prescale Counter. The 32-bit PC is a counter which is incremented to the value stored in PR. When the value in PR is reached, the TC is incremented and the PC is cleared. The PC is observable and controllable through the bus interface. */
- __IO uint32_t MCR; /*!< (@ 0x40018014) Match Control Register. The MCR is used to control if an interrupt is generated and if the TC is reset when a Match occurs. */
- union {
- __IO uint32_t MR[4]; /*!< (@ 0x40018018) Match Register. MR can be enabled through the MCR to reset the TC, stop both the TC and PC, and/or generate an interrupt every time MR matches the TC. */
- struct{
- __IO uint32_t MR0; /*!< (@ 0x40018018) Match Register. MR0 */
- __IO uint32_t MR1; /*!< (@ 0x4001801C) Match Register. MR1 */
- __IO uint32_t MR2; /*!< (@ 0x40018020) Match Register. MR2 */
- __IO uint32_t MR3; /*!< (@ 0x40018024) Match Register. MR3 */
- };
- };
- __IO uint32_t CCR; /*!< (@ 0x40018028) Capture Control Register. The CCR controls which edges of the capture inputs are used to load the Capture Registers and whether or not an interrupt is generated when a capture takes place. */
- union{
- __I uint32_t CR[4]; /*!< (@ 0x4001802C) Capture Register. CR is loaded with the value of TC when there is an event on the CT32B_CAP0 input. */
- struct{
- __I uint32_t CR0; /*!< (@ 0x4001802C) Capture Register. CR 0 */
- __I uint32_t CR1; /*!< (@ 0x40018030) Capture Register. CR 1 */
- __I uint32_t CR2; /*!< (@ 0x40018034) Capture Register. CR 2 */
- __I uint32_t CR3; /*!< (@ 0x40018038) Capture Register. CR 3 */
- };
- };
- __IO uint32_t EMR; /*!< (@ 0x4001803C) External Match Register. The EMR controls the match function and the external match pins CT32Bn_MAT[3:0]. */
- __I uint32_t RESERVED0[12];
- __IO uint32_t CTCR; /*!< (@ 0x40018070) Count Control Register. The CTCR selects between Timer and Counter mode, and in Counter mode selects the signal and edge(s) for counting. */
- __IO uint32_t PWMC; /*!< (@ 0x40018074) PWM Control Register. The PWMCON enables PWM mode for the external match pins CT32Bn_MAT[3:0]. */
-} LPC_CT32B1_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- ADC -----
-// ------------------------------------------------------------------------------------------------
-typedef struct { /*!< (@ 0x4001C000) ADC Structure */
- __IO uint32_t CR; /*!< (@ 0x4001C000) A/D Control Register. The CR register must be written to select the operating mode before A/D conversion can occur. */
- __IO uint32_t GDR; /*!< (@ 0x4001C004) A/D Global Data Register. Contains the result of the most recent A/D conversion. */
- __I uint32_t RESERVED0[1];
- __IO uint32_t INTEN; /*!< (@ 0x4001C00C) A/D Interrupt Enable Register. This register contains enable bits that allow the DONE flag of each A/D channel to be included or excluded from contributing to the generation of an A/D interrupt. */
- union{
- __I uint32_t DR[8]; /*!< (@ 0x4001C010) A/D Channel Data Register*/
- struct{
- __I uint32_t DR0; /*!< (@ 0x4001C010) A/D Channel Data Register 0*/
- __I uint32_t DR1; /*!< (@ 0x4001C014) A/D Channel Data Register 1*/
- __I uint32_t DR2; /*!< (@ 0x4001C018) A/D Channel Data Register 2*/
- __I uint32_t DR3; /*!< (@ 0x4001C01C) A/D Channel Data Register 3*/
- __I uint32_t DR4; /*!< (@ 0x4001C020) A/D Channel Data Register 4*/
- __I uint32_t DR5; /*!< (@ 0x4001C024) A/D Channel Data Register 5*/
- __I uint32_t DR6; /*!< (@ 0x4001C028) A/D Channel Data Register 6*/
- __I uint32_t DR7; /*!< (@ 0x4001C02C) A/D Channel Data Register 7*/
- };
- };
- __I uint32_t STAT; /*!< (@ 0x4001C030) A/D Status Register. This register contains DONE and OVERRUN flags for all of the A/D channels, as well as the A/D interrupt flag. */
-} LPC_ADC_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- PMU -----
-// ------------------------------------------------------------------------------------------------
-
-typedef struct { /*!< (@ 0x40038000) PMU Structure */
- __IO uint32_t PCON; /*!< (@ 0x40038000) Power control register */
- union{
- __IO uint32_t GPREG[4]; /*!< (@ 0x40038004) General purpose register 0 */
- struct{
- __IO uint32_t GPREG0; /*!< (@ 0x40038004) General purpose register 0 */
- __IO uint32_t GPREG1; /*!< (@ 0x40038008) General purpose register 1 */
- __IO uint32_t GPREG2; /*!< (@ 0x4003800C) General purpose register 2 */
- __IO uint32_t GPREG3; /*!< (@ 0x40038010) General purpose register 3 */
- };
- };
- __IO uint32_t GPREG4; /*!< (@ 0x40038014) General purpose register 4 */
-} LPC_PMU_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- FLASHCTRL -----
-// ------------------------------------------------------------------------------------------------
-
-typedef struct { /*!< (@ 0x4003C000) FLASHCTRL Structure */
- __I uint32_t RESERVED0[4];
- __IO uint32_t FLASHCFG; /*!< (@ 0x4003C010) Flash memory access time configuration register */
- __I uint32_t RESERVED1[3];
- __IO uint32_t FMSSTART; /*!< (@ 0x4003C020) Signature start address register */
- __IO uint32_t FMSSTOP; /*!< (@ 0x4003C024) Signature stop-address register */
- __I uint32_t RESERVED2[1];
- __I uint32_t FMSW0; /*!< (@ 0x4003C02C) Word 0 [31:0] */
- __I uint32_t FMSW1; /*!< (@ 0x4003C030) Word 1 [63:32] */
- __I uint32_t FMSW2; /*!< (@ 0x4003C034) Word 2 [95:64] */
- __I uint32_t FMSW3; /*!< (@ 0x4003C038) Word 3 [127:96] */
- __I uint32_t RESERVED3[1001];
- __I uint32_t FMSTAT; /*!< (@ 0x4003CFE0) Signature generation status register */
- __I uint32_t RESERVED4[1];
- __O uint32_t FMSTATCLR; /*!< (@ 0x4003CFE8) Signature generation status clear register */
-} LPC_FLASHCTRL_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- SSP0 -----
-// ------------------------------------------------------------------------------------------------
-typedef struct { /*!< (@ 0x40040000) SSP0 Structure */
- __IO uint32_t CR0; /*!< (@ 0x40040000) Control Register 0. Selects the serial clock rate, bus type, and data size. */
- __IO uint32_t CR1; /*!< (@ 0x40040004) Control Register 1. Selects master/slave and other modes. */
- __IO uint32_t DR; /*!< (@ 0x40040008) Data Register. Writes fill the transmit FIFO, and reads empty the receive FIFO. */
- __I uint32_t SR; /*!< (@ 0x4004000C) Status Register */
- __IO uint32_t CPSR; /*!< (@ 0x40040010) Clock Prescale Register */
- __IO uint32_t IMSC; /*!< (@ 0x40040014) Interrupt Mask Set and Clear Register */
- __I uint32_t RIS; /*!< (@ 0x40040018) Raw Interrupt Status Register */
- __I uint32_t MIS; /*!< (@ 0x4004001C) Masked Interrupt Status Register */
- __O uint32_t ICR; /*!< (@ 0x40040020) SSPICR Interrupt Clear Register */
-} LPC_SSP0_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- IOCON -----
-// ------------------------------------------------------------------------------------------------
-typedef struct { /*!< (@ 0x40044000) IOCON Structure */
- __IO uint32_t RESET_PIO0_0; /*!< (@ 0x40044000) I/O configuration for pin RESET/PIO0_0 */
- __IO uint32_t PIO0_1; /*!< (@ 0x40044004) I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2/USB_FTOGGLE */
- __IO uint32_t PIO0_2; /*!< (@ 0x40044008) I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 */
- __IO uint32_t PIO0_3; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_3/USB_VBUS */
- __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4/SCL */
- __IO uint32_t PIO0_5; /*!< (@ 0x40044014) I/O configuration for pin PIO0_5/SDA */
- __IO uint32_t PIO0_6; /*!< (@ 0x40044018) I/O configuration for pin PIO0_6/USB_CONNECT/SCK0 */
- __IO uint32_t PIO0_7; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_7/CTS */
- __IO uint32_t PIO0_8; /*!< (@ 0x40044020) I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0/SWO */
- __IO uint32_t PIO0_9; /*!< (@ 0x40044024) I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1/TRACECLK */
- __IO uint32_t SWCLK_PIO0_10; /*!< (@ 0x40044028) I/O configuration for pin SWCLK/PIO0_10/ SCK0/CT16B0_MAT2 */
- __IO uint32_t TDI_PIO0_11; /*!< (@ 0x4004402C) I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 */
- __IO uint32_t TMS_PIO0_12; /*!< (@ 0x40044030) I/O configuration for pin TMS/PIO0_12/AD1/CT32B1_CAP0 */
- __IO uint32_t TDO_PIO0_13; /*!< (@ 0x40044034) I/O configuration for pin TDO/PIO0_13/AD2/CT32B1_MAT0 */
- __IO uint32_t TRST_PIO0_14; /*!< (@ 0x40044038) I/O configuration for pin TRST/PIO0_14/AD3/CT32B1_MAT1 */
- __IO uint32_t SWDIO_PIO0_15; /*!< (@ 0x4004403C) I/O configuration for pin SWDIO/PIO0_15/AD4/CT32B1_MAT2 */
- __IO uint32_t PIO0_16; /*!< (@ 0x40044040) I/O configuration for pin PIO0_16/AD5/CT32B1_MAT3/ WAKEUP */
- __IO uint32_t PIO0_17; /*!< (@ 0x40044044) I/O configuration for pin PIO0_17/RTS/CT32B0_CAP0/SCLK */
- __IO uint32_t PIO0_18; /*!< (@ 0x40044048) I/O configuration for pin PIO0_18/RXD/CT32B0_MAT0 */
- __IO uint32_t PIO0_19; /*!< (@ 0x4004404C) I/O configuration for pin PIO0_19/TXD/CT32B0_MAT1 */
- __IO uint32_t PIO0_20; /*!< (@ 0x40044050) I/O configuration for pin PIO0_20/CT16B1_CAP0 */
- __IO uint32_t PIO0_21; /*!< (@ 0x40044054) I/O configuration for pin PIO0_21/CT16B1_MAT0/MOSI1 */
- __IO uint32_t PIO0_22; /*!< (@ 0x40044058) I/O configuration for pin PIO0_22/AD6/CT16B1_MAT1/MISO1 */
- __IO uint32_t PIO0_23; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_23/AD7 */
- __IO uint32_t PIO1_0; /*!< (@ 0x40044060) I/O configuration for pin PIO1_0/CT32B1_MAT0 */
- __IO uint32_t PIO1_1; /*!< (@ 0x40044064) I/O configuration for pin PIO1_1/CT32B1_MAT1 */
- __IO uint32_t PIO1_2; /*!< (@ 0x40044068) I/O configuration for pin PIO1_2/CT32B1_MAT2 */
- __IO uint32_t PIO1_3; /*!< (@ 0x4004406C) I/O configuration for pin PIO1_3/CT32B1_MAT3 */
- __IO uint32_t PIO1_4; /*!< (@ 0x40044070) I/O configuration for pin PIO1_4/CT32B1_CAP0 */
- __IO uint32_t PIO1_5; /*!< (@ 0x40044074) I/O configuration for pin PIO1_5/CT32B1_CAP1 */
- __IO uint32_t PIO1_6; /*!< (@ 0x40044078) I/O configuration for pin PIO1_6 */
- __IO uint32_t PIO1_7; /*!< (@ 0x4004407C) I/O configuration for pin PIO1_7 */
- __IO uint32_t PIO1_8; /*!< (@ 0x40044080) I/O configuration for pin PIO1_8 */
- __IO uint32_t PIO1_9; /*!< (@ 0x40044084) I/O configuration for pin PIO1_9 */
- __IO uint32_t PIO1_10; /*!< (@ 0x40044088) I/O configuration for pin PIO1_10 */
- __IO uint32_t PIO1_11; /*!< (@ 0x4004408C) I/O configuration for pin PIO1_11 */
- __IO uint32_t PIO1_12; /*!< (@ 0x40044090) I/O configuration for pin PIO1_12 */
- __IO uint32_t PIO1_13; /*!< (@ 0x40044094) I/O configuration for PIO1_13/DTR/CT16B0_MAT0/TXD */
- __IO uint32_t PIO1_14; /*!< (@ 0x40044098) I/O configuration for PIO1_14/DSR/CT16B0_MAT1/RXD */
- __IO uint32_t PIO1_15; /*!< (@ 0x4004409C) I/O configuration for pin PIO1_15/DCD/ CT16B0_MAT2/SCK1 */
- __IO uint32_t PIO1_16; /*!< (@ 0x400440A0) I/O configuration for pin PIO1_16/RI/CT16B0_CAP0 */
- __IO uint32_t PIO1_17; /*!< (@ 0x400440A4) I/O configuration for PIO1_17/CT16B0_CAP1/RXD */
- __IO uint32_t PIO1_18; /*!< (@ 0x400440A8) I/O configuration for PIO1_18/CT16B1_CAP1/TXD */
- __IO uint32_t PIO1_19; /*!< (@ 0x400440AC) I/O configuration for pin PIO1_19/DTR/SSEL1 */
- __IO uint32_t PIO1_20; /*!< (@ 0x400440B0) I/O configuration for pin PIO1_20/DSR/SCK1 */
- __IO uint32_t PIO1_21; /*!< (@ 0x400440B4) I/O configuration for pin PIO1_21/DCD/MISO1 */
- __IO uint32_t PIO1_22; /*!< (@ 0x400440B8) I/O configuration for pin PIO1_22/RI/MOSI1 */
- __IO uint32_t PIO1_23; /*!< (@ 0x400440BC) I/O configuration for pin PIO1_23/CT16B1_MAT1/SSEL1 */
- __IO uint32_t PIO1_24; /*!< (@ 0x400440C0) I/O configuration for pin PIO1_24/ CT32B0_MAT0 */
- __IO uint32_t PIO1_25; /*!< (@ 0x400440C4) I/O configuration for pin PIO1_25/CT32B0_MAT1 */
- __IO uint32_t PIO1_26; /*!< (@ 0x400440C8) I/O configuration for pin PIO1_26/CT32B0_MAT2/ RXD */
- __IO uint32_t PIO1_27; /*!< (@ 0x400440CC) I/O configuration for pin PIO1_27/CT32B0_MAT3/ TXD */
- __IO uint32_t PIO1_28; /*!< (@ 0x400440D0) I/O configuration for pin PIO1_28/CT32B0_CAP0/ SCLK */
- __IO uint32_t PIO1_29; /*!< (@ 0x400440D4) I/O configuration for pin PIO1_29/SCK0/ CT32B0_CAP1 */
- __IO uint32_t PIO1_30; /*!< (@ 0x400440D8) I/O configuration for pin PIO1_30 */
- __IO uint32_t PIO1_31; /*!< (@ 0x400440DC) I/O configuration for pin PIO1_31 */
-} LPC_IOCON_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- SYSCON -----
-// ------------------------------------------------------------------------------------------------
-
-typedef struct { /*!< (@ 0x40048000) SYSCON Structure */
- __IO uint32_t SYSMEMREMAP; /*!< (@ 0x40048000) System memory remap */
- __IO uint32_t PRESETCTRL; /*!< (@ 0x40048004) Peripheral reset control */
- __IO uint32_t SYSPLLCTRL; /*!< (@ 0x40048008) System PLL control */
- __I uint32_t SYSPLLSTAT; /*!< (@ 0x4004800C) System PLL status */
- __IO uint32_t USBPLLCTRL; /*!< (@ 0x40048010) USB PLL control */
- __I uint32_t USBPLLSTAT; /*!< (@ 0x40048014) USB PLL status */
- __I uint32_t RESERVED0[2];
- __IO uint32_t SYSOSCCTRL; /*!< (@ 0x40048020) System oscillator control */
- __IO uint32_t WDTOSCCTRL; /*!< (@ 0x40048024) Watchdog oscillator control */
- __I uint32_t RESERVED1[2];
- __IO uint32_t SYSRSTSTAT; /*!< (@ 0x40048030) System reset status register */
- __I uint32_t RESERVED2[3];
- __IO uint32_t SYSPLLCLKSEL; /*!< (@ 0x40048040) System PLL clock source select */
- __I uint32_t RESERVED3;
- __IO uint32_t USBPLLCLKSEL; /*!< (@ 0x40048048) USB PLL clock source select */
- __I uint32_t RESERVED4[9];
- __IO uint32_t MAINCLKSEL; /*!< (@ 0x40048070) Main clock source select */
- __I uint32_t RESERVED5;
- __IO uint32_t SYSAHBCLKDIV; /*!< (@ 0x40048078) System clock divider */
- __I uint32_t RESERVED6;
- __IO uint32_t SYSAHBCLKCTRL; /*!< (@ 0x40048080) System clock control */
- __I uint32_t RESERVED7[4];
- __IO uint32_t SSP0CLKDIV; /*!< (@ 0x40048094) SSP0 clock divider */
- __IO uint32_t UARTCLKDIV; /*!< (@ 0x40048098) UART clock divider */
- __IO uint32_t SSP1CLKDIV; /*!< (@ 0x4004809C) SSP1 clock divider */
- __I uint32_t RESERVED8[3];
- __IO uint32_t TRACECLKDIV; /*!< (@ 0x400480AC) ARM trace clock divider */
- __IO uint32_t SYSTICKCLKDIV; /*!< (@ 0x400480B0) SYSTICK clock divder */
- __I uint32_t RESERVED9[3];
- __IO uint32_t USBCLKSEL; /*!< (@ 0x400480C0) USB clock source select */
- __I uint32_t RESERVED10;
- __IO uint32_t USBCLKDIV; /*!< (@ 0x400480C8) USB clock source divider */
- __I uint32_t RESERVED11[5];
- __IO uint32_t CLKOUTSEL; /*!< (@ 0x400480E0) CLKOUT clock source select */
- __I uint32_t RESERVED12;
- __IO uint32_t CLKOUTDIV; /*!< (@ 0x400480E8) CLKOUT clock divider */
- __I uint32_t RESERVED13[5];
- __I uint32_t PIOPORCAP0; /*!< (@ 0x40048100) POR captured PIO status 0 */
- __I uint32_t PIOPORCAP1; /*!< (@ 0x40048104) POR captured PIO status 1 */
- __I uint32_t RESERVED14[18];
- __IO uint32_t BODCTRL; /*!< (@ 0x40048150) Brown-Out Detect */
- __IO uint32_t SYSTCKCAL; /*!< (@ 0x40048154) System tick counter calibration */
- __I uint32_t RESERVED15[6];
- __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IQR delay. Allows trade-off between interrupt latency and determinism. */
- __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */
- __IO uint32_t PINSEL[8]; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register */
- __IO uint32_t USBCLKCTRL; /*!< (@ 0x40048198) USB clock control */
- __I uint32_t USBCLKST; /*!< (@ 0x4004819C) USB clock status */
- __I uint32_t RESERVED16[25];
- __IO uint32_t STARTERP0; /*!< (@ 0x40048204) Start logic 0 interrupt wake-up enable register 0 */
- __I uint32_t RESERVED17[3];
- __IO uint32_t STARTERP1; /*!< (@ 0x40048214) Start logic 1 interrupt wake-up enable register 1 */
- __I uint32_t RESERVED18[6];
- __IO uint32_t PDSLEEPCFG; /*!< (@ 0x40048230) Power-down states in deep-sleep mode */
- __IO uint32_t PDAWAKECFG; /*!< (@ 0x40048234) Power-down states for wake-up from deep-sleep */
- __IO uint32_t PDRUNCFG; /*!< (@ 0x40048238) Power configuration register */
- __I uint32_t RESERVED19[111];
- __I uint32_t DEVICE_ID; /*!< (@ 0x400483F8) Device ID */
-} LPC_SYSCON_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- GPIO_PIN_INT -----
-// ------------------------------------------------------------------------------------------------
-typedef struct { /*!< (@ 0x4004C000) GPIO_PIN_INT Structure */
- __IO uint32_t ISEL; /*!< (@ 0x4004C000) Pin Interrupt Mode register */
- __IO uint32_t IENR; /*!< (@ 0x4004C004) Pin Interrupt Enable (Rising) register */
- __O uint32_t SIENR; /*!< (@ 0x4004C008) Set Pin Interrupt Enable (Rising) register */
- __O uint32_t CIENR; /*!< (@ 0x4004C00C) Clear Pin Interrupt Enable (Rising) register */
- __IO uint32_t IENF; /*!< (@ 0x4004C010) Pin Interrupt Enable Falling Edge / Active Level register */
- __O uint32_t SIENF; /*!< (@ 0x4004C014) Set Pin Interrupt Enable Falling Edge / Active Level register */
- __O uint32_t CIENF; /*!< (@ 0x4004C018) Clear Pin Interrupt Enable Falling Edge / Active Level address */
- __IO uint32_t RISE; /*!< (@ 0x4004C01C) Pin Interrupt Rising Edge register */
- __IO uint32_t FALL; /*!< (@ 0x4004C020) Pin Interrupt Falling Edge register */
- __IO uint32_t IST; /*!< (@ 0x4004C024) Pin Interrupt Status register */
-} LPC_GPIO_PIN_INT_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- SSP1 -----
-// ------------------------------------------------------------------------------------------------
-typedef struct { /*!< (@ 0x40058000) SSP1 Structure */
- __IO uint32_t CR0; /*!< (@ 0x40058000) Control Register 0. Selects the serial clock rate, bus type, and data size. */
- __IO uint32_t CR1; /*!< (@ 0x40058004) Control Register 1. Selects master/slave and other modes. */
- __IO uint32_t DR; /*!< (@ 0x40058008) Data Register. Writes fill the transmit FIFO, and reads empty the receive FIFO. */
- __I uint32_t SR; /*!< (@ 0x4005800C) Status Register */
- __IO uint32_t CPSR; /*!< (@ 0x40058010) Clock Prescale Register */
- __IO uint32_t IMSC; /*!< (@ 0x40058014) Interrupt Mask Set and Clear Register */
- __I uint32_t RIS; /*!< (@ 0x40058018) Raw Interrupt Status Register */
- __I uint32_t MIS; /*!< (@ 0x4005801C) Masked Interrupt Status Register */
- __O uint32_t ICR; /*!< (@ 0x40058020) SSPICR Interrupt Clear Register */
-} LPC_SSP1_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- GPIO_GROUP_INT0 -----
-// ------------------------------------------------------------------------------------------------
-typedef struct { /*!< (@ 0x4005C000) GPIO_GROUP_INT0 Structure */
- __IO uint32_t CTRL; /*!< (@ 0x4005C000) GPIO grouped interrupt control register */
- __I uint32_t RESERVED0[7];
- __IO uint32_t PORT_POL[2]; /*!< (@ 0x4005C020) GPIO grouped interrupt port 0 polarity register */
- __I uint32_t RESERVED1[6];
- __IO uint32_t PORT_ENA[2]; /*!< (@ 0x4005C040) GPIO grouped interrupt port 0/1 enable register */
-} LPC_GPIO_GROUP_INT0_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- GPIO_GROUP_INT1 -----
-// ------------------------------------------------------------------------------------------------
-
-typedef struct { /*!< (@ 0x40060000) GPIO_GROUP_INT1 Structure */
- __IO uint32_t CTRL; /*!< (@ 0x40060000) GPIO grouped interrupt control register */
- __I uint32_t RESERVED0[7];
- __IO uint32_t PORT_POL[2]; /*!< (@ 0x40060020) GPIO grouped interrupt port 0 polarity register */
- __I uint32_t RESERVED1[6];
- __IO uint32_t PORT_ENA[2]; /*!< (@ 0x40060040) GPIO grouped interrupt port 0/1 enable register */
-} LPC_GPIO_GROUP_INT1_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- Repetitive Interrupt Timer (RIT) -----
-// ------------------------------------------------------------------------------------------------
-
-typedef struct { /*!< (@ 0x40064000) RITIMER Structure */
- __IO uint32_t COMPVAL; /*!< (@ 0x40064000) RITIMER compare register */
- __IO uint32_t MASK; /*!< (@ 0x40064004) RITIMER mask register */
- __IO uint32_t CTRL; /*!< (@ 0x40064008) RITIMER control register */
- __IO uint32_t COUNTER; /*!< (@ 0x4006400C) RITIMER counter register */
- __IO uint32_t COMPVAL_H; /*!< (@ 0x40064010) RITIMER compare upper register */
- __IO uint32_t MASK_H; /*!< (@ 0x40064014) RITIMER mask upper register */
- __I uint32_t RESERVED0[1];
- __IO uint32_t COUNTER_H; /*!< (@ 0x4006401C) RITIMER counter upper register */
-} LPC_RITIMER_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- USB -----
-// ------------------------------------------------------------------------------------------------
-typedef struct { /*!< (@ 0x40020000) USB Structure */
- __IO uint32_t DEVCMDSTAT; /*!< (@ 0x40020000) USB Device Command/Status register */
- __IO uint32_t INFO; /*!< (@ 0x40020004) USB Info register */
- __IO uint32_t EPLISTSTART; /*!< (@ 0x40020008) USB EP Command/Status List start address */
- __IO uint32_t DATABUFSTART; /*!< (@ 0x4002000C) USB Data buffer start address */
- __IO uint32_t LPM; /*!< (@ 0x40020010) Link Power Management register */
- __IO uint32_t EPSKIP; /*!< (@ 0x40020014) USB Endpoint skip */
- __IO uint32_t EPINUSE; /*!< (@ 0x40020018) USB Endpoint Buffer in use */
- __IO uint32_t EPBUFCFG; /*!< (@ 0x4002001C) USB Endpoint Buffer Configuration register */
- __IO uint32_t INTSTAT; /*!< (@ 0x40020020) USB interrupt status register */
- __IO uint32_t INTEN; /*!< (@ 0x40020024) USB interrupt enable register */
- __IO uint32_t INTSETSTAT; /*!< (@ 0x40020028) USB set interrupt status register */
- __IO uint32_t INTROUTING; /*!< (@ 0x4002002C) USB interrupt routing register */
- __I uint32_t RESERVED0[1];
- __I uint32_t EPTOGGLE; /*!< (@ 0x40020034) USB Endpoint toggle register */
-} LPC_USB_Type;
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- GPIO_PORT -----
-// ------------------------------------------------------------------------------------------------
-
-typedef struct { /*!< (@ 0x50000000) GPIO_PORT Structure */
- union {
- struct {
- __IO uint8_t B0[32]; /*!< (@ 0x50000000) Byte pin registers port 0; pins PIO0_0 to PIO0_31 */
- __IO uint8_t B1[32]; /*!< (@ 0x50000020) Byte pin registers port 1 */
- };
- __IO uint8_t B[64]; /*!< (@ 0x50000000) Byte pin registers port 0/1 */
- };
- __I uint32_t RESERVED0[1008];
- union {
- struct {
- __IO uint32_t W0[32]; /*!< (@ 0x50001000) Word pin registers port 0 */
- __IO uint32_t W1[32]; /*!< (@ 0x50001080) Word pin registers port 1 */
- };
- __IO uint32_t W[64]; /*!< (@ 0x50001000) Word pin registers port 0/1 */
- };
- __I uint32_t RESERVED1[960];
- __IO uint32_t DIR[2]; /*!< (@ 0x50002000) Direction registers port 0/1 */
- __I uint32_t RESERVED2[30];
- __IO uint32_t MASK[2]; /*!< (@ 0x50002080) Mask register port 0/1 */
- __I uint32_t RESERVED3[30];
- __IO uint32_t PIN[2]; /*!< (@ 0x50002100) Portpin register port 0 */
- __I uint32_t RESERVED4[30];
- __IO uint32_t MPIN[2]; /*!< (@ 0x50002180) Masked port register port 0/1 */
- __I uint32_t RESERVED5[30];
- __IO uint32_t SET[2]; /*!< (@ 0x50002200) Write: Set register for port 0/1 Read: output bits for port 0/1 */
- __I uint32_t RESERVED6[30];
- __O uint32_t CLR[2]; /*!< (@ 0x50002280) Clear port 0/1 */
- __I uint32_t RESERVED7[30];
- __O uint32_t NOT[2]; /*!< (@ 0x50002300) Toggle port 0/1 */
-} LPC_GPIO_Type;
-
-
-#if defined ( __CC_ARM )
- #pragma no_anon_unions
-#endif
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- Peripheral memory map -----
-// ------------------------------------------------------------------------------------------------
-
-#define LPC_I2C_BASE (0x40000000)
-#define LPC_WWDT_BASE (0x40004000)
-#define LPC_USART_BASE (0x40008000)
-#define LPC_CT16B0_BASE (0x4000C000)
-#define LPC_CT16B1_BASE (0x40010000)
-#define LPC_CT32B0_BASE (0x40014000)
-#define LPC_CT32B1_BASE (0x40018000)
-#define LPC_ADC_BASE (0x4001C000)
-#define LPC_PMU_BASE (0x40038000)
-#define LPC_FLASHCTRL_BASE (0x4003C000)
-#define LPC_SSP0_BASE (0x40040000)
-#define LPC_IOCON_BASE (0x40044000)
-#define LPC_SYSCON_BASE (0x40048000)
-#define LPC_GPIO_PIN_INT_BASE (0x4004C000)
-#define LPC_SSP1_BASE (0x40058000)
-#define LPC_GPIO_GROUP_INT0_BASE (0x4005C000)
-#define LPC_GPIO_GROUP_INT1_BASE (0x40060000)
-#define LPC_RITIMER_BASE (0x40064000)
-#define LPC_USB_BASE (0x40080000)
-#define LPC_GPIO_BASE (0x50000000)
-
-
-// ------------------------------------------------------------------------------------------------
-// ----- Peripheral declaration -----
-// ------------------------------------------------------------------------------------------------
-
-#define LPC_I2C ((LPC_I2C_Type *) LPC_I2C_BASE)
-#define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE)
-#define LPC_USART ((LPC_USART_Type *) LPC_USART_BASE)
-#define LPC_CT16B0 ((LPC_CT16B0_Type *) LPC_CT16B0_BASE)
-#define LPC_CT16B1 ((LPC_CT16B1_Type *) LPC_CT16B1_BASE)
-#define LPC_CT32B0 ((LPC_CT32B0_Type *) LPC_CT32B0_BASE)
-#define LPC_CT32B1 ((LPC_CT32B1_Type *) LPC_CT32B1_BASE)
-#define LPC_ADC ((LPC_ADC_Type *) LPC_ADC_BASE)
-#define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE)
-#define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE)
-#define LPC_SSP0 ((LPC_SSP0_Type *) LPC_SSP0_BASE)
-#define LPC_SSP1 ((LPC_SSP1_Type *) LPC_SSP1_BASE)
-#define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE)
-#define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE)
-#define LPC_GPIO_PIN_INT ((LPC_GPIO_PIN_INT_Type *) LPC_GPIO_PIN_INT_BASE)
-#define LPC_GPIO_GROUP_INT0 ((LPC_GPIO_GROUP_INT0_Type*) LPC_GPIO_GROUP_INT0_BASE)
-#define LPC_GPIO_GROUP_INT1 ((LPC_GPIO_GROUP_INT1_Type*) LPC_GPIO_GROUP_INT1_BASE)
-#define LPC_RITIMER ((LPC_RITIMER_Type *) LPC_RITIMER_BASE)
-#define LPC_USB ((LPC_USB_Type *) LPC_USB_BASE)
-#define LPC_GPIO ((LPC_GPIO_Type *) LPC_GPIO_BASE)
-
-
-/** @} */ /* End of group Device_Peripheral_Registers */
-/** @} */ /* End of group (null) */
-/** @} */ /* End of group h1usf */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif // __LPC13UXX_H__
+
+/****************************************************************************************************//**
+ * @file LPC13Uxx.h
+ *
+ *
+ *
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File for
+ * default LPC13Uxx Device Series
+ *
+ * @version V0.1
+ * @date 18. Jan 2012
+ *
+ * @note Generated with SFDGen V2.6 Build 4f on Tuesday, 17.01.2012 13:39:52
+ *
+ * from CMSIS SVD File 'LPC13uxx_svd_v0.1.xml' Version 0.1,
+ * created on Thurs, 01.19.2012 15:13:15, last modified on Thurs, 01.19.2012 15:53:09
+ *
+ *******************************************************************************************************/
+
+/** @addtogroup NXP
+ * @{
+ */
+
+/** @addtogroup LPC13Uxx
+ * @{
+ */
+
+#ifndef __LPC13UXX_H__
+#define __LPC13UXX_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#if defined ( __CC_ARM )
+ #pragma anon_unions
+#endif
+
+ /* Interrupt Number Definition */
+
+typedef enum {
+// ------------------------- Cortex-M3 Processor Exceptions Numbers -----------------------------
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ MemoryManagement_IRQn = -12, /*!< 4 Memory Management, MPU mismatch, including Access Violation and No Match */
+ BusFault_IRQn = -11, /*!< 5 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory related Fault */
+ UsageFault_IRQn = -10, /*!< 6 Usage Fault, i.e. Undef Instruction, Illegal State Transition */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+// ---------------------------- LPC13Uxx Specific Interrupt Numbers --------------------------------
+ PIN_INT0_IRQn = 0, /*!< 0 PIN_INT0 */
+ PIN_INT1_IRQn = 1, /*!< 1 PIN_INT1 */
+ PIN_INT2_IRQn = 2, /*!< 2 PIN_INT2 */
+ PIN_INT3_IRQn = 3, /*!< 3 PIN_INT3 */
+ PIN_INT4_IRQn = 4, /*!< 4 PIN_INT4 */
+ PIN_INT5_IRQn = 5, /*!< 5 PIN_INT5 */
+ PIN_INT6_IRQn = 6, /*!< 6 PIN_INT6 */
+ PIN_INT7_IRQn = 7, /*!< 7 PIN_INT7 */
+ GINT0_IRQn = 8, /*!< 8 GINT0 */
+ GINT1_IRQn = 9, /*!< 9 GINT1 */
+ Reserved0_IRQn = 10, /*!< 10 Reserved Interrupt */
+ Reserved1_IRQn = 11, /*!< 11 Reserved Interrupt */
+ RIT_IRQn = 12, /*!< 12 Repetitive Interrupt Timer */
+ Reserved2_IRQn = 13, /*!< 13 Reserved Interrupt */
+ SSP1_IRQn = 14, /*!< 14 SSP1 */
+ I2C_IRQn = 15, /*!< 15 I2C */
+ CT16B0_IRQn = 16, /*!< 16 CT16B0 */
+ CT16B1_IRQn = 17, /*!< 17 CT16B1 */
+ CT32B0_IRQn = 18, /*!< 18 CT32B0 */
+ CT32B1_IRQn = 19, /*!< 19 CT32B1 */
+ SSP0_IRQn = 20, /*!< 20 SSP0 */
+ USART_IRQn = 21, /*!< 21 USART */
+ USB_IRQ_IRQn = 22, /*!< 22 USB_IRQ */
+ USB_FIQ_IRQn = 23, /*!< 23 USB_FIQ */
+ ADC_IRQn = 24, /*!< 24 ADC */
+ WDT_IRQn = 25, /*!< 25 WDT */
+ BOD_IRQn = 26, /*!< 26 BOD */
+ FMC_IRQn = 27, /*!< 27 FMC */
+ Reserved3_IRQn = 28, /*!< 28 Reserved Interrupt */
+ Reserved4_IRQn = 29, /*!< 29 Reserved Interrupt */
+ USBWAKEUP_IRQn = 30, /*!< 30 USBWAKEUP */
+ Reserved5_IRQn = 31, /*!< 31 Reserved Interrupt */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+/* Processor and Core Peripheral Section */ /* Configuration of the Cortex-M3 Processor and Core Peripherals */
+
+#define __CM3_REV 0x0000 /*!< Cortex-M3 Core Revision */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include /*!< Cortex-M3 processor and core peripherals */
+#include "system_LPC13Uxx.h" /*!< LPC13Uxx System */
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- I2C -----
+// ------------------------------------------------------------------------------------------------
+
+
+
+typedef struct { /*!< (@ 0x40000000) I2C Structure */
+ __IO uint32_t CONSET; /*!< (@ 0x40000000) I2C Control Set Register. When a one is written to a bit of this register, the corresponding bit in the I2C control register is set. Writing a zero has no effect on the corresponding bit in the I2C control register. */
+ __I uint32_t STAT; /*!< (@ 0x40000004) I2C Status Register. During I2C operation, this register provides detailed status codes that allow software to determine the next action needed. */
+ __IO uint32_t DAT; /*!< (@ 0x40000008) I2C Data Register. During master or slave transmit mode, data to be transmitted is written to this register. During master or slave receive mode, data that has been received may be read from this register. */
+ __IO uint32_t ADR0; /*!< (@ 0x4000000C) I2C Slave Address Register 0. Contains the 7-bit slave address for operation of the I2C interface in slave mode, and is not used in master mode. The least significant bit determines whether a slave responds to the General Call address. */
+ __IO uint32_t SCLH; /*!< (@ 0x40000010) SCH Duty Cycle Register High Half Word. Determines the high time of the I2C clock. */
+ __IO uint32_t SCLL; /*!< (@ 0x40000014) SCL Duty Cycle Register Low Half Word. Determines the low time of the I2C clock. I2nSCLL and I2nSCLH together determine the clock frequency generated by an I2C master and certain times used in slave mode. */
+ __O uint32_t CONCLR; /*!< (@ 0x40000018) I2C Control Clear Register. When a one is written to a bit of this register, the corresponding bit in the I2C control register is cleared. Writing a zero has no effect on the corresponding bit in the I2C control register. */
+ __IO uint32_t MMCTRL; /*!< (@ 0x4000001C) Monitor mode control register. */
+ union{
+ __IO uint32_t ADR[3]; /*!< (@ 0x40000020) I2C Slave Address Register. Contains the 7-bit slave address for operation of the I2C interface in slave mode, and is not used in master mode. The least significant bit determines whether a slave responds to the General Call address. */
+ struct{
+ __IO uint32_t ADR1;
+ __IO uint32_t ADR2;
+ __IO uint32_t ADR3;
+ };
+ };
+ __I uint32_t DATA_BUFFER; /*!< (@ 0x4000002C) Data buffer register. The contents of the 8 MSBs of the I2DAT shift register will be transferred to the DATA_BUFFER automatically after every nine bits (8 bits of data plus ACK or NACK) has been received on the bus. */
+ union{
+ __IO uint32_t MASK[4]; /*!< (@ 0x40000030) I2C Slave address mask register. This mask register is associated with I2ADR0 to determine an address match. The mask register has no effect when comparing to the General Call address (0000000). */
+ struct{
+ __IO uint32_t MASK0;
+ __IO uint32_t MASK1;
+ __IO uint32_t MASK2;
+ __IO uint32_t MASK3;
+ };
+ };
+} LPC_I2C_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- WWDT -----
+// ------------------------------------------------------------------------------------------------
+
+
+typedef struct { /*!< (@ 0x40004000) WWDT Structure */
+ __IO uint32_t MOD; /*!< (@ 0x40004000) Watchdog mode register. This register contains the basic mode and status of the Watchdog Timer. */
+ __IO uint32_t TC; /*!< (@ 0x40004004) Watchdog timer constant register. This 24-bit register determines the time-out value. */
+ __O uint32_t FEED; /*!< (@ 0x40004008) Watchdog feed sequence register. Writing 0xAA followed by 0x55 to this register reloads the Watchdog timer with the value contained in WDTC. */
+ __I uint32_t TV; /*!< (@ 0x4000400C) Watchdog timer value register. This 24-bit register reads out the current value of the Watchdog timer. */
+ __IO uint32_t CLKSEL; /*!< (@ 0x40004010) Watchdog clock select register. */
+ __IO uint32_t WARNINT; /*!< (@ 0x40004014) Watchdog Warning Interrupt compare value. */
+ __IO uint32_t WINDOW; /*!< (@ 0x40004018) Watchdog Window compare value. */
+} LPC_WWDT_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- USART -----
+// ------------------------------------------------------------------------------------------------
+
+
+typedef struct { /*!< (@ 0x40008000) USART Structure */
+
+ union {
+ __IO uint32_t DLL; /*!< (@ 0x40008000) Divisor Latch LSB. Least significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
+ __O uint32_t THR; /*!< (@ 0x40008000) Transmit Holding Register. The next character to be transmitted is written here. (DLAB=0) */
+ __I uint32_t RBR; /*!< (@ 0x40008000) Receiver Buffer Register. Contains the next received character to be read. (DLAB=0) */
+ };
+
+ union {
+ __IO uint32_t IER; /*!< (@ 0x40008004) Interrupt Enable Register. Contains individual interrupt enable bits for the 7 potential USART interrupts. (DLAB=0) */
+ __IO uint32_t DLM; /*!< (@ 0x40008004) Divisor Latch MSB. Most significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
+ };
+
+ union {
+ __O uint32_t FCR; /*!< (@ 0x40008008) FIFO Control Register. Controls USART FIFO usage and modes. */
+ __I uint32_t IIR; /*!< (@ 0x40008008) Interrupt ID Register. Identifies which interrupt(s) are pending. */
+ };
+ __IO uint32_t LCR; /*!< (@ 0x4000800C) Line Control Register. Contains controls for frame formatting and break generation. */
+ __IO uint32_t MCR; /*!< (@ 0x40008010) Modem Control Register. */
+ __I uint32_t LSR; /*!< (@ 0x40008014) Line Status Register. Contains flags for transmit and receive status, including line errors. */
+ __I uint32_t MSR; /*!< (@ 0x40008018) Modem Status Register. */
+ __IO uint32_t SCR; /*!< (@ 0x4000801C) Scratch Pad Register. Eight-bit temporary storage for software. */
+ __IO uint32_t ACR; /*!< (@ 0x40008020) Auto-baud Control Register. Contains controls for the auto-baud feature. */
+ __IO uint32_t ICR; /*!< (@ 0x40008024) IrDA Control Register. Enables and configures the IrDA (remote control) mode. */
+ __IO uint32_t FDR; /*!< (@ 0x40008028) Fractional Divider Register. Generates a clock input for the baud rate divider. */
+ __IO uint32_t OSR; /*!< (@ 0x4000802C) Oversampling Register. Controls the degree of oversampling during each bit time. */
+ __IO uint32_t TER; /*!< (@ 0x40008030) Transmit Enable Register. Turns off USART transmitter for use with software flow control. */
+ __I uint32_t RESERVED0[3];
+ __IO uint32_t HDEN; /*!< (@ 0x40008040) Half duplex enable register. */
+ __I uint32_t RESERVED1;
+ __IO uint32_t SCICTRL; /*!< (@ 0x40008048) Smart Card Interface Control register. Enables and configures the Smart Card Interface feature. */
+ __IO uint32_t RS485CTRL; /*!< (@ 0x4000804C) RS-485/EIA-485 Control. Contains controls to configure various aspects of RS-485/EIA-485 modes. */
+ __IO uint32_t RS485ADRMATCH; /*!< (@ 0x40008050) RS-485/EIA-485 address match. Contains the address match value for RS-485/EIA-485 mode. */
+ __IO uint32_t RS485DLY; /*!< (@ 0x40008054) RS-485/EIA-485 direction control delay. */
+ __IO uint32_t SYNCCTRL; /*!< (@ 0x40008058) Synchronous mode control register. */
+} LPC_USART_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- CT16B0 -----
+// ------------------------------------------------------------------------------------------------
+
+typedef struct { /*!< (@ 0x4000C000) CT16B0 Structure */
+ __IO uint32_t IR; /*!< (@ 0x4000C000) Interrupt Register. The IR can be written to clear interrupts. The IR can be read to identify which of eight possible interrupt sources are pending. */
+ __IO uint32_t TCR; /*!< (@ 0x4000C004) Timer Control Register. The TCR is used to control the Timer Counter functions. The Timer Counter can be disabled or reset through the TCR. */
+ __IO uint32_t TC; /*!< (@ 0x4000C008) Timer Counter. The 16-bit TC is incremented every PR+1 cycles of PCLK. The TC is controlled through the TCR. */
+ __IO uint32_t PR; /*!< (@ 0x4000C00C) Prescale Register. When the Prescale Counter (below) is equal to this value, the next clock increments the TC and clears the PC. */
+ __IO uint32_t PC; /*!< (@ 0x4000C010) Prescale Counter. The 16-bit PC is a counter which is incremented to the value stored in PR. When the value in PR is reached, the TC is incremented and the PC is cleared. The PC is observable and controllable through the bus interface. */
+ __IO uint32_t MCR; /*!< (@ 0x4000C014) Match Control Register. The MCR is used to control if an interrupt is generated and if the TC is reset when a Match occurs. */
+ union {
+ __IO uint32_t MR[4]; /*!< (@ 0x4000C018) Match Register. MR can be enabled through the MCR to reset the TC, stop both the TC and PC, and/or generate an interrupt every time MR matches the TC. */
+ struct{
+ __IO uint32_t MR0; /*!< (@ 0x4000C018) Match Register. MR0 */
+ __IO uint32_t MR1; /*!< (@ 0x4000C01C) Match Register. MR1 */
+ __IO uint32_t MR2; /*!< (@ 0x4000C020) Match Register. MR2 */
+ __IO uint32_t MR3; /*!< (@ 0x4000C024) Match Register. MR3 */
+ };
+ };
+ __IO uint32_t CCR; /*!< (@ 0x4000C028) Capture Control Register. The CCR controls which edges of the capture inputs are used to load the Capture Registers and whether or not an interrupt is generated when a capture takes place. */
+ union{
+ __I uint32_t CR[4]; /*!< (@ 0x4000C02C) Capture Register. CR is loaded with the value of TC when there is an event on the CT16B0_CAP input. */
+ struct{
+ __I uint32_t CR0; /*!< (@ 0x4000C02C) Capture Register. CR 0 */
+ __I uint32_t CR1; /*!< (@ 0x4000C030) Capture Register. CR 1 */
+ __I uint32_t CR2; /*!< (@ 0x4000C034) Capture Register. CR 2 */
+ __I uint32_t CR3; /*!< (@ 0x4000C038) Capture Register. CR 3 */
+ };
+ };
+ __IO uint32_t EMR; /*!< (@ 0x4000C03C) External Match Register. The EMR controls the match function and the external match pins */
+ __I uint32_t RESERVED0[12];
+ __IO uint32_t CTCR; /*!< (@ 0x4000C070) Count Control Register. The CTCR selects between Timer and Counter mode, and in Counter mode selects the signal and edge(s) for counting. */
+ __IO uint32_t PWMC; /*!< (@ 0x4000C074) PWM Control Register. The PWMCON enables PWM mode for the external match pins CT16B0_MAT[1:0] and CT16B1_MAT[1:0]. */
+} LPC_CT16B0_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- CT16B1 -----
+// ------------------------------------------------------------------------------------------------
+
+typedef struct { /*!< (@ 0x40010000) CT16B1 Structure */
+ __IO uint32_t IR; /*!< (@ 0x40010000) Interrupt Register. The IR can be written to clear interrupts. The IR can be read to identify which of eight possible interrupt sources are pending. */
+ __IO uint32_t TCR; /*!< (@ 0x40010004) Timer Control Register. The TCR is used to control the Timer Counter functions. The Timer Counter can be disabled or reset through the TCR. */
+ __IO uint32_t TC; /*!< (@ 0x40010008) Timer Counter. The 16-bit TC is incremented every PR+1 cycles of PCLK. The TC is controlled through the TCR. */
+ __IO uint32_t PR; /*!< (@ 0x4001000C) Prescale Register. When the Prescale Counter (below) is equal to this value, the next clock increments the TC and clears the PC. */
+ __IO uint32_t PC; /*!< (@ 0x40010010) Prescale Counter. The 16-bit PC is a counter which is incremented to the value stored in PR. When the value in PR is reached, the TC is incremented and the PC is cleared. The PC is observable and controllable through the bus interface. */
+ __IO uint32_t MCR; /*!< (@ 0x40010014) Match Control Register. The MCR is used to control if an interrupt is generated and if the TC is reset when a Match occurs. */
+ union {
+ __IO uint32_t MR[4]; /*!< (@ 0x40010018) Match Register. MR can be enabled through the MCR to reset the TC, stop both the TC and PC, and/or generate an interrupt every time MR matches the TC. */
+ struct{
+ __IO uint32_t MR0; /*!< (@ 0x40010018) Match Register. MR0 */
+ __IO uint32_t MR1; /*!< (@ 0x4001001C) Match Register. MR1 */
+ __IO uint32_t MR2; /*!< (@ 0x40010020) Match Register. MR2 */
+ __IO uint32_t MR3; /*!< (@ 0x40010024) Match Register. MR3 */
+ };
+ };
+ __IO uint32_t CCR; /*!< (@ 0x40010028) Capture Control Register. The CCR controls which edges of the capture inputs are used to load the Capture Registers and whether or not an interrupt is generated when a capture takes place. */
+ union{
+ __I uint32_t CR[4]; /*!< (@ 0x4001002C) Capture Register. CR is loaded with the value of TC when there is an event on the CT16B0_CAP input. */
+ struct{
+ __I uint32_t CR0; /*!< (@ 0x4001002C) Capture Register. CR 0 */
+ __I uint32_t CR1; /*!< (@ 0x40010030) Capture Register. CR 1 */
+ __I uint32_t CR2; /*!< (@ 0x40010034) Capture Register. CR 2 */
+ __I uint32_t CR3; /*!< (@ 0x40010038) Capture Register. CR 3 */
+ };
+ };
+ __IO uint32_t EMR; /*!< (@ 0x4001003C) External Match Register. The EMR controls the match function and the external match pins */
+ __I uint32_t RESERVED0[12];
+ __IO uint32_t CTCR; /*!< (@ 0x40010070) Count Control Register. The CTCR selects between Timer and Counter mode, and in Counter mode selects the signal and edge(s) for counting. */
+ __IO uint32_t PWMC; /*!< (@ 0x40010074) PWM Control Register. The PWMCON enables PWM mode for the external match pins CT16B0_MAT[1:0] and CT16B1_MAT[1:0]. */
+} LPC_CT16B1_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- CT32B0 -----
+// ------------------------------------------------------------------------------------------------
+typedef struct { /*!< (@ 0x40014000) CT32B0 Structure */
+ __IO uint32_t IR; /*!< (@ 0x40014000) Interrupt Register. The IR can be written to clear interrupts. The IR can be read to identify which of eight possible interrupt sources are pending. */
+ __IO uint32_t TCR; /*!< (@ 0x40014004) Timer Control Register. The TCR is used to control the Timer Counter functions. The Timer Counter can be disabled or reset through the TCR. */
+ __IO uint32_t TC; /*!< (@ 0x40014008) Timer Counter. The 32-bit TC is incremented every PR+1 cycles of PCLK. The TC is controlled through the TCR. */
+ __IO uint32_t PR; /*!< (@ 0x4001400C) Prescale Register. When the Prescale Counter (below) is equal to this value, the next clock increments the TC and clears the PC. */
+ __IO uint32_t PC; /*!< (@ 0x40014010) Prescale Counter. The 32-bit PC is a counter which is incremented to the value stored in PR. When the value in PR is reached, the TC is incremented and the PC is cleared. The PC is observable and controllable through the bus interface. */
+ __IO uint32_t MCR; /*!< (@ 0x40014014) Match Control Register. The MCR is used to control if an interrupt is generated and if the TC is reset when a Match occurs. */
+ union {
+ __IO uint32_t MR[4]; /*!< (@ 0x40014018) Match Register. MR can be enabled through the MCR to reset the TC, stop both the TC and PC, and/or generate an interrupt every time MR matches the TC. */
+ struct{
+ __IO uint32_t MR0; /*!< (@ 0x40014018) Match Register. MR0 */
+ __IO uint32_t MR1; /*!< (@ 0x4001401C) Match Register. MR1 */
+ __IO uint32_t MR2; /*!< (@ 0x40014020) Match Register. MR2 */
+ __IO uint32_t MR3; /*!< (@ 0x40014024) Match Register. MR3 */
+ };
+ };
+ __IO uint32_t CCR; /*!< (@ 0x40014028) Capture Control Register. The CCR controls which edges of the capture inputs are used to load the Capture Registers and whether or not an interrupt is generated when a capture takes place. */
+ union{
+ __I uint32_t CR[4]; /*!< (@ 0x4001402C) Capture Register. CR is loaded with the value of TC when there is an event on the CT32B_CAP0 input. */
+ struct{
+ __I uint32_t CR0; /*!< (@ 0x4001402C) Capture Register. CR 0 */
+ __I uint32_t CR1; /*!< (@ 0x40014030) Capture Register. CR 1 */
+ __I uint32_t CR2; /*!< (@ 0x40014034) Capture Register. CR 2 */
+ __I uint32_t CR3; /*!< (@ 0x40014038) Capture Register. CR 3 */
+ };
+ };
+ __IO uint32_t EMR; /*!< (@ 0x4001403C) External Match Register. The EMR controls the match function and the external match pins CT32Bn_MAT[3:0]. */
+ __I uint32_t RESERVED0[12];
+ __IO uint32_t CTCR; /*!< (@ 0x40014070) Count Control Register. The CTCR selects between Timer and Counter mode, and in Counter mode selects the signal and edge(s) for counting. */
+ __IO uint32_t PWMC; /*!< (@ 0x40014074) PWM Control Register. The PWMCON enables PWM mode for the external match pins CT32Bn_MAT[3:0]. */
+} LPC_CT32B0_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- CT32B1 -----
+// ------------------------------------------------------------------------------------------------
+typedef struct { /*!< (@ 0x40018000) CT32B1 Structure */
+ __IO uint32_t IR; /*!< (@ 0x40018000) Interrupt Register. The IR can be written to clear interrupts. The IR can be read to identify which of eight possible interrupt sources are pending. */
+ __IO uint32_t TCR; /*!< (@ 0x40018004) Timer Control Register. The TCR is used to control the Timer Counter functions. The Timer Counter can be disabled or reset through the TCR. */
+ __IO uint32_t TC; /*!< (@ 0x40018008) Timer Counter. The 32-bit TC is incremented every PR+1 cycles of PCLK. The TC is controlled through the TCR. */
+ __IO uint32_t PR; /*!< (@ 0x4001800C) Prescale Register. When the Prescale Counter (below) is equal to this value, the next clock increments the TC and clears the PC. */
+ __IO uint32_t PC; /*!< (@ 0x40018010) Prescale Counter. The 32-bit PC is a counter which is incremented to the value stored in PR. When the value in PR is reached, the TC is incremented and the PC is cleared. The PC is observable and controllable through the bus interface. */
+ __IO uint32_t MCR; /*!< (@ 0x40018014) Match Control Register. The MCR is used to control if an interrupt is generated and if the TC is reset when a Match occurs. */
+ union {
+ __IO uint32_t MR[4]; /*!< (@ 0x40018018) Match Register. MR can be enabled through the MCR to reset the TC, stop both the TC and PC, and/or generate an interrupt every time MR matches the TC. */
+ struct{
+ __IO uint32_t MR0; /*!< (@ 0x40018018) Match Register. MR0 */
+ __IO uint32_t MR1; /*!< (@ 0x4001801C) Match Register. MR1 */
+ __IO uint32_t MR2; /*!< (@ 0x40018020) Match Register. MR2 */
+ __IO uint32_t MR3; /*!< (@ 0x40018024) Match Register. MR3 */
+ };
+ };
+ __IO uint32_t CCR; /*!< (@ 0x40018028) Capture Control Register. The CCR controls which edges of the capture inputs are used to load the Capture Registers and whether or not an interrupt is generated when a capture takes place. */
+ union{
+ __I uint32_t CR[4]; /*!< (@ 0x4001802C) Capture Register. CR is loaded with the value of TC when there is an event on the CT32B_CAP0 input. */
+ struct{
+ __I uint32_t CR0; /*!< (@ 0x4001802C) Capture Register. CR 0 */
+ __I uint32_t CR1; /*!< (@ 0x40018030) Capture Register. CR 1 */
+ __I uint32_t CR2; /*!< (@ 0x40018034) Capture Register. CR 2 */
+ __I uint32_t CR3; /*!< (@ 0x40018038) Capture Register. CR 3 */
+ };
+ };
+ __IO uint32_t EMR; /*!< (@ 0x4001803C) External Match Register. The EMR controls the match function and the external match pins CT32Bn_MAT[3:0]. */
+ __I uint32_t RESERVED0[12];
+ __IO uint32_t CTCR; /*!< (@ 0x40018070) Count Control Register. The CTCR selects between Timer and Counter mode, and in Counter mode selects the signal and edge(s) for counting. */
+ __IO uint32_t PWMC; /*!< (@ 0x40018074) PWM Control Register. The PWMCON enables PWM mode for the external match pins CT32Bn_MAT[3:0]. */
+} LPC_CT32B1_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- ADC -----
+// ------------------------------------------------------------------------------------------------
+typedef struct { /*!< (@ 0x4001C000) ADC Structure */
+ __IO uint32_t CR; /*!< (@ 0x4001C000) A/D Control Register. The CR register must be written to select the operating mode before A/D conversion can occur. */
+ __IO uint32_t GDR; /*!< (@ 0x4001C004) A/D Global Data Register. Contains the result of the most recent A/D conversion. */
+ __I uint32_t RESERVED0[1];
+ __IO uint32_t INTEN; /*!< (@ 0x4001C00C) A/D Interrupt Enable Register. This register contains enable bits that allow the DONE flag of each A/D channel to be included or excluded from contributing to the generation of an A/D interrupt. */
+ union{
+ __I uint32_t DR[8]; /*!< (@ 0x4001C010) A/D Channel Data Register*/
+ struct{
+ __I uint32_t DR0; /*!< (@ 0x4001C010) A/D Channel Data Register 0*/
+ __I uint32_t DR1; /*!< (@ 0x4001C014) A/D Channel Data Register 1*/
+ __I uint32_t DR2; /*!< (@ 0x4001C018) A/D Channel Data Register 2*/
+ __I uint32_t DR3; /*!< (@ 0x4001C01C) A/D Channel Data Register 3*/
+ __I uint32_t DR4; /*!< (@ 0x4001C020) A/D Channel Data Register 4*/
+ __I uint32_t DR5; /*!< (@ 0x4001C024) A/D Channel Data Register 5*/
+ __I uint32_t DR6; /*!< (@ 0x4001C028) A/D Channel Data Register 6*/
+ __I uint32_t DR7; /*!< (@ 0x4001C02C) A/D Channel Data Register 7*/
+ };
+ };
+ __I uint32_t STAT; /*!< (@ 0x4001C030) A/D Status Register. This register contains DONE and OVERRUN flags for all of the A/D channels, as well as the A/D interrupt flag. */
+} LPC_ADC_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- PMU -----
+// ------------------------------------------------------------------------------------------------
+
+typedef struct { /*!< (@ 0x40038000) PMU Structure */
+ __IO uint32_t PCON; /*!< (@ 0x40038000) Power control register */
+ union{
+ __IO uint32_t GPREG[4]; /*!< (@ 0x40038004) General purpose register 0 */
+ struct{
+ __IO uint32_t GPREG0; /*!< (@ 0x40038004) General purpose register 0 */
+ __IO uint32_t GPREG1; /*!< (@ 0x40038008) General purpose register 1 */
+ __IO uint32_t GPREG2; /*!< (@ 0x4003800C) General purpose register 2 */
+ __IO uint32_t GPREG3; /*!< (@ 0x40038010) General purpose register 3 */
+ };
+ };
+ __IO uint32_t GPREG4; /*!< (@ 0x40038014) General purpose register 4 */
+} LPC_PMU_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- FLASHCTRL -----
+// ------------------------------------------------------------------------------------------------
+
+typedef struct { /*!< (@ 0x4003C000) FLASHCTRL Structure */
+ __I uint32_t RESERVED0[4];
+ __IO uint32_t FLASHCFG; /*!< (@ 0x4003C010) Flash memory access time configuration register */
+ __I uint32_t RESERVED1[3];
+ __IO uint32_t FMSSTART; /*!< (@ 0x4003C020) Signature start address register */
+ __IO uint32_t FMSSTOP; /*!< (@ 0x4003C024) Signature stop-address register */
+ __I uint32_t RESERVED2[1];
+ __I uint32_t FMSW0; /*!< (@ 0x4003C02C) Word 0 [31:0] */
+ __I uint32_t FMSW1; /*!< (@ 0x4003C030) Word 1 [63:32] */
+ __I uint32_t FMSW2; /*!< (@ 0x4003C034) Word 2 [95:64] */
+ __I uint32_t FMSW3; /*!< (@ 0x4003C038) Word 3 [127:96] */
+ __I uint32_t RESERVED3[1001];
+ __I uint32_t FMSTAT; /*!< (@ 0x4003CFE0) Signature generation status register */
+ __I uint32_t RESERVED4[1];
+ __O uint32_t FMSTATCLR; /*!< (@ 0x4003CFE8) Signature generation status clear register */
+} LPC_FLASHCTRL_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- SSP0 -----
+// ------------------------------------------------------------------------------------------------
+typedef struct { /*!< (@ 0x40040000) SSP0 Structure */
+ __IO uint32_t CR0; /*!< (@ 0x40040000) Control Register 0. Selects the serial clock rate, bus type, and data size. */
+ __IO uint32_t CR1; /*!< (@ 0x40040004) Control Register 1. Selects master/slave and other modes. */
+ __IO uint32_t DR; /*!< (@ 0x40040008) Data Register. Writes fill the transmit FIFO, and reads empty the receive FIFO. */
+ __I uint32_t SR; /*!< (@ 0x4004000C) Status Register */
+ __IO uint32_t CPSR; /*!< (@ 0x40040010) Clock Prescale Register */
+ __IO uint32_t IMSC; /*!< (@ 0x40040014) Interrupt Mask Set and Clear Register */
+ __I uint32_t RIS; /*!< (@ 0x40040018) Raw Interrupt Status Register */
+ __I uint32_t MIS; /*!< (@ 0x4004001C) Masked Interrupt Status Register */
+ __O uint32_t ICR; /*!< (@ 0x40040020) SSPICR Interrupt Clear Register */
+} LPC_SSP0_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- IOCON -----
+// ------------------------------------------------------------------------------------------------
+typedef struct { /*!< (@ 0x40044000) IOCON Structure */
+ __IO uint32_t RESET_PIO0_0; /*!< (@ 0x40044000) I/O configuration for pin RESET/PIO0_0 */
+ __IO uint32_t PIO0_1; /*!< (@ 0x40044004) I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2/USB_FTOGGLE */
+ __IO uint32_t PIO0_2; /*!< (@ 0x40044008) I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 */
+ __IO uint32_t PIO0_3; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_3/USB_VBUS */
+ __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4/SCL */
+ __IO uint32_t PIO0_5; /*!< (@ 0x40044014) I/O configuration for pin PIO0_5/SDA */
+ __IO uint32_t PIO0_6; /*!< (@ 0x40044018) I/O configuration for pin PIO0_6/USB_CONNECT/SCK0 */
+ __IO uint32_t PIO0_7; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_7/CTS */
+ __IO uint32_t PIO0_8; /*!< (@ 0x40044020) I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0/SWO */
+ __IO uint32_t PIO0_9; /*!< (@ 0x40044024) I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1/TRACECLK */
+ __IO uint32_t SWCLK_PIO0_10; /*!< (@ 0x40044028) I/O configuration for pin SWCLK/PIO0_10/ SCK0/CT16B0_MAT2 */
+ __IO uint32_t TDI_PIO0_11; /*!< (@ 0x4004402C) I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 */
+ __IO uint32_t TMS_PIO0_12; /*!< (@ 0x40044030) I/O configuration for pin TMS/PIO0_12/AD1/CT32B1_CAP0 */
+ __IO uint32_t TDO_PIO0_13; /*!< (@ 0x40044034) I/O configuration for pin TDO/PIO0_13/AD2/CT32B1_MAT0 */
+ __IO uint32_t TRST_PIO0_14; /*!< (@ 0x40044038) I/O configuration for pin TRST/PIO0_14/AD3/CT32B1_MAT1 */
+ __IO uint32_t SWDIO_PIO0_15; /*!< (@ 0x4004403C) I/O configuration for pin SWDIO/PIO0_15/AD4/CT32B1_MAT2 */
+ __IO uint32_t PIO0_16; /*!< (@ 0x40044040) I/O configuration for pin PIO0_16/AD5/CT32B1_MAT3/ WAKEUP */
+ __IO uint32_t PIO0_17; /*!< (@ 0x40044044) I/O configuration for pin PIO0_17/RTS/CT32B0_CAP0/SCLK */
+ __IO uint32_t PIO0_18; /*!< (@ 0x40044048) I/O configuration for pin PIO0_18/RXD/CT32B0_MAT0 */
+ __IO uint32_t PIO0_19; /*!< (@ 0x4004404C) I/O configuration for pin PIO0_19/TXD/CT32B0_MAT1 */
+ __IO uint32_t PIO0_20; /*!< (@ 0x40044050) I/O configuration for pin PIO0_20/CT16B1_CAP0 */
+ __IO uint32_t PIO0_21; /*!< (@ 0x40044054) I/O configuration for pin PIO0_21/CT16B1_MAT0/MOSI1 */
+ __IO uint32_t PIO0_22; /*!< (@ 0x40044058) I/O configuration for pin PIO0_22/AD6/CT16B1_MAT1/MISO1 */
+ __IO uint32_t PIO0_23; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_23/AD7 */
+ __IO uint32_t PIO1_0; /*!< (@ 0x40044060) I/O configuration for pin PIO1_0/CT32B1_MAT0 */
+ __IO uint32_t PIO1_1; /*!< (@ 0x40044064) I/O configuration for pin PIO1_1/CT32B1_MAT1 */
+ __IO uint32_t PIO1_2; /*!< (@ 0x40044068) I/O configuration for pin PIO1_2/CT32B1_MAT2 */
+ __IO uint32_t PIO1_3; /*!< (@ 0x4004406C) I/O configuration for pin PIO1_3/CT32B1_MAT3 */
+ __IO uint32_t PIO1_4; /*!< (@ 0x40044070) I/O configuration for pin PIO1_4/CT32B1_CAP0 */
+ __IO uint32_t PIO1_5; /*!< (@ 0x40044074) I/O configuration for pin PIO1_5/CT32B1_CAP1 */
+ __IO uint32_t PIO1_6; /*!< (@ 0x40044078) I/O configuration for pin PIO1_6 */
+ __IO uint32_t PIO1_7; /*!< (@ 0x4004407C) I/O configuration for pin PIO1_7 */
+ __IO uint32_t PIO1_8; /*!< (@ 0x40044080) I/O configuration for pin PIO1_8 */
+ __IO uint32_t PIO1_9; /*!< (@ 0x40044084) I/O configuration for pin PIO1_9 */
+ __IO uint32_t PIO1_10; /*!< (@ 0x40044088) I/O configuration for pin PIO1_10 */
+ __IO uint32_t PIO1_11; /*!< (@ 0x4004408C) I/O configuration for pin PIO1_11 */
+ __IO uint32_t PIO1_12; /*!< (@ 0x40044090) I/O configuration for pin PIO1_12 */
+ __IO uint32_t PIO1_13; /*!< (@ 0x40044094) I/O configuration for PIO1_13/DTR/CT16B0_MAT0/TXD */
+ __IO uint32_t PIO1_14; /*!< (@ 0x40044098) I/O configuration for PIO1_14/DSR/CT16B0_MAT1/RXD */
+ __IO uint32_t PIO1_15; /*!< (@ 0x4004409C) I/O configuration for pin PIO1_15/DCD/ CT16B0_MAT2/SCK1 */
+ __IO uint32_t PIO1_16; /*!< (@ 0x400440A0) I/O configuration for pin PIO1_16/RI/CT16B0_CAP0 */
+ __IO uint32_t PIO1_17; /*!< (@ 0x400440A4) I/O configuration for PIO1_17/CT16B0_CAP1/RXD */
+ __IO uint32_t PIO1_18; /*!< (@ 0x400440A8) I/O configuration for PIO1_18/CT16B1_CAP1/TXD */
+ __IO uint32_t PIO1_19; /*!< (@ 0x400440AC) I/O configuration for pin PIO1_19/DTR/SSEL1 */
+ __IO uint32_t PIO1_20; /*!< (@ 0x400440B0) I/O configuration for pin PIO1_20/DSR/SCK1 */
+ __IO uint32_t PIO1_21; /*!< (@ 0x400440B4) I/O configuration for pin PIO1_21/DCD/MISO1 */
+ __IO uint32_t PIO1_22; /*!< (@ 0x400440B8) I/O configuration for pin PIO1_22/RI/MOSI1 */
+ __IO uint32_t PIO1_23; /*!< (@ 0x400440BC) I/O configuration for pin PIO1_23/CT16B1_MAT1/SSEL1 */
+ __IO uint32_t PIO1_24; /*!< (@ 0x400440C0) I/O configuration for pin PIO1_24/ CT32B0_MAT0 */
+ __IO uint32_t PIO1_25; /*!< (@ 0x400440C4) I/O configuration for pin PIO1_25/CT32B0_MAT1 */
+ __IO uint32_t PIO1_26; /*!< (@ 0x400440C8) I/O configuration for pin PIO1_26/CT32B0_MAT2/ RXD */
+ __IO uint32_t PIO1_27; /*!< (@ 0x400440CC) I/O configuration for pin PIO1_27/CT32B0_MAT3/ TXD */
+ __IO uint32_t PIO1_28; /*!< (@ 0x400440D0) I/O configuration for pin PIO1_28/CT32B0_CAP0/ SCLK */
+ __IO uint32_t PIO1_29; /*!< (@ 0x400440D4) I/O configuration for pin PIO1_29/SCK0/ CT32B0_CAP1 */
+ __IO uint32_t PIO1_30; /*!< (@ 0x400440D8) I/O configuration for pin PIO1_30 */
+ __IO uint32_t PIO1_31; /*!< (@ 0x400440DC) I/O configuration for pin PIO1_31 */
+} LPC_IOCON_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- SYSCON -----
+// ------------------------------------------------------------------------------------------------
+
+typedef struct { /*!< (@ 0x40048000) SYSCON Structure */
+ __IO uint32_t SYSMEMREMAP; /*!< (@ 0x40048000) System memory remap */
+ __IO uint32_t PRESETCTRL; /*!< (@ 0x40048004) Peripheral reset control */
+ __IO uint32_t SYSPLLCTRL; /*!< (@ 0x40048008) System PLL control */
+ __I uint32_t SYSPLLSTAT; /*!< (@ 0x4004800C) System PLL status */
+ __IO uint32_t USBPLLCTRL; /*!< (@ 0x40048010) USB PLL control */
+ __I uint32_t USBPLLSTAT; /*!< (@ 0x40048014) USB PLL status */
+ __I uint32_t RESERVED0[2];
+ __IO uint32_t SYSOSCCTRL; /*!< (@ 0x40048020) System oscillator control */
+ __IO uint32_t WDTOSCCTRL; /*!< (@ 0x40048024) Watchdog oscillator control */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t SYSRSTSTAT; /*!< (@ 0x40048030) System reset status register */
+ __I uint32_t RESERVED2[3];
+ __IO uint32_t SYSPLLCLKSEL; /*!< (@ 0x40048040) System PLL clock source select */
+ __I uint32_t RESERVED3;
+ __IO uint32_t USBPLLCLKSEL; /*!< (@ 0x40048048) USB PLL clock source select */
+ __I uint32_t RESERVED4[9];
+ __IO uint32_t MAINCLKSEL; /*!< (@ 0x40048070) Main clock source select */
+ __I uint32_t RESERVED5;
+ __IO uint32_t SYSAHBCLKDIV; /*!< (@ 0x40048078) System clock divider */
+ __I uint32_t RESERVED6;
+ __IO uint32_t SYSAHBCLKCTRL; /*!< (@ 0x40048080) System clock control */
+ __I uint32_t RESERVED7[4];
+ __IO uint32_t SSP0CLKDIV; /*!< (@ 0x40048094) SSP0 clock divider */
+ __IO uint32_t UARTCLKDIV; /*!< (@ 0x40048098) UART clock divider */
+ __IO uint32_t SSP1CLKDIV; /*!< (@ 0x4004809C) SSP1 clock divider */
+ __I uint32_t RESERVED8[3];
+ __IO uint32_t TRACECLKDIV; /*!< (@ 0x400480AC) ARM trace clock divider */
+ __IO uint32_t SYSTICKCLKDIV; /*!< (@ 0x400480B0) SYSTICK clock divder */
+ __I uint32_t RESERVED9[3];
+ __IO uint32_t USBCLKSEL; /*!< (@ 0x400480C0) USB clock source select */
+ __I uint32_t RESERVED10;
+ __IO uint32_t USBCLKDIV; /*!< (@ 0x400480C8) USB clock source divider */
+ __I uint32_t RESERVED11[5];
+ __IO uint32_t CLKOUTSEL; /*!< (@ 0x400480E0) CLKOUT clock source select */
+ __I uint32_t RESERVED12;
+ __IO uint32_t CLKOUTDIV; /*!< (@ 0x400480E8) CLKOUT clock divider */
+ __I uint32_t RESERVED13[5];
+ __I uint32_t PIOPORCAP0; /*!< (@ 0x40048100) POR captured PIO status 0 */
+ __I uint32_t PIOPORCAP1; /*!< (@ 0x40048104) POR captured PIO status 1 */
+ __I uint32_t RESERVED14[18];
+ __IO uint32_t BODCTRL; /*!< (@ 0x40048150) Brown-Out Detect */
+ __IO uint32_t SYSTCKCAL; /*!< (@ 0x40048154) System tick counter calibration */
+ __I uint32_t RESERVED15[6];
+ __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IQR delay. Allows trade-off between interrupt latency and determinism. */
+ __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */
+ __IO uint32_t PINSEL[8]; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register */
+ __IO uint32_t USBCLKCTRL; /*!< (@ 0x40048198) USB clock control */
+ __I uint32_t USBCLKST; /*!< (@ 0x4004819C) USB clock status */
+ __I uint32_t RESERVED16[25];
+ __IO uint32_t STARTERP0; /*!< (@ 0x40048204) Start logic 0 interrupt wake-up enable register 0 */
+ __I uint32_t RESERVED17[3];
+ __IO uint32_t STARTERP1; /*!< (@ 0x40048214) Start logic 1 interrupt wake-up enable register 1 */
+ __I uint32_t RESERVED18[6];
+ __IO uint32_t PDSLEEPCFG; /*!< (@ 0x40048230) Power-down states in deep-sleep mode */
+ __IO uint32_t PDAWAKECFG; /*!< (@ 0x40048234) Power-down states for wake-up from deep-sleep */
+ __IO uint32_t PDRUNCFG; /*!< (@ 0x40048238) Power configuration register */
+ __I uint32_t RESERVED19[111];
+ __I uint32_t DEVICE_ID; /*!< (@ 0x400483F8) Device ID */
+} LPC_SYSCON_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_PIN_INT -----
+// ------------------------------------------------------------------------------------------------
+typedef struct { /*!< (@ 0x4004C000) GPIO_PIN_INT Structure */
+ __IO uint32_t ISEL; /*!< (@ 0x4004C000) Pin Interrupt Mode register */
+ __IO uint32_t IENR; /*!< (@ 0x4004C004) Pin Interrupt Enable (Rising) register */
+ __O uint32_t SIENR; /*!< (@ 0x4004C008) Set Pin Interrupt Enable (Rising) register */
+ __O uint32_t CIENR; /*!< (@ 0x4004C00C) Clear Pin Interrupt Enable (Rising) register */
+ __IO uint32_t IENF; /*!< (@ 0x4004C010) Pin Interrupt Enable Falling Edge / Active Level register */
+ __O uint32_t SIENF; /*!< (@ 0x4004C014) Set Pin Interrupt Enable Falling Edge / Active Level register */
+ __O uint32_t CIENF; /*!< (@ 0x4004C018) Clear Pin Interrupt Enable Falling Edge / Active Level address */
+ __IO uint32_t RISE; /*!< (@ 0x4004C01C) Pin Interrupt Rising Edge register */
+ __IO uint32_t FALL; /*!< (@ 0x4004C020) Pin Interrupt Falling Edge register */
+ __IO uint32_t IST; /*!< (@ 0x4004C024) Pin Interrupt Status register */
+} LPC_GPIO_PIN_INT_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- SSP1 -----
+// ------------------------------------------------------------------------------------------------
+typedef struct { /*!< (@ 0x40058000) SSP1 Structure */
+ __IO uint32_t CR0; /*!< (@ 0x40058000) Control Register 0. Selects the serial clock rate, bus type, and data size. */
+ __IO uint32_t CR1; /*!< (@ 0x40058004) Control Register 1. Selects master/slave and other modes. */
+ __IO uint32_t DR; /*!< (@ 0x40058008) Data Register. Writes fill the transmit FIFO, and reads empty the receive FIFO. */
+ __I uint32_t SR; /*!< (@ 0x4005800C) Status Register */
+ __IO uint32_t CPSR; /*!< (@ 0x40058010) Clock Prescale Register */
+ __IO uint32_t IMSC; /*!< (@ 0x40058014) Interrupt Mask Set and Clear Register */
+ __I uint32_t RIS; /*!< (@ 0x40058018) Raw Interrupt Status Register */
+ __I uint32_t MIS; /*!< (@ 0x4005801C) Masked Interrupt Status Register */
+ __O uint32_t ICR; /*!< (@ 0x40058020) SSPICR Interrupt Clear Register */
+} LPC_SSP1_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_GROUP_INT0 -----
+// ------------------------------------------------------------------------------------------------
+typedef struct { /*!< (@ 0x4005C000) GPIO_GROUP_INT0 Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x4005C000) GPIO grouped interrupt control register */
+ __I uint32_t RESERVED0[7];
+ __IO uint32_t PORT_POL[2]; /*!< (@ 0x4005C020) GPIO grouped interrupt port 0 polarity register */
+ __I uint32_t RESERVED1[6];
+ __IO uint32_t PORT_ENA[2]; /*!< (@ 0x4005C040) GPIO grouped interrupt port 0/1 enable register */
+} LPC_GPIO_GROUP_INT0_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_GROUP_INT1 -----
+// ------------------------------------------------------------------------------------------------
+
+typedef struct { /*!< (@ 0x40060000) GPIO_GROUP_INT1 Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x40060000) GPIO grouped interrupt control register */
+ __I uint32_t RESERVED0[7];
+ __IO uint32_t PORT_POL[2]; /*!< (@ 0x40060020) GPIO grouped interrupt port 0 polarity register */
+ __I uint32_t RESERVED1[6];
+ __IO uint32_t PORT_ENA[2]; /*!< (@ 0x40060040) GPIO grouped interrupt port 0/1 enable register */
+} LPC_GPIO_GROUP_INT1_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- Repetitive Interrupt Timer (RIT) -----
+// ------------------------------------------------------------------------------------------------
+
+typedef struct { /*!< (@ 0x40064000) RITIMER Structure */
+ __IO uint32_t COMPVAL; /*!< (@ 0x40064000) RITIMER compare register */
+ __IO uint32_t MASK; /*!< (@ 0x40064004) RITIMER mask register */
+ __IO uint32_t CTRL; /*!< (@ 0x40064008) RITIMER control register */
+ __IO uint32_t COUNTER; /*!< (@ 0x4006400C) RITIMER counter register */
+ __IO uint32_t COMPVAL_H; /*!< (@ 0x40064010) RITIMER compare upper register */
+ __IO uint32_t MASK_H; /*!< (@ 0x40064014) RITIMER mask upper register */
+ __I uint32_t RESERVED0[1];
+ __IO uint32_t COUNTER_H; /*!< (@ 0x4006401C) RITIMER counter upper register */
+} LPC_RITIMER_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- USB -----
+// ------------------------------------------------------------------------------------------------
+typedef struct { /*!< (@ 0x40020000) USB Structure */
+ __IO uint32_t DEVCMDSTAT; /*!< (@ 0x40020000) USB Device Command/Status register */
+ __IO uint32_t INFO; /*!< (@ 0x40020004) USB Info register */
+ __IO uint32_t EPLISTSTART; /*!< (@ 0x40020008) USB EP Command/Status List start address */
+ __IO uint32_t DATABUFSTART; /*!< (@ 0x4002000C) USB Data buffer start address */
+ __IO uint32_t LPM; /*!< (@ 0x40020010) Link Power Management register */
+ __IO uint32_t EPSKIP; /*!< (@ 0x40020014) USB Endpoint skip */
+ __IO uint32_t EPINUSE; /*!< (@ 0x40020018) USB Endpoint Buffer in use */
+ __IO uint32_t EPBUFCFG; /*!< (@ 0x4002001C) USB Endpoint Buffer Configuration register */
+ __IO uint32_t INTSTAT; /*!< (@ 0x40020020) USB interrupt status register */
+ __IO uint32_t INTEN; /*!< (@ 0x40020024) USB interrupt enable register */
+ __IO uint32_t INTSETSTAT; /*!< (@ 0x40020028) USB set interrupt status register */
+ __IO uint32_t INTROUTING; /*!< (@ 0x4002002C) USB interrupt routing register */
+ __I uint32_t RESERVED0[1];
+ __I uint32_t EPTOGGLE; /*!< (@ 0x40020034) USB Endpoint toggle register */
+} LPC_USB_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_PORT -----
+// ------------------------------------------------------------------------------------------------
+
+typedef struct { /*!< (@ 0x50000000) GPIO_PORT Structure */
+ union {
+ struct {
+ __IO uint8_t B0[32]; /*!< (@ 0x50000000) Byte pin registers port 0; pins PIO0_0 to PIO0_31 */
+ __IO uint8_t B1[32]; /*!< (@ 0x50000020) Byte pin registers port 1 */
+ };
+ __IO uint8_t B[64]; /*!< (@ 0x50000000) Byte pin registers port 0/1 */
+ };
+ __I uint32_t RESERVED0[1008];
+ union {
+ struct {
+ __IO uint32_t W0[32]; /*!< (@ 0x50001000) Word pin registers port 0 */
+ __IO uint32_t W1[32]; /*!< (@ 0x50001080) Word pin registers port 1 */
+ };
+ __IO uint32_t W[64]; /*!< (@ 0x50001000) Word pin registers port 0/1 */
+ };
+ __I uint32_t RESERVED1[960];
+ __IO uint32_t DIR[2]; /*!< (@ 0x50002000) Direction registers port 0/1 */
+ __I uint32_t RESERVED2[30];
+ __IO uint32_t MASK[2]; /*!< (@ 0x50002080) Mask register port 0/1 */
+ __I uint32_t RESERVED3[30];
+ __IO uint32_t PIN[2]; /*!< (@ 0x50002100) Portpin register port 0 */
+ __I uint32_t RESERVED4[30];
+ __IO uint32_t MPIN[2]; /*!< (@ 0x50002180) Masked port register port 0/1 */
+ __I uint32_t RESERVED5[30];
+ __IO uint32_t SET[2]; /*!< (@ 0x50002200) Write: Set register for port 0/1 Read: output bits for port 0/1 */
+ __I uint32_t RESERVED6[30];
+ __O uint32_t CLR[2]; /*!< (@ 0x50002280) Clear port 0/1 */
+ __I uint32_t RESERVED7[30];
+ __O uint32_t NOT[2]; /*!< (@ 0x50002300) Toggle port 0/1 */
+} LPC_GPIO_Type;
+
+
+#if defined ( __CC_ARM )
+ #pragma no_anon_unions
+#endif
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- Peripheral memory map -----
+// ------------------------------------------------------------------------------------------------
+
+#define LPC_I2C_BASE (0x40000000)
+#define LPC_WWDT_BASE (0x40004000)
+#define LPC_USART_BASE (0x40008000)
+#define LPC_CT16B0_BASE (0x4000C000)
+#define LPC_CT16B1_BASE (0x40010000)
+#define LPC_CT32B0_BASE (0x40014000)
+#define LPC_CT32B1_BASE (0x40018000)
+#define LPC_ADC_BASE (0x4001C000)
+#define LPC_PMU_BASE (0x40038000)
+#define LPC_FLASHCTRL_BASE (0x4003C000)
+#define LPC_SSP0_BASE (0x40040000)
+#define LPC_IOCON_BASE (0x40044000)
+#define LPC_SYSCON_BASE (0x40048000)
+#define LPC_GPIO_PIN_INT_BASE (0x4004C000)
+#define LPC_SSP1_BASE (0x40058000)
+#define LPC_GPIO_GROUP_INT0_BASE (0x4005C000)
+#define LPC_GPIO_GROUP_INT1_BASE (0x40060000)
+#define LPC_RITIMER_BASE (0x40064000)
+#define LPC_USB_BASE (0x40080000)
+#define LPC_GPIO_BASE (0x50000000)
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- Peripheral declaration -----
+// ------------------------------------------------------------------------------------------------
+
+#define LPC_I2C ((LPC_I2C_Type *) LPC_I2C_BASE)
+#define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE)
+#define LPC_USART ((LPC_USART_Type *) LPC_USART_BASE)
+#define LPC_CT16B0 ((LPC_CT16B0_Type *) LPC_CT16B0_BASE)
+#define LPC_CT16B1 ((LPC_CT16B1_Type *) LPC_CT16B1_BASE)
+#define LPC_CT32B0 ((LPC_CT32B0_Type *) LPC_CT32B0_BASE)
+#define LPC_CT32B1 ((LPC_CT32B1_Type *) LPC_CT32B1_BASE)
+#define LPC_ADC ((LPC_ADC_Type *) LPC_ADC_BASE)
+#define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE)
+#define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE)
+#define LPC_SSP0 ((LPC_SSP0_Type *) LPC_SSP0_BASE)
+#define LPC_SSP1 ((LPC_SSP1_Type *) LPC_SSP1_BASE)
+#define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE)
+#define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE)
+#define LPC_GPIO_PIN_INT ((LPC_GPIO_PIN_INT_Type *) LPC_GPIO_PIN_INT_BASE)
+#define LPC_GPIO_GROUP_INT0 ((LPC_GPIO_GROUP_INT0_Type*) LPC_GPIO_GROUP_INT0_BASE)
+#define LPC_GPIO_GROUP_INT1 ((LPC_GPIO_GROUP_INT1_Type*) LPC_GPIO_GROUP_INT1_BASE)
+#define LPC_RITIMER ((LPC_RITIMER_Type *) LPC_RITIMER_BASE)
+#define LPC_USB ((LPC_USB_Type *) LPC_USB_BASE)
+#define LPC_GPIO ((LPC_GPIO_Type *) LPC_GPIO_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group (null) */
+/** @} */ /* End of group h1usf */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif // __LPC13UXX_H__
diff --git a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/core_cm3.h b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/core_cm3.h
similarity index 57%
rename from mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/core_cm3.h
rename to mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/core_cm3.h
index 080bca40..122c9aa4 100644
--- a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/core_cm3.h
+++ b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/core_cm3.h
@@ -1,1236 +1,1627 @@
-/**************************************************************************//**
- * @file core_cm3.h
- * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
- * @version V2.10
- * @date 19. July 2011
- *
- * @note
- * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#endif
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#ifndef __CORE_CM3_H_GENERIC
-#define __CORE_CM3_H_GENERIC
-
-
-/** \mainpage CMSIS Cortex-M3
-
- This documentation describes the CMSIS Cortex-M Core Peripheral Access Layer.
- It consists of:
-
- - Cortex-M Core Register Definitions
- - Cortex-M functions
- - Cortex-M instructions
-
- The CMSIS Cortex-M3 Core Peripheral Access Layer contains C and assembly functions that ease
- access to the Cortex-M Core
- */
-
-/** \defgroup CMSIS_MISRA_Exceptions CMSIS MISRA-C:2004 Compliance Exceptions
- CMSIS violates following MISRA-C2004 Rules:
-
- - Violates MISRA 2004 Required Rule 8.5, object/function definition in header file.
- Function definitions in header files are used to allow 'inlining'.
-
- - Violates MISRA 2004 Required Rule 18.4, declaration of union type or object of union type: '{...}'.
- Unions are used for effective representation of core registers.
-
- - Violates MISRA 2004 Advisory Rule 19.7, Function-like macro defined.
- Function-like macros are used to allow more efficient code.
-
- */
-
-
-/*******************************************************************************
- * CMSIS definitions
- ******************************************************************************/
-/** \defgroup CMSIS_core_definitions CMSIS Core Definitions
- This file defines all structures and symbols for CMSIS core:
- - CMSIS version number
- - Cortex-M core
- - Cortex-M core Revision Number
- @{
- */
-
-/* CMSIS CM3 definitions */
-#define __CM3_CMSIS_VERSION_MAIN (0x02) /*!< [31:16] CMSIS HAL main version */
-#define __CM3_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
-#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x03) /*!< Cortex core */
-
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
-
-#endif
-
-/*!< __FPU_USED to be checked prior to making use of FPU specific registers and functions */
-#define __FPU_USED 0
-
-#if defined ( __CC_ARM )
- #if defined __TARGET_FPU_VFP
- #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-#elif defined ( __ICCARM__ )
- #if defined __ARMVFP__
- #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __GNUC__ )
- #if defined (__VFP_FP__) && !defined(__SOFTFP__)
- #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TASKING__ )
- /* add preprocessor checks */
-#endif
-
-#include /*!< standard types definitions */
-#include "core_cmInstr.h" /*!< Core Instruction Access */
-#include "core_cmFunc.h" /*!< Core Function Access */
-
-#endif /* __CORE_CM3_H_GENERIC */
-
-#ifndef __CMSIS_GENERIC
-
-#ifndef __CORE_CM3_H_DEPENDANT
-#define __CORE_CM3_H_DEPENDANT
-
-/* check device defines and use defaults */
-#if defined __CHECK_DEVICE_DEFINES
- #ifndef __CM3_REV
- #define __CM3_REV 0x0200
- #warning "__CM3_REV not defined in device header file; using default!"
- #endif
-
- #ifndef __MPU_PRESENT
- #define __MPU_PRESENT 0
- #warning "__MPU_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 4
- #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
- #endif
-
- #ifndef __Vendor_SysTickConfig
- #define __Vendor_SysTickConfig 0
- #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
- #endif
-#endif
-
-/* IO definitions (access restrictions to peripheral registers) */
-#ifdef __cplusplus
- #define __I volatile /*!< defines 'read only' permissions */
-#else
- #define __I volatile const /*!< defines 'read only' permissions */
-#endif
-#define __O volatile /*!< defines 'write only' permissions */
-#define __IO volatile /*!< defines 'read / write' permissions */
-
-/*@} end of group CMSIS_core_definitions */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- ******************************************************************************/
-/** \defgroup CMSIS_core_register CMSIS Core Register
- Core Register contain:
- - Core Register
- - Core NVIC Register
- - Core SCB Register
- - Core SysTick Register
- - Core Debug Register
- - Core MPU Register
-*/
-
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE CMSIS Core
- Type definitions for the Cortex-M Core Registers
- @{
- */
-
-/** \brief Union type to access the Application Program Status Register (APSR).
- */
-typedef union
-{
- struct
- {
-#if (__CORTEX_M != 0x04)
- uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
-#else
- uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
- uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
- uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
-#endif
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} APSR_Type;
-
-
-/** \brief Union type to access the Interrupt Program Status Register (IPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} IPSR_Type;
-
-
-/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
-#if (__CORTEX_M != 0x04)
- uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
-#else
- uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
- uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
- uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
-#endif
- uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
- uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} xPSR_Type;
-
-
-/** \brief Union type to access the Control Registers (CONTROL).
- */
-typedef union
-{
- struct
- {
- uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
- uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
- uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
- uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} CONTROL_Type;
-
-/*@} end of group CMSIS_CORE */
-
-
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC CMSIS NVIC
- Type definitions for the Cortex-M NVIC Registers
- @{
- */
-
-/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
- */
-typedef struct
-{
- __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
- uint32_t RESERVED0[24];
- __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
- uint32_t RSERVED1[24];
- __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
- uint32_t RESERVED2[24];
- __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
- uint32_t RESERVED3[24];
- __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
- uint32_t RESERVED4[56];
- __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
- uint32_t RESERVED5[644];
- __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
-} NVIC_Type;
-
-/* Software Triggered Interrupt Register Definitions */
-#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
-#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
-
-/*@} end of group CMSIS_NVIC */
-
-
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB CMSIS SCB
- Type definitions for the Cortex-M System Control Block Registers
- @{
- */
-
-/** \brief Structure type to access the System Control Block (SCB).
- */
-typedef struct
-{
- __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
- __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
- __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
- __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
- __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
- __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
- __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
- __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
- __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
- __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
- __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
- __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
- __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
- __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
- __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
- __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
- __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
- __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
- uint32_t RESERVED0[5];
- __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
-#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Vector Table Offset Register Definitions */
-#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
-#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
-#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
-#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
-
-#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
-#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
-#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
-
-#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
-#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
-#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
-
-#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
-#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
-
-#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
-#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
-
-#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
-#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
-
-#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
-#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
-
-#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
-#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
-
-#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
-#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
-
-#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
-#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
-
-#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
-#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
-
-#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
-#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
-
-#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
-#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
-
-#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
-#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
-
-#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
-#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
-
-/* SCB Configurable Fault Status Registers Definitions */
-#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
-#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
-
-#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
-#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
-
-#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
-#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
-
-/* SCB Hard Fault Status Registers Definitions */
-#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
-#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
-
-#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
-#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
-
-#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
-#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
-
-/*@} end of group CMSIS_SCB */
-
-
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SCnSCB CMSIS System Control and ID Register not in the SCB
- Type definitions for the Cortex-M System Control and ID Register not in the SCB
- @{
- */
-
-/** \brief Structure type to access the System Control and ID Register not in the SCB.
- */
-typedef struct
-{
- uint32_t RESERVED0[1];
- __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
-#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
- __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
-#else
- uint32_t RESERVED1[1];
-#endif
-} SCnSCB_Type;
-
-/* Interrupt Controller Type Register Definitions */
-#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
-#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
-
-/* Auxiliary Control Register Definitions */
-
-#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
-#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
-
-#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
-#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
-
-#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
-#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
-
-/*@} end of group CMSIS_SCnotSCB */
-
-
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick CMSIS SysTick
- Type definitions for the Cortex-M System Timer Registers
- @{
- */
-
-/** \brief Structure type to access the System Timer (SysTick).
- */
-typedef struct
-{
- __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
- __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
- __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
- __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
-
-/*@} end of group CMSIS_SysTick */
-
-
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_ITM CMSIS ITM
- Type definitions for the Cortex-M Instrumentation Trace Macrocell (ITM)
- @{
- */
-
-/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
- */
-typedef struct
-{
- __O union
- {
- __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
- __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
- __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
- } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
- uint32_t RESERVED0[864];
- __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
- uint32_t RESERVED1[15];
- __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
- uint32_t RESERVED2[15];
- __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
-} ITM_Type;
-
-/* ITM Trace Privilege Register Definitions */
-#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
-
-/* ITM Trace Control Register Definitions */
-#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
-#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
-
-#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
-#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
-
-#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
-#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
-
-#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
-#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
-
-#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
-#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
-
-#define ITM_TCR_TXENA_Pos 3 /*!< ITM TCR: TXENA Position */
-#define ITM_TCR_TXENA_Msk (1UL << ITM_TCR_TXENA_Pos) /*!< ITM TCR: TXENA Mask */
-
-#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
-#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
-
-#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
-#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
-
-#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
-#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
-
-/*@}*/ /* end of group CMSIS_ITM */
-
-
-#if (__MPU_PRESENT == 1)
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_MPU CMSIS MPU
- Type definitions for the Cortex-M Memory Protection Unit (MPU)
- @{
- */
-
-/** \brief Structure type to access the Memory Protection Unit (MPU).
- */
-typedef struct
-{
- __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
- __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
- __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
- __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
- __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
- __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
- __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
- __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
- __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
- __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
- __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register */
-#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register */
-#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register */
-#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register */
-#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register */
-#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
-#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
-
-#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@} end of group CMSIS_MPU */
-#endif
-
-
-/** \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug CMSIS Core Debug
- Type definitions for the Cortex-M Core Debug Registers
- @{
- */
-
-/** \brief Structure type to access the Core Debug Register (CoreDebug).
- */
-typedef struct
-{
- __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
- __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
- __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
- __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
-#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register */
-#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register */
-#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
-#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
-
-#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
-#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
-
-#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
-#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
-
-#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
-#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
-
-#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
-#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
-#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
-
-#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
-#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
-
-#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
-#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
-
-#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
-#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
-
-#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
-#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
-
-#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
-#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-
-/*@} end of group CMSIS_CoreDebug */
-
-
-/** \ingroup CMSIS_core_register
- @{
- */
-
-/* Memory mapping of Cortex-M3 Hardware */
-#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-
-#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
-#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
-#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-#if (__MPU_PRESENT == 1)
- #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
-#endif
-
-/*@} */
-
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- ******************************************************************************/
-/** \defgroup CMSIS_Core_FunctionInterface CMSIS Core Function Interface
- Core Function Interface contains:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Debug Functions
- - Core Register Access Functions
-*/
-
-
-
-/* ########################## NVIC functions #################################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions CMSIS Core NVIC Functions
- @{
- */
-
-/** \brief Set Priority Grouping
-
- This function sets the priority grouping field using the required unlock sequence.
- The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
- Only values from 0..7 are used.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
-
- \param [in] PriorityGroup Priority grouping field
- */
-static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- uint32_t reg_value;
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
-
- reg_value = SCB->AIRCR; /* read old register configuration */
- reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
- reg_value = (reg_value |
- ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
- SCB->AIRCR = reg_value;
-}
-
-
-/** \brief Get Priority Grouping
-
- This function gets the priority grouping from NVIC Interrupt Controller.
- Priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
-
- \return Priority grouping field
- */
-static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
-{
- return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
-}
-
-
-/** \brief Enable External Interrupt
-
- This function enables a device specific interrupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
-
- \param [in] IRQn Number of the external interrupt to enable
- */
-static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
-}
-
-
-/** \brief Disable External Interrupt
-
- This function disables a device specific interrupt in the NVIC interrupt controller.
- The interrupt number cannot be a negative value.
-
- \param [in] IRQn Number of the external interrupt to disable
- */
-static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
-}
-
-
-/** \brief Get Pending Interrupt
-
- This function reads the pending register in the NVIC and returns the pending bit
- for the specified interrupt.
-
- \param [in] IRQn Number of the interrupt for get pending
- \return 0 Interrupt status is not pending
- \return 1 Interrupt status is pending
- */
-static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
-}
-
-
-/** \brief Set Pending Interrupt
-
- This function sets the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
-
- \param [in] IRQn Number of the interrupt for set pending
- */
-static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
-}
-
-
-/** \brief Clear Pending Interrupt
-
- This function clears the pending bit for the specified interrupt.
- The interrupt number cannot be a negative value.
-
- \param [in] IRQn Number of the interrupt for clear pending
- */
-static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
-}
-
-
-/** \brief Get Active Interrupt
-
- This function reads the active register in NVIC and returns the active bit.
- \param [in] IRQn Number of the interrupt for get active
- \return 0 Interrupt status is not active
- \return 1 Interrupt status is active
- */
-static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
-{
- return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
-}
-
-
-/** \brief Set Interrupt Priority
-
- This function sets the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
- interrupt, or negative to specify an internal (core) interrupt.
-
- Note: The priority cannot be set for every core interrupt.
-
- \param [in] IRQn Number of the interrupt for set priority
- \param [in] priority Priority to set
- */
-static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if(IRQn < 0) {
- SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
- else {
- NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
-}
-
-
-/** \brief Get Interrupt Priority
-
- This function reads the priority for the specified interrupt. The interrupt
- number can be positive to specify an external (device specific)
- interrupt, or negative to specify an internal (core) interrupt.
-
- The returned priority value is automatically aligned to the implemented
- priority bits of the microcontroller.
-
- \param [in] IRQn Number of the interrupt for get priority
- \return Interrupt Priority
- */
-static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if(IRQn < 0) {
- return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
- else {
- return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
-}
-
-
-/** \brief Encode Priority
-
- This function encodes the priority for an interrupt with the given priority group,
- preemptive priority value and sub priority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
-
- The returned priority value can be used for NVIC_SetPriority(...) function
-
- \param [in] PriorityGroup Used priority group
- \param [in] PreemptPriority Preemptive priority value (starting from 0)
- \param [in] SubPriority Sub priority value (starting from 0)
- \return Encoded priority for the interrupt
- */
-static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
- SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
-
- return (
- ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
- ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
- );
-}
-
-
-/** \brief Decode Priority
-
- This function decodes an interrupt priority value with the given priority group to
- preemptive priority value and sub priority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
-
- The priority value can be retrieved with NVIC_GetPriority(...) function
-
- \param [in] Priority Priority value
- \param [in] PriorityGroup Used priority group
- \param [out] pPreemptPriority Preemptive priority value (starting from 0)
- \param [out] pSubPriority Sub priority value (starting from 0)
- */
-static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
- SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
-
- *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
- *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
-}
-
-
-/** \brief System Reset
-
- This function initiate a system reset request to reset the MCU.
- */
-static __INLINE void NVIC_SystemReset(void)
-{
- __DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
- (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
- SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
- __DSB(); /* Ensure completion of memory access */
- while(1); /* wait until reset */
-}
-
-/*@} end of CMSIS_Core_NVICFunctions */
-
-
-
-/* ################################## SysTick function ############################################ */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions CMSIS Core SysTick Functions
- @{
- */
-
-#if (__Vendor_SysTickConfig == 0)
-
-/** \brief System Tick Configuration
-
- This function initialises the system tick timer and its interrupt and start the system tick timer.
- Counter is in free running mode to generate periodical interrupts.
-
- \param [in] ticks Number of ticks between two interrupts
- \return 0 Function succeeded
- \return 1 Function failed
- */
-static __INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
-
- SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
- SysTick->VAL = 0; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0); /* Function successful */
-}
-
-#endif
-
-/*@} end of CMSIS_Core_SysTickFunctions */
-
-
-
-/* ##################################### Debug In/Output function ########################################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_core_DebugFunctions CMSIS Core Debug Functions
- @{
- */
-
-extern volatile int32_t ITM_RxBuffer; /*!< external variable to receive characters */
-#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
-
-
-/** \brief ITM Send Character
-
- This function transmits a character via the ITM channel 0.
- It just returns when no debugger is connected that has booked the output.
- It is blocking when a debugger is connected, but the previous character send is not transmitted.
-
- \param [in] ch Character to transmit
- \return Character to transmit
- */
-static __INLINE uint32_t ITM_SendChar (uint32_t ch)
-{
- if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */
- (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
- (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
- {
- while (ITM->PORT[0].u32 == 0);
- ITM->PORT[0].u8 = (uint8_t) ch;
- }
- return (ch);
-}
-
-
-/** \brief ITM Receive Character
-
- This function inputs a character via external variable ITM_RxBuffer.
- It just returns when no debugger is connected that has booked the output.
- It is blocking when a debugger is connected, but the previous character send is not transmitted.
-
- \return Received character
- \return -1 No character received
- */
-static __INLINE int32_t ITM_ReceiveChar (void) {
- int32_t ch = -1; /* no character available */
-
- if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
- ch = ITM_RxBuffer;
- ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
- }
-
- return (ch);
-}
-
-
-/** \brief ITM Check Character
-
- This function checks external variable ITM_RxBuffer whether a character is available or not.
- It returns '1' if a character is available and '0' if no character is available.
-
- \return 0 No character available
- \return 1 Character available
- */
-static __INLINE int32_t ITM_CheckChar (void) {
-
- if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
- return (0); /* no character available */
- } else {
- return (1); /* character available */
- }
-}
-
-/*@} end of CMSIS_core_DebugFunctions */
-
-#endif /* __CORE_CM3_H_DEPENDANT */
-
-#endif /* __CMSIS_GENERIC */
-
-#ifdef __cplusplus
-}
-#endif
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include /* standard types definitions */
+#include /* Core Instruction Access */
+#include /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/core_cmFunc.h b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/core_cmFunc.h
similarity index 69%
rename from mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/core_cmFunc.h
rename to mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/core_cmFunc.h
index 915c795d..0a18fafc 100644
--- a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/core_cmFunc.h
+++ b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/core_cmFunc.h
@@ -1,609 +1,636 @@
-/**************************************************************************//**
- * @file core_cmFunc.h
- * @brief CMSIS Cortex-M Core Function Access Header File
- * @version V2.10
- * @date 26. July 2011
- *
- * @note
- * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-#ifndef __CORE_CMFUNC_H
-#define __CORE_CMFUNC_H
-
-
-/* ########################### Core Function Access ########################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
- @{
- */
-
-#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
-/* ARM armcc specific functions */
-
-#if (__ARMCC_VERSION < 400677)
- #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
-#endif
-
-/* intrinsic void __enable_irq(); */
-/* intrinsic void __disable_irq(); */
-
-/** \brief Get Control Register
-
- This function returns the content of the Control Register.
-
- \return Control Register value
- */
-static __INLINE uint32_t __get_CONTROL(void)
-{
- register uint32_t __regControl __ASM("control");
- return(__regControl);
-}
-
-
-/** \brief Set Control Register
-
- This function writes the given value to the Control Register.
-
- \param [in] control Control Register value to set
- */
-static __INLINE void __set_CONTROL(uint32_t control)
-{
- register uint32_t __regControl __ASM("control");
- __regControl = control;
-}
-
-
-/** \brief Get ISPR Register
-
- This function returns the content of the ISPR Register.
-
- \return ISPR Register value
- */
-static __INLINE uint32_t __get_IPSR(void)
-{
- register uint32_t __regIPSR __ASM("ipsr");
- return(__regIPSR);
-}
-
-
-/** \brief Get APSR Register
-
- This function returns the content of the APSR Register.
-
- \return APSR Register value
- */
-static __INLINE uint32_t __get_APSR(void)
-{
- register uint32_t __regAPSR __ASM("apsr");
- return(__regAPSR);
-}
-
-
-/** \brief Get xPSR Register
-
- This function returns the content of the xPSR Register.
-
- \return xPSR Register value
- */
-static __INLINE uint32_t __get_xPSR(void)
-{
- register uint32_t __regXPSR __ASM("xpsr");
- return(__regXPSR);
-}
-
-
-/** \brief Get Process Stack Pointer
-
- This function returns the current value of the Process Stack Pointer (PSP).
-
- \return PSP Register value
- */
-static __INLINE uint32_t __get_PSP(void)
-{
- register uint32_t __regProcessStackPointer __ASM("psp");
- return(__regProcessStackPointer);
-}
-
-
-/** \brief Set Process Stack Pointer
-
- This function assigns the given value to the Process Stack Pointer (PSP).
-
- \param [in] topOfProcStack Process Stack Pointer value to set
- */
-static __INLINE void __set_PSP(uint32_t topOfProcStack)
-{
- register uint32_t __regProcessStackPointer __ASM("psp");
- __regProcessStackPointer = topOfProcStack;
-}
-
-
-/** \brief Get Main Stack Pointer
-
- This function returns the current value of the Main Stack Pointer (MSP).
-
- \return MSP Register value
- */
-static __INLINE uint32_t __get_MSP(void)
-{
- register uint32_t __regMainStackPointer __ASM("msp");
- return(__regMainStackPointer);
-}
-
-
-/** \brief Set Main Stack Pointer
-
- This function assigns the given value to the Main Stack Pointer (MSP).
-
- \param [in] topOfMainStack Main Stack Pointer value to set
- */
-static __INLINE void __set_MSP(uint32_t topOfMainStack)
-{
- register uint32_t __regMainStackPointer __ASM("msp");
- __regMainStackPointer = topOfMainStack;
-}
-
-
-/** \brief Get Priority Mask
-
- This function returns the current state of the priority mask bit from the Priority Mask Register.
-
- \return Priority Mask value
- */
-static __INLINE uint32_t __get_PRIMASK(void)
-{
- register uint32_t __regPriMask __ASM("primask");
- return(__regPriMask);
-}
-
-
-/** \brief Set Priority Mask
-
- This function assigns the given value to the Priority Mask Register.
-
- \param [in] priMask Priority Mask
- */
-static __INLINE void __set_PRIMASK(uint32_t priMask)
-{
- register uint32_t __regPriMask __ASM("primask");
- __regPriMask = (priMask);
-}
-
-
-#if (__CORTEX_M >= 0x03)
-
-/** \brief Enable FIQ
-
- This function enables FIQ interrupts by clearing the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-#define __enable_fault_irq __enable_fiq
-
-
-/** \brief Disable FIQ
-
- This function disables FIQ interrupts by setting the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-#define __disable_fault_irq __disable_fiq
-
-
-/** \brief Get Base Priority
-
- This function returns the current value of the Base Priority register.
-
- \return Base Priority register value
- */
-static __INLINE uint32_t __get_BASEPRI(void)
-{
- register uint32_t __regBasePri __ASM("basepri");
- return(__regBasePri);
-}
-
-
-/** \brief Set Base Priority
-
- This function assigns the given value to the Base Priority register.
-
- \param [in] basePri Base Priority value to set
- */
-static __INLINE void __set_BASEPRI(uint32_t basePri)
-{
- register uint32_t __regBasePri __ASM("basepri");
- __regBasePri = (basePri & 0xff);
-}
-
-
-/** \brief Get Fault Mask
-
- This function returns the current value of the Fault Mask register.
-
- \return Fault Mask register value
- */
-static __INLINE uint32_t __get_FAULTMASK(void)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- return(__regFaultMask);
-}
-
-
-/** \brief Set Fault Mask
-
- This function assigns the given value to the Fault Mask register.
-
- \param [in] faultMask Fault Mask value to set
- */
-static __INLINE void __set_FAULTMASK(uint32_t faultMask)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- __regFaultMask = (faultMask & (uint32_t)1);
-}
-
-#endif /* (__CORTEX_M >= 0x03) */
-
-
-#if (__CORTEX_M == 0x04)
-
-/** \brief Get FPSCR
-
- This function returns the current value of the Floating Point Status/Control register.
-
- \return Floating Point Status/Control register value
- */
-static __INLINE uint32_t __get_FPSCR(void)
-{
-#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
- register uint32_t __regfpscr __ASM("fpscr");
- return(__regfpscr);
-#else
- return(0);
-#endif
-}
-
-
-/** \brief Set FPSCR
-
- This function assigns the given value to the Floating Point Status/Control register.
-
- \param [in] fpscr Floating Point Status/Control value to set
- */
-static __INLINE void __set_FPSCR(uint32_t fpscr)
-{
-#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
- register uint32_t __regfpscr __ASM("fpscr");
- __regfpscr = (fpscr);
-#endif
-}
-
-#endif /* (__CORTEX_M == 0x04) */
-
-
-#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
-/* IAR iccarm specific functions */
-
-#include
-
-#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
-/* GNU gcc specific functions */
-
-/** \brief Enable IRQ Interrupts
-
- This function enables IRQ interrupts by clearing the I-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __enable_irq(void)
-{
- __ASM volatile ("cpsie i");
-}
-
-
-/** \brief Disable IRQ Interrupts
-
- This function disables IRQ interrupts by setting the I-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __disable_irq(void)
-{
- __ASM volatile ("cpsid i");
-}
-
-
-/** \brief Get Control Register
-
- This function returns the content of the Control Register.
-
- \return Control Register value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_CONTROL(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, control" : "=r" (result) );
- return(result);
-}
-
-
-/** \brief Set Control Register
-
- This function writes the given value to the Control Register.
-
- \param [in] control Control Register value to set
- */
-__attribute__( ( always_inline ) ) static __INLINE void __set_CONTROL(uint32_t control)
-{
- __ASM volatile ("MSR control, %0" : : "r" (control) );
-}
-
-
-/** \brief Get ISPR Register
-
- This function returns the content of the ISPR Register.
-
- \return ISPR Register value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_IPSR(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
- return(result);
-}
-
-
-/** \brief Get APSR Register
-
- This function returns the content of the APSR Register.
-
- \return APSR Register value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_APSR(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, apsr" : "=r" (result) );
- return(result);
-}
-
-
-/** \brief Get xPSR Register
-
- This function returns the content of the xPSR Register.
-
- \return xPSR Register value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_xPSR(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
- return(result);
-}
-
-
-/** \brief Get Process Stack Pointer
-
- This function returns the current value of the Process Stack Pointer (PSP).
-
- \return PSP Register value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_PSP(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
- return(result);
-}
-
-
-/** \brief Set Process Stack Pointer
-
- This function assigns the given value to the Process Stack Pointer (PSP).
-
- \param [in] topOfProcStack Process Stack Pointer value to set
- */
-__attribute__( ( always_inline ) ) static __INLINE void __set_PSP(uint32_t topOfProcStack)
-{
- __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) );
-}
-
-
-/** \brief Get Main Stack Pointer
-
- This function returns the current value of the Main Stack Pointer (MSP).
-
- \return MSP Register value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_MSP(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
- return(result);
-}
-
-
-/** \brief Set Main Stack Pointer
-
- This function assigns the given value to the Main Stack Pointer (MSP).
-
- \param [in] topOfMainStack Main Stack Pointer value to set
- */
-__attribute__( ( always_inline ) ) static __INLINE void __set_MSP(uint32_t topOfMainStack)
-{
- __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) );
-}
-
-
-/** \brief Get Priority Mask
-
- This function returns the current state of the priority mask bit from the Priority Mask Register.
-
- \return Priority Mask value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_PRIMASK(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, primask" : "=r" (result) );
- return(result);
-}
-
-
-/** \brief Set Priority Mask
-
- This function assigns the given value to the Priority Mask Register.
-
- \param [in] priMask Priority Mask
- */
-__attribute__( ( always_inline ) ) static __INLINE void __set_PRIMASK(uint32_t priMask)
-{
- __ASM volatile ("MSR primask, %0" : : "r" (priMask) );
-}
-
-
-#if (__CORTEX_M >= 0x03)
-
-/** \brief Enable FIQ
-
- This function enables FIQ interrupts by clearing the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __enable_fault_irq(void)
-{
- __ASM volatile ("cpsie f");
-}
-
-
-/** \brief Disable FIQ
-
- This function disables FIQ interrupts by setting the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __disable_fault_irq(void)
-{
- __ASM volatile ("cpsid f");
-}
-
-
-/** \brief Get Base Priority
-
- This function returns the current value of the Base Priority register.
-
- \return Base Priority register value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_BASEPRI(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
- return(result);
-}
-
-
-/** \brief Set Base Priority
-
- This function assigns the given value to the Base Priority register.
-
- \param [in] basePri Base Priority value to set
- */
-__attribute__( ( always_inline ) ) static __INLINE void __set_BASEPRI(uint32_t value)
-{
- __ASM volatile ("MSR basepri, %0" : : "r" (value) );
-}
-
-
-/** \brief Get Fault Mask
-
- This function returns the current value of the Fault Mask register.
-
- \return Fault Mask register value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_FAULTMASK(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
- return(result);
-}
-
-
-/** \brief Set Fault Mask
-
- This function assigns the given value to the Fault Mask register.
-
- \param [in] faultMask Fault Mask value to set
- */
-__attribute__( ( always_inline ) ) static __INLINE void __set_FAULTMASK(uint32_t faultMask)
-{
- __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) );
-}
-
-#endif /* (__CORTEX_M >= 0x03) */
-
-
-#if (__CORTEX_M == 0x04)
-
-/** \brief Get FPSCR
-
- This function returns the current value of the Floating Point Status/Control register.
-
- \return Floating Point Status/Control register value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __get_FPSCR(void)
-{
-#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
- uint32_t result;
-
- __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
- return(result);
-#else
- return(0);
-#endif
-}
-
-
-/** \brief Set FPSCR
-
- This function assigns the given value to the Floating Point Status/Control register.
-
- \param [in] fpscr Floating Point Status/Control value to set
- */
-__attribute__( ( always_inline ) ) static __INLINE void __set_FPSCR(uint32_t fpscr)
-{
-#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
- __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) );
-#endif
-}
-
-#endif /* (__CORTEX_M == 0x04) */
-
-
-#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
-/* TASKING carm specific functions */
-
-/*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all instrinsics,
- * Including the CMSIS ones.
- */
-
-#endif
-
-/*@} end of CMSIS_Core_RegAccFunctions */
-
-
-#endif /* __CORE_CMFUNC_H */
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
diff --git a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/core_cmInstr.h b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/core_cmInstr.h
similarity index 64%
rename from mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/core_cmInstr.h
rename to mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/core_cmInstr.h
index 9f73e24f..d213f0ee 100644
--- a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/core_cmInstr.h
+++ b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/core_cmInstr.h
@@ -1,585 +1,688 @@
-/**************************************************************************//**
- * @file core_cmInstr.h
- * @brief CMSIS Cortex-M Core Instruction Access Header File
- * @version V2.10
- * @date 19. July 2011
- *
- * @note
- * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-#ifndef __CORE_CMINSTR_H
-#define __CORE_CMINSTR_H
-
-
-/* ########################## Core Instruction Access ######################### */
-/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
- Access to dedicated instructions
- @{
-*/
-
-#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
-/* ARM armcc specific functions */
-
-#if (__ARMCC_VERSION < 400677)
- #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
-#endif
-
-
-/** \brief No Operation
-
- No Operation does nothing. This instruction can be used for code alignment purposes.
- */
-#define __NOP __nop
-
-
-/** \brief Wait For Interrupt
-
- Wait For Interrupt is a hint instruction that suspends execution
- until one of a number of events occurs.
- */
-#define __WFI __wfi
-
-
-/** \brief Wait For Event
-
- Wait For Event is a hint instruction that permits the processor to enter
- a low-power state until one of a number of events occurs.
- */
-#define __WFE __wfe
-
-
-/** \brief Send Event
-
- Send Event is a hint instruction. It causes an event to be signaled to the CPU.
- */
-#define __SEV __sev
-
-
-/** \brief Instruction Synchronization Barrier
-
- Instruction Synchronization Barrier flushes the pipeline in the processor,
- so that all instructions following the ISB are fetched from cache or
- memory, after the instruction has been completed.
- */
-#define __ISB() __isb(0xF)
-
-
-/** \brief Data Synchronization Barrier
-
- This function acts as a special kind of Data Memory Barrier.
- It completes when all explicit memory accesses before this instruction complete.
- */
-#define __DSB() __dsb(0xF)
-
-
-/** \brief Data Memory Barrier
-
- This function ensures the apparent order of the explicit memory operations before
- and after the instruction, without ensuring their completion.
- */
-#define __DMB() __dmb(0xF)
-
-
-/** \brief Reverse byte order (32 bit)
-
- This function reverses the byte order in integer value.
-
- \param [in] value Value to reverse
- \return Reversed value
- */
-#define __REV __rev
-
-
-/** \brief Reverse byte order (16 bit)
-
- This function reverses the byte order in two unsigned short values.
-
- \param [in] value Value to reverse
- \return Reversed value
- */
-static __INLINE __ASM uint32_t __REV16(uint32_t value)
-{
- rev16 r0, r0
- bx lr
-}
-
-
-/** \brief Reverse byte order in signed short value
-
- This function reverses the byte order in a signed short value with sign extension to integer.
-
- \param [in] value Value to reverse
- \return Reversed value
- */
-static __INLINE __ASM int32_t __REVSH(int32_t value)
-{
- revsh r0, r0
- bx lr
-}
-
-
-#if (__CORTEX_M >= 0x03)
-
-/** \brief Reverse bit order of value
-
- This function reverses the bit order of the given value.
-
- \param [in] value Value to reverse
- \return Reversed value
- */
-#define __RBIT __rbit
-
-
-/** \brief LDR Exclusive (8 bit)
-
- This function performs a exclusive LDR command for 8 bit value.
-
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
-
-
-/** \brief LDR Exclusive (16 bit)
-
- This function performs a exclusive LDR command for 16 bit values.
-
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
-
-
-/** \brief LDR Exclusive (32 bit)
-
- This function performs a exclusive LDR command for 32 bit values.
-
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
-
-
-/** \brief STR Exclusive (8 bit)
-
- This function performs a exclusive STR command for 8 bit values.
-
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#define __STREXB(value, ptr) __strex(value, ptr)
-
-
-/** \brief STR Exclusive (16 bit)
-
- This function performs a exclusive STR command for 16 bit values.
-
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#define __STREXH(value, ptr) __strex(value, ptr)
-
-
-/** \brief STR Exclusive (32 bit)
-
- This function performs a exclusive STR command for 32 bit values.
-
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#define __STREXW(value, ptr) __strex(value, ptr)
-
-
-/** \brief Remove the exclusive lock
-
- This function removes the exclusive lock which is created by LDREX.
-
- */
-#define __CLREX __clrex
-
-
-/** \brief Signed Saturate
-
- This function saturates a signed value.
-
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (1..32)
- \return Saturated value
- */
-#define __SSAT __ssat
-
-
-/** \brief Unsigned Saturate
-
- This function saturates an unsigned value.
-
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (0..31)
- \return Saturated value
- */
-#define __USAT __usat
-
-
-/** \brief Count leading zeros
-
- This function counts the number of leading zeros of a data value.
-
- \param [in] value Value to count the leading zeros
- \return number of leading zeros in value
- */
-#define __CLZ __clz
-
-#endif /* (__CORTEX_M >= 0x03) */
-
-
-
-#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
-/* IAR iccarm specific functions */
-
-#include
-
-
-#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
-/* GNU gcc specific functions */
-
-/** \brief No Operation
-
- No Operation does nothing. This instruction can be used for code alignment purposes.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __NOP(void)
-{
- __ASM volatile ("nop");
-}
-
-
-/** \brief Wait For Interrupt
-
- Wait For Interrupt is a hint instruction that suspends execution
- until one of a number of events occurs.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __WFI(void)
-{
- __ASM volatile ("wfi");
-}
-
-
-/** \brief Wait For Event
-
- Wait For Event is a hint instruction that permits the processor to enter
- a low-power state until one of a number of events occurs.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __WFE(void)
-{
- __ASM volatile ("wfe");
-}
-
-
-/** \brief Send Event
-
- Send Event is a hint instruction. It causes an event to be signaled to the CPU.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __SEV(void)
-{
- __ASM volatile ("sev");
-}
-
-
-/** \brief Instruction Synchronization Barrier
-
- Instruction Synchronization Barrier flushes the pipeline in the processor,
- so that all instructions following the ISB are fetched from cache or
- memory, after the instruction has been completed.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __ISB(void)
-{
- __ASM volatile ("isb");
-}
-
-
-/** \brief Data Synchronization Barrier
-
- This function acts as a special kind of Data Memory Barrier.
- It completes when all explicit memory accesses before this instruction complete.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __DSB(void)
-{
- __ASM volatile ("dsb");
-}
-
-
-/** \brief Data Memory Barrier
-
- This function ensures the apparent order of the explicit memory operations before
- and after the instruction, without ensuring their completion.
- */
-__attribute__( ( always_inline ) ) static __INLINE void __DMB(void)
-{
- __ASM volatile ("dmb");
-}
-
-
-/** \brief Reverse byte order (32 bit)
-
- This function reverses the byte order in integer value.
-
- \param [in] value Value to reverse
- \return Reversed value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __REV(uint32_t value)
-{
- uint32_t result;
-
- __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
- return(result);
-}
-
-
-/** \brief Reverse byte order (16 bit)
-
- This function reverses the byte order in two unsigned short values.
-
- \param [in] value Value to reverse
- \return Reversed value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __REV16(uint32_t value)
-{
- uint32_t result;
-
- __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
- return(result);
-}
-
-
-/** \brief Reverse byte order in signed short value
-
- This function reverses the byte order in a signed short value with sign extension to integer.
-
- \param [in] value Value to reverse
- \return Reversed value
- */
-__attribute__( ( always_inline ) ) static __INLINE int32_t __REVSH(int32_t value)
-{
- uint32_t result;
-
- __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
- return(result);
-}
-
-
-#if (__CORTEX_M >= 0x03)
-
-/** \brief Reverse bit order of value
-
- This function reverses the bit order of the given value.
-
- \param [in] value Value to reverse
- \return Reversed value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __RBIT(uint32_t value)
-{
- uint32_t result;
-
- __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
- return(result);
-}
-
-
-/** \brief LDR Exclusive (8 bit)
-
- This function performs a exclusive LDR command for 8 bit value.
-
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-__attribute__( ( always_inline ) ) static __INLINE uint8_t __LDREXB(volatile uint8_t *addr)
-{
- uint8_t result;
-
- __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) );
- return(result);
-}
-
-
-/** \brief LDR Exclusive (16 bit)
-
- This function performs a exclusive LDR command for 16 bit values.
-
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-__attribute__( ( always_inline ) ) static __INLINE uint16_t __LDREXH(volatile uint16_t *addr)
-{
- uint16_t result;
-
- __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) );
- return(result);
-}
-
-
-/** \brief LDR Exclusive (32 bit)
-
- This function performs a exclusive LDR command for 32 bit values.
-
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __LDREXW(volatile uint32_t *addr)
-{
- uint32_t result;
-
- __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) );
- return(result);
-}
-
-
-/** \brief STR Exclusive (8 bit)
-
- This function performs a exclusive STR command for 8 bit values.
-
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
-{
- uint32_t result;
-
- __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
- return(result);
-}
-
-
-/** \brief STR Exclusive (16 bit)
-
- This function performs a exclusive STR command for 16 bit values.
-
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
-{
- uint32_t result;
-
- __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
- return(result);
-}
-
-
-/** \brief STR Exclusive (32 bit)
-
- This function performs a exclusive STR command for 32 bit values.
-
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-__attribute__( ( always_inline ) ) static __INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
-{
- uint32_t result;
-
- __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
- return(result);
-}
-
-
-/** \brief Remove the exclusive lock
-
- This function removes the exclusive lock which is created by LDREX.
-
- */
-__attribute__( ( always_inline ) ) static __INLINE void __CLREX(void)
-{
- __ASM volatile ("clrex");
-}
-
-
-/** \brief Signed Saturate
-
- This function saturates a signed value.
-
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (1..32)
- \return Saturated value
- */
-#define __SSAT(ARG1,ARG2) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1); \
- __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-
-
-/** \brief Unsigned Saturate
-
- This function saturates an unsigned value.
-
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (0..31)
- \return Saturated value
- */
-#define __USAT(ARG1,ARG2) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1); \
- __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-
-
-/** \brief Count leading zeros
-
- This function counts the number of leading zeros of a data value.
-
- \param [in] value Value to count the leading zeros
- \return number of leading zeros in value
- */
-__attribute__( ( always_inline ) ) static __INLINE uint8_t __CLZ(uint32_t value)
-{
- uint8_t result;
-
- __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
- return(result);
-}
-
-#endif /* (__CORTEX_M >= 0x03) */
-
-
-
-
-#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
-/* TASKING carm specific functions */
-
-/*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all intrinsics,
- * Including the CMSIS ones.
- */
-
-#endif
-
-/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
-
-#endif /* __CORE_CMINSTR_H */
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff --git a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/power_api.h b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/power_api.h
similarity index 100%
rename from mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/power_api.h
rename to mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/power_api.h
diff --git a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/system_LPC13Uxx.h b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/system_LPC13Uxx.h
similarity index 91%
rename from mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/system_LPC13Uxx.h
rename to mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/system_LPC13Uxx.h
index 33c473f0..615a5e23 100644
--- a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/inc/system_LPC13Uxx.h
+++ b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/inc/system_LPC13Uxx.h
@@ -1,64 +1,64 @@
-/**************************************************************************//**
- * @file system_LPC13Uxx.h
- * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File
- * for the NXP LPC13Uxx Device Series
- * @version V1.10
- * @date 24. November 2010
- *
- * @note
- * Copyright (C) 2009-2010 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-
-#ifndef __SYSTEM_LPC13Uxx_H
-#define __SYSTEM_LPC13Uxx_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include
-
-extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
-
-
-/**
- * Initialize the system
- *
- * @param none
- * @return none
- *
- * @brief Setup the microcontroller system.
- * Initialize the System and update the SystemCoreClock variable.
- */
-extern void SystemInit (void);
-
-/**
- * Update SystemCoreClock variable
- *
- * @param none
- * @return none
- *
- * @brief Updates the SystemCoreClock with current core Clock
- * retrieved from cpu registers.
- */
-extern void SystemCoreClockUpdate (void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __SYSTEM_LPC13Uxx_H */
+/**************************************************************************//**
+ * @file system_LPC13Uxx.h
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File
+ * for the NXP LPC13Uxx Device Series
+ * @version V1.10
+ * @date 24. November 2010
+ *
+ * @note
+ * Copyright (C) 2009-2010 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#ifndef __SYSTEM_LPC13Uxx_H
+#define __SYSTEM_LPC13Uxx_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SYSTEM_LPC13Uxx_H */
diff --git a/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/liblinks.xml b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/liblinks.xml
new file mode 100644
index 00000000..80eb9b85
--- /dev/null
+++ b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/liblinks.xml
@@ -0,0 +1,32 @@
+
+
+
+
+ ${workspace_loc:/CMSIS_CORE_LPC13Uxx/inc}
+
+
+ __USE_CMSIS=CMSIS_CORE_LPC13Uxx
+
+
+ CMSIS_CORE_LPC13Uxx
+
+
+ ${workspace_loc:/CMSIS_CORE_LPC13Uxx/Debug}
+
+
+ ${workspace_loc:/CMSIS_CORE_LPC13Uxx/Release}
+
+
+ CMSIS_CORE_LPC13Uxx
+
+
+
diff --git a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/src/system_LPC13Uxx.c b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/src/system_LPC13Uxx.c
similarity index 96%
rename from mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/src/system_LPC13Uxx.c
rename to mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/src/system_LPC13Uxx.c
index abde7633..fbdef8a9 100644
--- a/mcu/lpc13uxx/CMSISv2p10_LPC13Uxx/src/system_LPC13Uxx.c
+++ b/mcu/lpc13uxx/CMSIS_CORE_LPC13Uxx/src/system_LPC13Uxx.c
@@ -1,437 +1,437 @@
-/******************************************************************************
- * @file system_LPC13Uxx.c
- * @purpose CMSIS Cortex-M3 Device Peripheral Access Layer Source File
- * for the NXP LPC13xx Device Series
- * @version V1.10
- * @date 24. November 2010
- *
- * @note
- * Copyright (C) 2009-2010 ARM Limited. All rights reserved.
- *
- * @par
- * ARM Limited (ARM) is supplying this software for use with Cortex-M
- * processor based microcontrollers. This file can be freely distributed
- * within development tools that are supporting such ARM based processors.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
- * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
- * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
- * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
- *
- ******************************************************************************/
-
-
-#include
-#include "LPC13Uxx.h"
-
-/*
-//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
-*/
-
-/*--------------------- Clock Configuration ----------------------------------
-//
-// Clock Configuration
-// System Oscillator Control Register (SYSOSCCTRL)
-// BYPASS: System Oscillator Bypass Enable
-// If enabled then PLL input (sys_osc_clk) is fed
-// directly from XTALIN and XTALOUT pins.
-// FREQRANGE: System Oscillator Frequency Range
-// Determines frequency range for Low-power oscillator.
-// <0=> 1 - 20 MHz
-// <1=> 15 - 25 MHz
-//
-//
-// Watchdog Oscillator Control Register (WDTOSCCTRL)
-// DIVSEL: Select Divider for Fclkana
-// wdt_osc_clk = Fclkana/ (2 × (1 + DIVSEL))
-// <0-31>
-// FREQSEL: Select Watchdog Oscillator Analog Output Frequency (Fclkana)
-// <0=> Undefined
-// <1=> 0.5 MHz
-// <2=> 0.8 MHz
-// <3=> 1.1 MHz
-// <4=> 1.4 MHz
-// <5=> 1.6 MHz
-// <6=> 1.8 MHz
-// <7=> 2.0 MHz
-// <8=> 2.2 MHz
-// <9=> 2.4 MHz
-// <10=> 2.6 MHz
-// <11=> 2.7 MHz
-// <12=> 2.9 MHz
-// <13=> 3.1 MHz
-// <14=> 3.2 MHz
-// <15=> 3.4 MHz
-//
-//
-// System PLL Control Register (SYSPLLCTRL)
-// F_clkout = M * F_clkin = F_CCO / (2 * P)
-// F_clkin must be in the range of 10 MHz to 25 MHz
-// F_CCO must be in the range of 156 MHz to 320 MHz
-// MSEL: Feedback Divider Selection
-// M = MSEL + 1
-// <0-31>
-// PSEL: Post Divider Selection
-// <0=> P = 1
-// <1=> P = 2
-// <2=> P = 4
-// <3=> P = 8
-//
-//
-// System PLL Clock Source Select Register (SYSPLLCLKSEL)
-// SEL: System PLL Clock Source
-// <0=> IRC Oscillator
-// <1=> System Oscillator
-// <2=> Reserved
-// <3=> Reserved
-//
-//
-// Main Clock Source Select Register (MAINCLKSEL)
-// SEL: Clock Source for Main Clock
-// <0=> IRC Oscillator
-// <1=> Input Clock to System PLL
-// <2=> WDT Oscillator
-// <3=> System PLL Clock Out
-//
-//
-// System AHB Clock Divider Register (SYSAHBCLKDIV)
-// DIV: System AHB Clock Divider
-// Divides main clock to provide system clock to core, memories, and peripherals.
-// 0 = is disabled
-// <0-255>
-//
-//
-// USB PLL Control Register (USBPLLCTRL)
-// F_clkout = M * F_clkin = F_CCO / (2 * P)
-// F_clkin must be in the range of 10 MHz to 25 MHz
-// F_CCO must be in the range of 156 MHz to 320 MHz
-// MSEL: Feedback Divider Selection
-// M = MSEL + 1
-// <0-31>
-// PSEL: Post Divider Selection
-// <0=> P = 1
-// <1=> P = 2
-// <2=> P = 4
-// <3=> P = 8
-//
-//
-// USB PLL Clock Source Select Register (USBPLLCLKSEL)
-// SEL: USB PLL Clock Source
-// USB PLL clock source must be switched to System Oscillator for correct USB operation
-// <0=> IRC Oscillator
-// <1=> System Oscillator
-// <2=> Reserved
-// <3=> Reserved
-//
-//
-// USB Clock Source Select Register (USBCLKSEL)
-// SEL: System PLL Clock Source
-// <0=> USB PLL out
-// <1=> Main clock
-// <2=> Reserved
-// <3=> Reserved
-//
-//
-// USB Clock Divider Register (USBCLKDIV)
-// DIV: USB Clock Divider
-// Divides USB clock to 48 MHz.
-// 0 = is disabled
-// <0-255>
-//
-//
-*/
-#define CLOCK_SETUP 1
-#define SYSOSCCTRL_Val 0x00000000 // Reset: 0x000
-#define WDTOSCCTRL_Val 0x00000000 // Reset: 0x000
-#define SYSPLLCTRL_Val 0x00000025 // Reset: 0x000
-#define SYSPLLCLKSEL_Val 0x00000001 // Reset: 0x000
-#define MAINCLKSEL_Val 0x00000003 // Reset: 0x000
-#define SYSAHBCLKDIV_Val 0x00000001 // Reset: 0x001
-#define USBPLLCTRL_Val 0x00000023 // Reset: 0x000
-#define USBPLLCLKSEL_Val 0x00000001 // Reset: 0x000
-#define USBCLKSEL_Val 0x00000000 // Reset: 0x000
-#define USBCLKDIV_Val 0x00000001 // Reset: 0x001
-
-/*
-//-------- <<< end of configuration section >>> ------------------------------
-*/
-
-/*----------------------------------------------------------------------------
- Check the register settings
- *----------------------------------------------------------------------------*/
-#define CHECK_RANGE(val, min, max) ((val < min) || (val > max))
-#define CHECK_RSVD(val, mask) (val & mask)
-
-/* Clock Configuration -------------------------------------------------------*/
-#if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003))
- #error "SYSOSCCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF))
- #error "WDTOSCCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2))
- #error "SYSPLLCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF))
- #error "SYSPLLCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003))
- #error "MAINCLKSEL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255))
- #error "SYSAHBCLKDIV: Value out of range!"
-#endif
-
-#if (CHECK_RANGE((USBPLLCLKSEL_Val), 0, 1))
- #error "USBPLLCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RSVD((USBPLLCTRL_Val), ~0x000001FF))
- #error "USBPLLCTRL: Invalid values of reserved bits!"
-#endif
-
-#if (CHECK_RANGE((USBCLKSEL_Val), 0, 1))
- #error "USBCLKSEL: Value out of range!"
-#endif
-
-#if (CHECK_RANGE((USBCLKDIV_Val), 0, 255))
- #error "USBCLKDIV: Value out of range!"
-#endif
-
-
-/*----------------------------------------------------------------------------
- DEFINES
- *----------------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------------
- Define clocks
- *----------------------------------------------------------------------------*/
-#define __XTAL (12000000UL) /* Oscillator frequency */
-#define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */
-#define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */
-
-
-#define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F)
-#define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2)
-
-#if (CLOCK_SETUP) /* Clock Setup */
- #if (__FREQSEL == 0)
- #define __WDT_OSC_CLK ( 0) /* undefined */
- #elif (__FREQSEL == 1)
- #define __WDT_OSC_CLK ( 500000 / __DIVSEL)
- #elif (__FREQSEL == 2)
- #define __WDT_OSC_CLK ( 800000 / __DIVSEL)
- #elif (__FREQSEL == 3)
- #define __WDT_OSC_CLK (1100000 / __DIVSEL)
- #elif (__FREQSEL == 4)
- #define __WDT_OSC_CLK (1400000 / __DIVSEL)
- #elif (__FREQSEL == 5)
- #define __WDT_OSC_CLK (1600000 / __DIVSEL)
- #elif (__FREQSEL == 6)
- #define __WDT_OSC_CLK (1800000 / __DIVSEL)
- #elif (__FREQSEL == 7)
- #define __WDT_OSC_CLK (2000000 / __DIVSEL)
- #elif (__FREQSEL == 8)
- #define __WDT_OSC_CLK (2200000 / __DIVSEL)
- #elif (__FREQSEL == 9)
- #define __WDT_OSC_CLK (2400000 / __DIVSEL)
- #elif (__FREQSEL == 10)
- #define __WDT_OSC_CLK (2600000 / __DIVSEL)
- #elif (__FREQSEL == 11)
- #define __WDT_OSC_CLK (2700000 / __DIVSEL)
- #elif (__FREQSEL == 12)
- #define __WDT_OSC_CLK (2900000 / __DIVSEL)
- #elif (__FREQSEL == 13)
- #define __WDT_OSC_CLK (3100000 / __DIVSEL)
- #elif (__FREQSEL == 14)
- #define __WDT_OSC_CLK (3200000 / __DIVSEL)
- #else
- #define __WDT_OSC_CLK (3400000 / __DIVSEL)
- #endif
-
- /* sys_pllclkin calculation */
- #if ((SYSPLLCLKSEL_Val & 0x03) == 0)
- #define __SYS_PLLCLKIN (__IRC_OSC_CLK)
- #elif ((SYSPLLCLKSEL_Val & 0x03) == 1)
- #define __SYS_PLLCLKIN (__SYS_OSC_CLK)
- #else
- #define __SYS_PLLCLKIN (0)
- #endif
-
- #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1))
-
- /* main clock calculation */
- #if ((MAINCLKSEL_Val & 0x03) == 0)
- #define __MAIN_CLOCK (__IRC_OSC_CLK)
- #elif ((MAINCLKSEL_Val & 0x03) == 1)
- #define __MAIN_CLOCK (__SYS_PLLCLKIN)
- #elif ((MAINCLKSEL_Val & 0x03) == 2)
- #if (__FREQSEL == 0)
- #error "MAINCLKSEL: WDT Oscillator selected but FREQSEL is undefined!"
- #else
- #define __MAIN_CLOCK (__WDT_OSC_CLK)
- #endif
- #elif ((MAINCLKSEL_Val & 0x03) == 3)
- #define __MAIN_CLOCK (__SYS_PLLCLKOUT)
- #else
- #define __MAIN_CLOCK (0)
- #endif
-
- #define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val)
-
-#else
- #define __SYSTEM_CLOCK (__IRC_OSC_CLK)
-#endif // CLOCK_SETUP
-
-
-/*----------------------------------------------------------------------------
- Clock Variable definitions
- *----------------------------------------------------------------------------*/
-uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/
-
-
-/*----------------------------------------------------------------------------
- Clock functions
- *----------------------------------------------------------------------------*/
-void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */
-{
- uint32_t wdt_osc = 0;
-
- /* Determine clock frequency according to clock register values */
- switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) {
- case 0: wdt_osc = 0; break;
- case 1: wdt_osc = 500000; break;
- case 2: wdt_osc = 800000; break;
- case 3: wdt_osc = 1100000; break;
- case 4: wdt_osc = 1400000; break;
- case 5: wdt_osc = 1600000; break;
- case 6: wdt_osc = 1800000; break;
- case 7: wdt_osc = 2000000; break;
- case 8: wdt_osc = 2200000; break;
- case 9: wdt_osc = 2400000; break;
- case 10: wdt_osc = 2600000; break;
- case 11: wdt_osc = 2700000; break;
- case 12: wdt_osc = 2900000; break;
- case 13: wdt_osc = 3100000; break;
- case 14: wdt_osc = 3200000; break;
- case 15: wdt_osc = 3400000; break;
- }
- wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2;
-
- switch (LPC_SYSCON->MAINCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- SystemCoreClock = __IRC_OSC_CLK;
- break;
- case 1: /* Input Clock to System PLL */
- switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- SystemCoreClock = __IRC_OSC_CLK;
- break;
- case 1: /* System oscillator */
- SystemCoreClock = __SYS_OSC_CLK;
- break;
- case 2: /* Reserved */
- case 3: /* Reserved */
- SystemCoreClock = 0;
- break;
- }
- break;
- case 2: /* WDT Oscillator */
- SystemCoreClock = wdt_osc;
- break;
- case 3: /* System PLL Clock Out */
- switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
- case 0: /* Internal RC oscillator */
- if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
- SystemCoreClock = __IRC_OSC_CLK;
- } else {
- SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
- }
- break;
- case 1: /* System oscillator */
- if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
- SystemCoreClock = __SYS_OSC_CLK;
- } else {
- SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
- }
- break;
- case 2: /* Reserved */
- case 3: /* Reserved */
- SystemCoreClock = 0;
- break;
- }
- break;
- }
-
- SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV;
-
-}
-
-/**
- * Initialize the system
- *
- * @param none
- * @return none
- *
- * @brief Setup the microcontroller system.
- * Initialize the System.
- */
-void SystemInit (void) {
- volatile uint32_t i;
-
-#if (CLOCK_SETUP) /* Clock Setup */
-
-#if ((SYSPLLCLKSEL_Val & 0x03) == 1)
- LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */
- LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val;
- for (i = 0; i < 200; i++) __NOP();
-#endif
-
- LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */
-#if ((MAINCLKSEL_Val & 0x03) == 3) /* Main Clock is PLL Out */
- LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val;
- LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */
- while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */
-#endif
-
-#if (((MAINCLKSEL_Val & 0x03) == 2) )
- LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val;
- LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */
- for (i = 0; i < 200; i++) __NOP();
-#endif
-
- LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */
-
- LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val;
-
-#if ((USBCLKDIV_Val & 0x1FF) != 0) /* USB clock is used */
- LPC_SYSCON->PDRUNCFG &= ~(1 << 10); /* Power-up USB PHY */
-
- /* Regardless USB PLL is used as USB clock or not, USB PLL needs to be configured. */
- LPC_SYSCON->PDRUNCFG &= ~(1 << 8); /* Power-up USB PLL */
- LPC_SYSCON->USBPLLCLKSEL = USBPLLCLKSEL_Val; /* Select PLL Input */
- LPC_SYSCON->USBPLLCTRL = USBPLLCTRL_Val;
- while (!(LPC_SYSCON->USBPLLSTAT & 0x01)); /* Wait Until PLL Locked */
-
- LPC_SYSCON->USBCLKSEL = USBCLKSEL_Val; /* Select USB Clock */
- LPC_SYSCON->USBCLKDIV = USBCLKDIV_Val; /* Set USB clock divider */
-
-#else /* USB clock is not used */
- LPC_SYSCON->PDRUNCFG |= (1 << 10); /* Power-down USB PHY */
- LPC_SYSCON->PDRUNCFG |= (1 << 8); /* Power-down USB PLL */
-#endif
-
-#endif
-
- /* System clock to the IOCON needs to be enabled or
- most of the I/O related peripherals won't work. */
- LPC_SYSCON->SYSAHBCLKCTRL |= (1<<16);
-
-}
+/******************************************************************************
+ * @file system_LPC13Uxx.c
+ * @purpose CMSIS Cortex-M3 Device Peripheral Access Layer Source File
+ * for the NXP LPC13xx Device Series
+ * @version V1.10
+ * @date 24. November 2010
+ *
+ * @note
+ * Copyright (C) 2009-2010 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#include
+#include "LPC13Uxx.h"
+
+/*
+//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
+*/
+
+/*--------------------- Clock Configuration ----------------------------------
+//
+// Clock Configuration
+// System Oscillator Control Register (SYSOSCCTRL)
+// BYPASS: System Oscillator Bypass Enable
+// If enabled then PLL input (sys_osc_clk) is fed
+// directly from XTALIN and XTALOUT pins.
+// FREQRANGE: System Oscillator Frequency Range
+// Determines frequency range for Low-power oscillator.
+// <0=> 1 - 20 MHz
+// <1=> 15 - 25 MHz
+//
+//
+// Watchdog Oscillator Control Register (WDTOSCCTRL)
+// DIVSEL: Select Divider for Fclkana
+// wdt_osc_clk = Fclkana/ (2 × (1 + DIVSEL))
+// <0-31>
+// FREQSEL: Select Watchdog Oscillator Analog Output Frequency (Fclkana)
+// <0=> Undefined
+// <1=> 0.5 MHz
+// <2=> 0.8 MHz
+// <3=> 1.1 MHz
+// <4=> 1.4 MHz
+// <5=> 1.6 MHz
+// <6=> 1.8 MHz
+// <7=> 2.0 MHz
+// <8=> 2.2 MHz
+// <9=> 2.4 MHz
+// <10=> 2.6 MHz
+// <11=> 2.7 MHz
+// <12=> 2.9 MHz
+// <13=> 3.1 MHz
+// <14=> 3.2 MHz
+// <15=> 3.4 MHz
+//
+//
+// System PLL Control Register (SYSPLLCTRL)
+// F_clkout = M * F_clkin = F_CCO / (2 * P)
+// F_clkin must be in the range of 10 MHz to 25 MHz
+// F_CCO must be in the range of 156 MHz to 320 MHz
+// MSEL: Feedback Divider Selection
+// M = MSEL + 1
+// <0-31>
+// PSEL: Post Divider Selection
+// <0=> P = 1
+// <1=> P = 2
+// <2=> P = 4
+// <3=> P = 8
+//
+//
+// System PLL Clock Source Select Register (SYSPLLCLKSEL)
+// SEL: System PLL Clock Source
+// <0=> IRC Oscillator
+// <1=> System Oscillator
+// <2=> Reserved
+// <3=> Reserved
+//
+//
+// Main Clock Source Select Register (MAINCLKSEL)
+// SEL: Clock Source for Main Clock
+// <0=> IRC Oscillator
+// <1=> Input Clock to System PLL
+// <2=> WDT Oscillator
+// <3=> System PLL Clock Out
+//
+//
+// System AHB Clock Divider Register (SYSAHBCLKDIV)
+// DIV: System AHB Clock Divider
+// Divides main clock to provide system clock to core, memories, and peripherals.
+// 0 = is disabled
+// <0-255>
+//
+//
+// USB PLL Control Register (USBPLLCTRL)
+// F_clkout = M * F_clkin = F_CCO / (2 * P)
+// F_clkin must be in the range of 10 MHz to 25 MHz
+// F_CCO must be in the range of 156 MHz to 320 MHz
+// MSEL: Feedback Divider Selection
+// M = MSEL + 1
+// <0-31>
+// PSEL: Post Divider Selection
+// <0=> P = 1
+// <1=> P = 2
+// <2=> P = 4
+// <3=> P = 8
+//
+//
+// USB PLL Clock Source Select Register (USBPLLCLKSEL)
+// SEL: USB PLL Clock Source
+// USB PLL clock source must be switched to System Oscillator for correct USB operation
+// <0=> IRC Oscillator
+// <1=> System Oscillator
+// <2=> Reserved
+// <3=> Reserved
+//
+//
+// USB Clock Source Select Register (USBCLKSEL)
+// SEL: System PLL Clock Source
+// <0=> USB PLL out
+// <1=> Main clock
+// <2=> Reserved
+// <3=> Reserved
+//
+//
+// USB Clock Divider Register (USBCLKDIV)
+// DIV: USB Clock Divider
+// Divides USB clock to 48 MHz.
+// 0 = is disabled
+// <0-255>
+//
+//
+*/
+#define CLOCK_SETUP 1
+#define SYSOSCCTRL_Val 0x00000000 // Reset: 0x000
+#define WDTOSCCTRL_Val 0x00000000 // Reset: 0x000
+#define SYSPLLCTRL_Val 0x00000025 // Reset: 0x000
+#define SYSPLLCLKSEL_Val 0x00000001 // Reset: 0x000
+#define MAINCLKSEL_Val 0x00000003 // Reset: 0x000
+#define SYSAHBCLKDIV_Val 0x00000001 // Reset: 0x001
+#define USBPLLCTRL_Val 0x00000023 // Reset: 0x000
+#define USBPLLCLKSEL_Val 0x00000001 // Reset: 0x000
+#define USBCLKSEL_Val 0x00000000 // Reset: 0x000
+#define USBCLKDIV_Val 0x00000001 // Reset: 0x001
+
+/*
+//-------- <<< end of configuration section >>> ------------------------------
+*/
+
+/*----------------------------------------------------------------------------
+ Check the register settings
+ *----------------------------------------------------------------------------*/
+#define CHECK_RANGE(val, min, max) ((val < min) || (val > max))
+#define CHECK_RSVD(val, mask) (val & mask)
+
+/* Clock Configuration -------------------------------------------------------*/
+#if (CHECK_RSVD((SYSOSCCTRL_Val), ~0x00000003))
+ #error "SYSOSCCTRL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((WDTOSCCTRL_Val), ~0x000001FF))
+ #error "WDTOSCCTRL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RANGE((SYSPLLCLKSEL_Val), 0, 2))
+ #error "SYSPLLCLKSEL: Value out of range!"
+#endif
+
+#if (CHECK_RSVD((SYSPLLCTRL_Val), ~0x000001FF))
+ #error "SYSPLLCTRL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RSVD((MAINCLKSEL_Val), ~0x00000003))
+ #error "MAINCLKSEL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RANGE((SYSAHBCLKDIV_Val), 0, 255))
+ #error "SYSAHBCLKDIV: Value out of range!"
+#endif
+
+#if (CHECK_RANGE((USBPLLCLKSEL_Val), 0, 1))
+ #error "USBPLLCLKSEL: Value out of range!"
+#endif
+
+#if (CHECK_RSVD((USBPLLCTRL_Val), ~0x000001FF))
+ #error "USBPLLCTRL: Invalid values of reserved bits!"
+#endif
+
+#if (CHECK_RANGE((USBCLKSEL_Val), 0, 1))
+ #error "USBCLKSEL: Value out of range!"
+#endif
+
+#if (CHECK_RANGE((USBCLKDIV_Val), 0, 255))
+ #error "USBCLKDIV: Value out of range!"
+#endif
+
+
+/*----------------------------------------------------------------------------
+ DEFINES
+ *----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define __XTAL (12000000UL) /* Oscillator frequency */
+#define __SYS_OSC_CLK ( __XTAL) /* Main oscillator frequency */
+#define __IRC_OSC_CLK (12000000UL) /* Internal RC oscillator frequency */
+
+
+#define __FREQSEL ((WDTOSCCTRL_Val >> 5) & 0x0F)
+#define __DIVSEL (((WDTOSCCTRL_Val & 0x1F) << 1) + 2)
+
+#if (CLOCK_SETUP) /* Clock Setup */
+ #if (__FREQSEL == 0)
+ #define __WDT_OSC_CLK ( 0) /* undefined */
+ #elif (__FREQSEL == 1)
+ #define __WDT_OSC_CLK ( 500000 / __DIVSEL)
+ #elif (__FREQSEL == 2)
+ #define __WDT_OSC_CLK ( 800000 / __DIVSEL)
+ #elif (__FREQSEL == 3)
+ #define __WDT_OSC_CLK (1100000 / __DIVSEL)
+ #elif (__FREQSEL == 4)
+ #define __WDT_OSC_CLK (1400000 / __DIVSEL)
+ #elif (__FREQSEL == 5)
+ #define __WDT_OSC_CLK (1600000 / __DIVSEL)
+ #elif (__FREQSEL == 6)
+ #define __WDT_OSC_CLK (1800000 / __DIVSEL)
+ #elif (__FREQSEL == 7)
+ #define __WDT_OSC_CLK (2000000 / __DIVSEL)
+ #elif (__FREQSEL == 8)
+ #define __WDT_OSC_CLK (2200000 / __DIVSEL)
+ #elif (__FREQSEL == 9)
+ #define __WDT_OSC_CLK (2400000 / __DIVSEL)
+ #elif (__FREQSEL == 10)
+ #define __WDT_OSC_CLK (2600000 / __DIVSEL)
+ #elif (__FREQSEL == 11)
+ #define __WDT_OSC_CLK (2700000 / __DIVSEL)
+ #elif (__FREQSEL == 12)
+ #define __WDT_OSC_CLK (2900000 / __DIVSEL)
+ #elif (__FREQSEL == 13)
+ #define __WDT_OSC_CLK (3100000 / __DIVSEL)
+ #elif (__FREQSEL == 14)
+ #define __WDT_OSC_CLK (3200000 / __DIVSEL)
+ #else
+ #define __WDT_OSC_CLK (3400000 / __DIVSEL)
+ #endif
+
+ /* sys_pllclkin calculation */
+ #if ((SYSPLLCLKSEL_Val & 0x03) == 0)
+ #define __SYS_PLLCLKIN (__IRC_OSC_CLK)
+ #elif ((SYSPLLCLKSEL_Val & 0x03) == 1)
+ #define __SYS_PLLCLKIN (__SYS_OSC_CLK)
+ #else
+ #define __SYS_PLLCLKIN (0)
+ #endif
+
+ #define __SYS_PLLCLKOUT (__SYS_PLLCLKIN * ((SYSPLLCTRL_Val & 0x01F) + 1))
+
+ /* main clock calculation */
+ #if ((MAINCLKSEL_Val & 0x03) == 0)
+ #define __MAIN_CLOCK (__IRC_OSC_CLK)
+ #elif ((MAINCLKSEL_Val & 0x03) == 1)
+ #define __MAIN_CLOCK (__SYS_PLLCLKIN)
+ #elif ((MAINCLKSEL_Val & 0x03) == 2)
+ #if (__FREQSEL == 0)
+ #error "MAINCLKSEL: WDT Oscillator selected but FREQSEL is undefined!"
+ #else
+ #define __MAIN_CLOCK (__WDT_OSC_CLK)
+ #endif
+ #elif ((MAINCLKSEL_Val & 0x03) == 3)
+ #define __MAIN_CLOCK (__SYS_PLLCLKOUT)
+ #else
+ #define __MAIN_CLOCK (0)
+ #endif
+
+ #define __SYSTEM_CLOCK (__MAIN_CLOCK / SYSAHBCLKDIV_Val)
+
+#else
+ #define __SYSTEM_CLOCK (__IRC_OSC_CLK)
+#endif // CLOCK_SETUP
+
+
+/*----------------------------------------------------------------------------
+ Clock Variable definitions
+ *----------------------------------------------------------------------------*/
+uint32_t SystemCoreClock = __SYSTEM_CLOCK;/*!< System Clock Frequency (Core Clock)*/
+
+
+/*----------------------------------------------------------------------------
+ Clock functions
+ *----------------------------------------------------------------------------*/
+void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */
+{
+ uint32_t wdt_osc = 0;
+
+ /* Determine clock frequency according to clock register values */
+ switch ((LPC_SYSCON->WDTOSCCTRL >> 5) & 0x0F) {
+ case 0: wdt_osc = 0; break;
+ case 1: wdt_osc = 500000; break;
+ case 2: wdt_osc = 800000; break;
+ case 3: wdt_osc = 1100000; break;
+ case 4: wdt_osc = 1400000; break;
+ case 5: wdt_osc = 1600000; break;
+ case 6: wdt_osc = 1800000; break;
+ case 7: wdt_osc = 2000000; break;
+ case 8: wdt_osc = 2200000; break;
+ case 9: wdt_osc = 2400000; break;
+ case 10: wdt_osc = 2600000; break;
+ case 11: wdt_osc = 2700000; break;
+ case 12: wdt_osc = 2900000; break;
+ case 13: wdt_osc = 3100000; break;
+ case 14: wdt_osc = 3200000; break;
+ case 15: wdt_osc = 3400000; break;
+ }
+ wdt_osc /= ((LPC_SYSCON->WDTOSCCTRL & 0x1F) << 1) + 2;
+
+ switch (LPC_SYSCON->MAINCLKSEL & 0x03) {
+ case 0: /* Internal RC oscillator */
+ SystemCoreClock = __IRC_OSC_CLK;
+ break;
+ case 1: /* Input Clock to System PLL */
+ switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
+ case 0: /* Internal RC oscillator */
+ SystemCoreClock = __IRC_OSC_CLK;
+ break;
+ case 1: /* System oscillator */
+ SystemCoreClock = __SYS_OSC_CLK;
+ break;
+ case 2: /* Reserved */
+ case 3: /* Reserved */
+ SystemCoreClock = 0;
+ break;
+ }
+ break;
+ case 2: /* WDT Oscillator */
+ SystemCoreClock = wdt_osc;
+ break;
+ case 3: /* System PLL Clock Out */
+ switch (LPC_SYSCON->SYSPLLCLKSEL & 0x03) {
+ case 0: /* Internal RC oscillator */
+ if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
+ SystemCoreClock = __IRC_OSC_CLK;
+ } else {
+ SystemCoreClock = __IRC_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
+ }
+ break;
+ case 1: /* System oscillator */
+ if (LPC_SYSCON->SYSPLLCTRL & 0x180) {
+ SystemCoreClock = __SYS_OSC_CLK;
+ } else {
+ SystemCoreClock = __SYS_OSC_CLK * ((LPC_SYSCON->SYSPLLCTRL & 0x01F) + 1);
+ }
+ break;
+ case 2: /* Reserved */
+ case 3: /* Reserved */
+ SystemCoreClock = 0;
+ break;
+ }
+ break;
+ }
+
+ SystemCoreClock /= LPC_SYSCON->SYSAHBCLKDIV;
+
+}
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System.
+ */
+void SystemInit (void) {
+ volatile uint32_t i;
+
+#if (CLOCK_SETUP) /* Clock Setup */
+
+#if ((SYSPLLCLKSEL_Val & 0x03) == 1)
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 5); /* Power-up System Osc */
+ LPC_SYSCON->SYSOSCCTRL = SYSOSCCTRL_Val;
+ for (i = 0; i < 200; i++) __NOP();
+#endif
+
+ LPC_SYSCON->SYSPLLCLKSEL = SYSPLLCLKSEL_Val; /* Select PLL Input */
+#if ((MAINCLKSEL_Val & 0x03) == 3) /* Main Clock is PLL Out */
+ LPC_SYSCON->SYSPLLCTRL = SYSPLLCTRL_Val;
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 7); /* Power-up SYSPLL */
+ while (!(LPC_SYSCON->SYSPLLSTAT & 0x01)); /* Wait Until PLL Locked */
+#endif
+
+#if (((MAINCLKSEL_Val & 0x03) == 2) )
+ LPC_SYSCON->WDTOSCCTRL = WDTOSCCTRL_Val;
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* Power-up WDT Clock */
+ for (i = 0; i < 200; i++) __NOP();
+#endif
+
+ LPC_SYSCON->MAINCLKSEL = MAINCLKSEL_Val; /* Select PLL Clock Output */
+
+ LPC_SYSCON->SYSAHBCLKDIV = SYSAHBCLKDIV_Val;
+
+#if ((USBCLKDIV_Val & 0x1FF) != 0) /* USB clock is used */
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 10); /* Power-up USB PHY */
+
+ /* Regardless USB PLL is used as USB clock or not, USB PLL needs to be configured. */
+ LPC_SYSCON->PDRUNCFG &= ~(1 << 8); /* Power-up USB PLL */
+ LPC_SYSCON->USBPLLCLKSEL = USBPLLCLKSEL_Val; /* Select PLL Input */
+ LPC_SYSCON->USBPLLCTRL = USBPLLCTRL_Val;
+ while (!(LPC_SYSCON->USBPLLSTAT & 0x01)); /* Wait Until PLL Locked */
+
+ LPC_SYSCON->USBCLKSEL = USBCLKSEL_Val; /* Select USB Clock */
+ LPC_SYSCON->USBCLKDIV = USBCLKDIV_Val; /* Set USB clock divider */
+
+#else /* USB clock is not used */
+ LPC_SYSCON->PDRUNCFG |= (1 << 10); /* Power-down USB PHY */
+ LPC_SYSCON->PDRUNCFG |= (1 << 8); /* Power-down USB PLL */
+#endif
+
+#endif
+
+ /* System clock to the IOCON needs to be enabled or
+ most of the I/O related peripherals won't work. */
+ LPC_SYSCON->SYSAHBCLKCTRL |= (1<<16);
+
+}