jesus/tinyusb
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

use lpcopen for lpc43x, work well

Browse Source
This commit is contained in:
hathach
2018-12-03 22:58:21 +07:00
parent 29416a5c1a
commit 9fec39d893
3 changed files with 19 additions and 44 deletions
Download Patch File Download Diff File Expand all files Collapse all files
hw/bsp/ea4357/board_ea4357.c
+6 -18
View File
@@ -41,8 +41,6 @@
#include "bsp/board.h"
#include "pca9532.h"
#include "tusb.h"
#define BOARD_UART_PORT LPC_USART0
#define BOARD_UART_PIN_PORT 0x0f
#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
@@ -97,16 +95,7 @@ const uint32_t OscRateIn = 12000000;
static const PINMUX_GRP_T pinmuxing[] =
{
/* RMII pin group */
{0x1, 19, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0)}, //ENET_REF_CLK
{0x0, 1, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC6)}, //ENET_TXEN
{0x1, 18, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_TXD0
{0x1, 20, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_TXD1
{0x1, 17, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_MDIO
{0xC, 1, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_MDC
{0x1, 16, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC7)}, //ENET_RX_DV
{0x1, 15, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_RXD0
{0x0, 0, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2)}, //ENET_RXD1
// USB
/* I2S */
{0x3, 0, (SCU_PINIO_FAST | SCU_MODE_FUNC2)}, //I2S0_TX_CLK
@@ -181,16 +170,15 @@ void board_init(void)
UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
#endif
#if 0
//------------- USB -------------//
// USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
scu_pinmux(0x02, 3, MD_PUP | MD_EZI, FUNC7); // USB0 VBus Power
// USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board)
Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7);
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
scu_pinmux(0x09, 5, GPIO_PDN, FUNC4); // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low.
GPIO_SetDir(5, BIT_(18), 1);
// P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low.
Chip_SCU_PinMuxSet(9, 5, SCU_MODE_PULLDOWN | SCU_MODE_FUNC4);
Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 18);
#endif
#endif
// USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required
// TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host