Merge branch 'master' of https://github.com/hathach/tinyusb into stm32f4
This commit is contained in:
William D. Jones
@@ -81,8 +81,7 @@ LIB_SOURCE += \
|
||||
src/class/cdc/cdc_device.c \
|
||||
src/class/hid/hid_device.c \
|
||||
src/tusb.c \
|
||||
src/portable/$(VENDOR)/$(CHIP_FAMILY)/dcd_$(CHIP_FAMILY).c \
|
||||
src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c
|
||||
src/portable/$(VENDOR)/$(CHIP_FAMILY)/dcd_$(CHIP_FAMILY).c
|
||||
|
||||
SRC_C += $(LIB_SOURCE)
|
||||
|
||||
|
||||
@@ -3,4 +3,10 @@
|
||||
<import file_name="nrf5x/nrf5x.emProject" />
|
||||
<import file_name="samd21/samd21.emProject" />
|
||||
<import file_name="samd51/samd51.emProject" />
|
||||
<import file_name="lpc43xx/lpc43xx.emProject" />
|
||||
<import file_name="lpc175x_6x/lpc175x_6x.emProject" />
|
||||
<import file_name="lpc13xx/lpc13xx.emProject" />
|
||||
<import file_name="lpc11u6x/lpc11u6x.emProject" />
|
||||
<import file_name="lpc18xx/lpc18xx.emProject" />
|
||||
<import file_name="lpc40xx/lpc40xx.emProject" />
|
||||
</solution>
|
||||
|
||||
@@ -0,0 +1,145 @@
|
||||
/*********************************************************************
|
||||
* SEGGER Microcontroller GmbH *
|
||||
* The Embedded Experts *
|
||||
**********************************************************************
|
||||
* *
|
||||
* (c) 2014 - 2018 SEGGER Microcontroller GmbH *
|
||||
* *
|
||||
* www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
**********************************************************************
|
||||
* *
|
||||
* All rights reserved. *
|
||||
* *
|
||||
* Redistribution and use in source and binary forms, with or *
|
||||
* without modification, are permitted provided that the following *
|
||||
* conditions are met: *
|
||||
* *
|
||||
* - Redistributions of source code must retain the above copyright *
|
||||
* notice, this list of conditions and the following disclaimer. *
|
||||
* *
|
||||
* - Neither the name of SEGGER Microcontroller GmbH *
|
||||
* nor the names of its contributors may be used to endorse or *
|
||||
* promote products derived from this software without specific *
|
||||
* prior written permission. *
|
||||
* *
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
|
||||
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
|
||||
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
|
||||
* DISCLAIMED. *
|
||||
* IN NO EVENT SHALL SEGGER Microcontroller GmbH BE LIABLE FOR *
|
||||
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
|
||||
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
|
||||
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
|
||||
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
|
||||
* DAMAGE. *
|
||||
* *
|
||||
*********************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* NO_STACK_INIT *
|
||||
* *
|
||||
* If defined, the stack pointer will not be initialised. *
|
||||
* *
|
||||
* NO_SYSTEM_INIT *
|
||||
* *
|
||||
* If defined, the SystemInit() function will not be called. By default *
|
||||
* SystemInit() is called after reset to enable the clocks and memories to *
|
||||
* be initialised prior to any C startup initialisation. *
|
||||
* *
|
||||
* NO_VTOR_CONFIG *
|
||||
* *
|
||||
* If defined, the vector table offset register will not be configured. *
|
||||
* *
|
||||
* MEMORY_INIT *
|
||||
* *
|
||||
* If defined, the MemoryInit() function will be called. By default *
|
||||
* MemoryInit() is called after SystemInit() to enable an external memory *
|
||||
* controller. *
|
||||
* *
|
||||
* STACK_INIT_VAL *
|
||||
* *
|
||||
* If defined, specifies the initial stack pointer value. If undefined, *
|
||||
* the stack pointer will be initialised to point to the end of the *
|
||||
* RAM segment. *
|
||||
* *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, the exception vectors will be copied from Flash to RAM. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
|
||||
.global Reset_Handler
|
||||
.extern _vectors
|
||||
|
||||
.section .init, "ax"
|
||||
.thumb_func
|
||||
|
||||
.equ VTOR_REG, 0xE000ED08
|
||||
|
||||
#ifndef STACK_INIT_VAL
|
||||
#define STACK_INIT_VAL __RAM_segment_end__
|
||||
#endif
|
||||
|
||||
Reset_Handler:
|
||||
#ifndef NO_STACK_INIT
|
||||
/* Initialize main stack */
|
||||
ldr r0, =STACK_INIT_VAL
|
||||
ldr r1, =0x7
|
||||
bics r0, r1
|
||||
mov sp, r0
|
||||
#endif
|
||||
|
||||
#ifndef NO_SYSTEM_INIT
|
||||
/* Initialize system */
|
||||
ldr r0, =SystemInit
|
||||
blx r0
|
||||
.pushsection .init_array, "aw", %init_array
|
||||
.word SystemCoreClockUpdate
|
||||
.popsection
|
||||
#endif
|
||||
|
||||
#ifdef MEMORY_INIT
|
||||
ldr r0, =MemoryInit
|
||||
blx r0
|
||||
#endif
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
/* Copy exception vectors into RAM */
|
||||
ldr r0, =__vectors_start__
|
||||
ldr r1, =__vectors_end__
|
||||
ldr r2, =__vectors_ram_start__
|
||||
1:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
ldr r3, [r0]
|
||||
str r3, [r2]
|
||||
adds r0, r0, #4
|
||||
adds r2, r2, #4
|
||||
b 1b
|
||||
2:
|
||||
#endif
|
||||
|
||||
#ifndef NO_VTOR_CONFIG
|
||||
/* Configure vector table offset register */
|
||||
ldr r0, =VTOR_REG
|
||||
#ifdef VECTORS_IN_RAM
|
||||
ldr r1, =_vectors_ram
|
||||
#else
|
||||
ldr r1, =_vectors
|
||||
#endif
|
||||
str r1, [r0]
|
||||
#endif
|
||||
|
||||
/* Jump to program start */
|
||||
b _start
|
||||
|
||||
|
||||
@@ -0,0 +1,50 @@
|
||||
/*********************************************************************
|
||||
* SEGGER Microcontroller GmbH *
|
||||
* The Embedded Experts *
|
||||
**********************************************************************
|
||||
* *
|
||||
* (c) 2014 - 2018 SEGGER Microcontroller GmbH *
|
||||
* *
|
||||
* www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
**********************************************************************
|
||||
* *
|
||||
* All rights reserved. *
|
||||
* *
|
||||
* Redistribution and use in source and binary forms, with or *
|
||||
* without modification, are permitted provided that the following *
|
||||
* conditions are met: *
|
||||
* *
|
||||
* - Redistributions of source code must retain the above copyright *
|
||||
* notice, this list of conditions and the following disclaimer. *
|
||||
* *
|
||||
* - Neither the name of SEGGER Microcontroller GmbH *
|
||||
* nor the names of its contributors may be used to endorse or *
|
||||
* promote products derived from this software without specific *
|
||||
* prior written permission. *
|
||||
* *
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
|
||||
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
|
||||
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
|
||||
* DISCLAIMED. *
|
||||
* IN NO EVENT SHALL SEGGER Microcontroller GmbH BE LIABLE FOR *
|
||||
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
|
||||
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
|
||||
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
|
||||
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
|
||||
* DAMAGE. *
|
||||
* *
|
||||
*********************************************************************/
|
||||
|
||||
function Reset() {
|
||||
TargetInterface.resetAndStop();
|
||||
}
|
||||
|
||||
function EnableTrace(traceInterfaceType) {
|
||||
// TODO: Enable trace
|
||||
}
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
<!DOCTYPE Board_Memory_Definition_File>
|
||||
<root name="LPC11U68">
|
||||
<MemorySegment name="FLASH" start="0x00000000" size="0x00040000" access="ReadOnly" />
|
||||
<MemorySegment name="RAM" start="0x10000000" size="0x00008000" access="Read/Write" />
|
||||
<MemorySegment name="RAM2" start="0x20000000" size="0x00000800" access="Read/Write" />
|
||||
<MemorySegment name="RAM3" start="0x20004000" size="0x00000800" access="Read/Write" />
|
||||
</root>
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,405 @@
|
||||
/*********************************************************************
|
||||
* SEGGER Microcontroller GmbH *
|
||||
* The Embedded Experts *
|
||||
**********************************************************************
|
||||
* *
|
||||
* (c) 2014 - 2018 SEGGER Microcontroller GmbH *
|
||||
* *
|
||||
* www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
**********************************************************************
|
||||
* *
|
||||
* All rights reserved. *
|
||||
* *
|
||||
* Redistribution and use in source and binary forms, with or *
|
||||
* without modification, are permitted provided that the following *
|
||||
* conditions are met: *
|
||||
* *
|
||||
* - Redistributions of source code must retain the above copyright *
|
||||
* notice, this list of conditions and the following disclaimer. *
|
||||
* *
|
||||
* - Neither the name of SEGGER Microcontroller GmbH *
|
||||
* nor the names of its contributors may be used to endorse or *
|
||||
* promote products derived from this software without specific *
|
||||
* prior written permission. *
|
||||
* *
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
|
||||
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
|
||||
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
|
||||
* DISCLAIMED. *
|
||||
* IN NO EVENT SHALL SEGGER Microcontroller GmbH BE LIABLE FOR *
|
||||
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
|
||||
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
|
||||
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
|
||||
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
|
||||
* DAMAGE. *
|
||||
* *
|
||||
*********************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, an area of RAM will large enough to store the vector table *
|
||||
* will be reserved. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
.code 16
|
||||
|
||||
.section .init, "ax"
|
||||
.align 2
|
||||
|
||||
/*****************************************************************************
|
||||
* Default Exception Handlers *
|
||||
*****************************************************************************/
|
||||
|
||||
.thumb_func
|
||||
.weak NMI_Handler
|
||||
NMI_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak HardFault_Handler
|
||||
HardFault_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SVC_Handler
|
||||
SVC_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PendSV_Handler
|
||||
PendSV_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SysTick_Handler
|
||||
SysTick_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
Dummy_Handler:
|
||||
b .
|
||||
|
||||
#if defined(__OPTIMIZATION_SMALL)
|
||||
|
||||
.weak PIN_INT0_IRQHandler
|
||||
.thumb_set PIN_INT0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT1_IRQHandler
|
||||
.thumb_set PIN_INT1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT2_IRQHandler
|
||||
.thumb_set PIN_INT2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT3_IRQHandler
|
||||
.thumb_set PIN_INT3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT4_IRQHandler
|
||||
.thumb_set PIN_INT4_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT5_IRQHandler
|
||||
.thumb_set PIN_INT5_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT6_IRQHandler
|
||||
.thumb_set PIN_INT6_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT7_IRQHandler
|
||||
.thumb_set PIN_INT7_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak GINT0_IRQHandler
|
||||
.thumb_set GINT0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak GINT1_IRQHandler
|
||||
.thumb_set GINT1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C1_IRQHandler
|
||||
.thumb_set I2C1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USART1_4_IRQHandler
|
||||
.thumb_set USART1_4_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USART2_3_IRQHandler
|
||||
.thumb_set USART2_3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SCT0_1_IRQHandler
|
||||
.thumb_set SCT0_1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP1_IRQHandler
|
||||
.thumb_set SSP1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C0_IRQHandler
|
||||
.thumb_set I2C0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CT16B0_IRQHandler
|
||||
.thumb_set CT16B0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CT16B1_IRQHandler
|
||||
.thumb_set CT16B1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CT32B0_IRQHandler
|
||||
.thumb_set CT32B0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CT32B1_IRQHandler
|
||||
.thumb_set CT32B1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP0_IRQHandler
|
||||
.thumb_set SSP0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USART_IRQHandler
|
||||
.thumb_set USART_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USB_IRQHandler
|
||||
.thumb_set USB_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USB_FIQ_IRQHandler
|
||||
.thumb_set USB_FIQ_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ADC_A_IRQHandler
|
||||
.thumb_set ADC_A_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak BOD_WDT_IRQHandler
|
||||
.thumb_set BOD_WDT_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak DMA_IRQHandler
|
||||
.thumb_set DMA_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USBWAKEUP_IRQHandler
|
||||
.thumb_set USBWAKEUP_IRQHandler,Dummy_Handler
|
||||
|
||||
#else
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT0_IRQHandler
|
||||
PIN_INT0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT1_IRQHandler
|
||||
PIN_INT1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT2_IRQHandler
|
||||
PIN_INT2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT3_IRQHandler
|
||||
PIN_INT3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT4_IRQHandler
|
||||
PIN_INT4_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT5_IRQHandler
|
||||
PIN_INT5_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT6_IRQHandler
|
||||
PIN_INT6_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT7_IRQHandler
|
||||
PIN_INT7_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak GINT0_IRQHandler
|
||||
GINT0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak GINT1_IRQHandler
|
||||
GINT1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C1_IRQHandler
|
||||
I2C1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USART1_4_IRQHandler
|
||||
USART1_4_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USART2_3_IRQHandler
|
||||
USART2_3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SCT0_1_IRQHandler
|
||||
SCT0_1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP1_IRQHandler
|
||||
SSP1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C0_IRQHandler
|
||||
I2C0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CT16B0_IRQHandler
|
||||
CT16B0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CT16B1_IRQHandler
|
||||
CT16B1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CT32B0_IRQHandler
|
||||
CT32B0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CT32B1_IRQHandler
|
||||
CT32B1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP0_IRQHandler
|
||||
SSP0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USART_IRQHandler
|
||||
USART_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USB_IRQHandler
|
||||
USB_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USB_FIQ_IRQHandler
|
||||
USB_FIQ_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ADC_A_IRQHandler
|
||||
ADC_A_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak RTC_IRQHandler
|
||||
RTC_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak BOD_WDT_IRQHandler
|
||||
BOD_WDT_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak FLASH_IRQHandler
|
||||
FLASH_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak DMA_IRQHandler
|
||||
DMA_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USBWAKEUP_IRQHandler
|
||||
USBWAKEUP_IRQHandler:
|
||||
b .
|
||||
|
||||
#endif
|
||||
|
||||
/*****************************************************************************
|
||||
* Vector Table *
|
||||
*****************************************************************************/
|
||||
|
||||
.section .vectors, "ax"
|
||||
.align 2
|
||||
.global _vectors
|
||||
.extern __stack_end__
|
||||
.extern Reset_Handler
|
||||
|
||||
_vectors:
|
||||
.word __stack_end__
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word SVC_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word PIN_INT0_IRQHandler
|
||||
.word PIN_INT1_IRQHandler
|
||||
.word PIN_INT2_IRQHandler
|
||||
.word PIN_INT3_IRQHandler
|
||||
.word PIN_INT4_IRQHandler
|
||||
.word PIN_INT5_IRQHandler
|
||||
.word PIN_INT6_IRQHandler
|
||||
.word PIN_INT7_IRQHandler
|
||||
.word GINT0_IRQHandler
|
||||
.word GINT1_IRQHandler
|
||||
.word I2C1_IRQHandler
|
||||
.word USART1_4_IRQHandler
|
||||
.word USART2_3_IRQHandler
|
||||
.word SCT0_1_IRQHandler
|
||||
.word SSP1_IRQHandler
|
||||
.word I2C0_IRQHandler
|
||||
.word CT16B0_IRQHandler
|
||||
.word CT16B1_IRQHandler
|
||||
.word CT32B0_IRQHandler
|
||||
.word CT32B1_IRQHandler
|
||||
.word SSP0_IRQHandler
|
||||
.word USART_IRQHandler
|
||||
.word USB_IRQHandler
|
||||
.word USB_FIQ_IRQHandler
|
||||
.word ADC_A_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word BOD_WDT_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word DMA_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word USBWAKEUP_IRQHandler
|
||||
_vectors_end:
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
.section .vectors_ram, "ax"
|
||||
.align 2
|
||||
.global _vectors_ram
|
||||
|
||||
_vectors_ram:
|
||||
.space _vectors_end - _vectors, 0
|
||||
#endif
|
||||
@@ -0,0 +1,41 @@
|
||||
<!DOCTYPE Linker_Placement_File>
|
||||
<Root name="Flash Section Placement">
|
||||
<MemorySegment name="$(FLASH_NAME:FLASH)">
|
||||
<ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START:)" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init_rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".text" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".dtors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ctors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM_NAME:RAM);SRAM">
|
||||
<ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START:$(SRAM_START:))" />
|
||||
<ProgramSection alignment="4" load="No" name=".fast_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".data_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tbss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tdata_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".non_init" />
|
||||
<ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(FLASH2_NAME:FLASH2)">
|
||||
<ProgramSection alignment="4" load="Yes" name=".text2" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata2" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data2_run" name=".data2" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM2_NAME:RAM2)">
|
||||
<ProgramSection alignment="4" load="No" name=".data2_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss2" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM3_NAME:RAM3)">
|
||||
<ProgramSection alignment="4" load="No" name=".data3_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss3" />
|
||||
</MemorySegment>
|
||||
</Root>
|
||||
@@ -0,0 +1,124 @@
|
||||
<!DOCTYPE CrossStudio_Project_File>
|
||||
<solution Name="lpc11u6x" target="8" version="2">
|
||||
<project Name="lpc11u6x">
|
||||
<configuration
|
||||
CMSIS_CORE="Yes"
|
||||
Name="Common"
|
||||
Placement="Flash"
|
||||
Target="LPC11U68"
|
||||
arm_architecture="v6M"
|
||||
arm_core_type="Cortex-M0+"
|
||||
arm_endian="Little"
|
||||
arm_fpu_type="None"
|
||||
arm_interwork="No"
|
||||
arm_linker_heap_size="256"
|
||||
arm_linker_process_stack_size="0"
|
||||
arm_linker_stack_size="256"
|
||||
arm_simulator_memory_simulation_parameter="ROM;0x00000000;0x00040000;RAM;0x10000000;0x00008000;RAM;0x20000000;0x00000800"
|
||||
arm_target_debug_interface_type="ADIv5"
|
||||
arm_target_device_name="LPC11U68"
|
||||
arm_target_interface_type="SWD"
|
||||
build_treat_warnings_as_errors="Yes"
|
||||
c_preprocessor_definitions="__LPC11U68__;__LPC1100_FAMILY;__LPC11U00_SUBFAMILY;ARM_MATH_CM0PLUS;FLASH_PLACEMENT=1;CORE_M0PLUS;BOARD_LPCXPRESSO11U68;CFG_TUSB_MCU=OPT_MCU_LPC11UXX;CFG_TUSB_MEM_SECTION= __attribute__((section(".bss3")));CFG_TUSB_MEM_ALIGN=__attribute__ ((aligned(64)))"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)/inc"
|
||||
debug_register_definition_file="$(ProjectDir)/LPC11U6x_Registers.xml"
|
||||
debug_target_connection="J-Link"
|
||||
gcc_enable_all_warnings="Yes"
|
||||
gcc_entry_point="Reset_Handler"
|
||||
linker_memory_map_file="$(ProjectDir)/LPC11U68_MemoryMap.xml"
|
||||
linker_section_placement_file="$(ProjectDir)/flash_placement.xml"
|
||||
macros="DeviceFamily=LPC1100;DeviceSubFamily=LPC11U00;Target=LPC11U68;Placement=Flash;rootDir=../../../../..;lpcDir=../../../../../hw/mcu/nxp/lpc_chip_11u6x"
|
||||
project_directory=""
|
||||
project_type="Executable"
|
||||
target_reset_script="Reset();"
|
||||
target_script_file="$(ProjectDir)/LPC1100_Target.js"
|
||||
target_trace_initialize_script="EnableTrace("$(TraceInterfaceType)")" />
|
||||
<folder Name="System Files">
|
||||
<file file_name="thumb_crt0.s" />
|
||||
<file file_name="LPC1100_Startup.s" />
|
||||
<file file_name="LPC11U6x_Vectors.s">
|
||||
<configuration Name="Common" file_type="Assembly" />
|
||||
</file>
|
||||
<file file_name="LPC1100_Target.js">
|
||||
<configuration Name="Common" file_type="Reset Script" />
|
||||
</file>
|
||||
<file file_name="LPC11U68_MemoryMap.xml" />
|
||||
<file file_name="flash_placement.xml" />
|
||||
</folder>
|
||||
<configuration
|
||||
Name="LPCXpresso 11U68"
|
||||
link_use_linker_script_file="No"
|
||||
linker_section_placement_file="flash_placement.xml" />
|
||||
<folder Name="hw">
|
||||
<folder Name="bsp">
|
||||
<file file_name="../../../../../hw/bsp/ansi_escape.h" />
|
||||
<file file_name="../../../../../hw/bsp/board.h" />
|
||||
<folder
|
||||
Name="lpcxpresso11u68"
|
||||
exclude=""
|
||||
filter="*.*"
|
||||
path="../../../../../hw/bsp/lpcxpresso11u68"
|
||||
recurse="No" />
|
||||
</folder>
|
||||
<folder Name="mcu">
|
||||
<folder Name="nxp">
|
||||
<folder Name="lpc_chip_11u6x">
|
||||
<folder Name="inc">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/chip.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/clock_11u6x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/cmsis.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/core_cm0.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/core_cm0plus.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/core_cm3.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/core_cm4.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/core_cm4_simd.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/core_cmFunc.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/core_cmInstr.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/error.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/gpio_11u6x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/gpiogroup_11u6x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/iocon_11u6x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/lpc_types.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/sys_config.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/syscon_11u6x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/uart_0_11u6x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/inc/usbd_11u6x.h" />
|
||||
</folder>
|
||||
<folder Name="src">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/src/chip_11u6x.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/src/clock_11u6x.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/src/gpio_11u6x.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/src/syscon_11u6x.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/src/sysinit_11u6x.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/src/uart_0_11u6x.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_11u6x/src/iocon_11u6x.c" />
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
<folder
|
||||
Name="segger_rtt"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../lib/segger_rtt"
|
||||
recurse="No" />
|
||||
<folder
|
||||
Name="src"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../src"
|
||||
recurse="Yes" />
|
||||
<folder
|
||||
Name="tinyusb"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../src"
|
||||
recurse="Yes" />
|
||||
</project>
|
||||
<configuration
|
||||
Name="LPCXpresso 11U68"
|
||||
c_preprocessor_definitions="DEBUG"
|
||||
gcc_debugging_level="Level 3"
|
||||
gcc_optimization_level="None" />
|
||||
</solution>
|
||||
@@ -0,0 +1,415 @@
|
||||
// **********************************************************************
|
||||
// * SEGGER Microcontroller GmbH *
|
||||
// * The Embedded Experts *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * (c) 2014 - 2018 SEGGER Microcontroller GmbH *
|
||||
// * (c) 2001 - 2018 Rowley Associates Limited *
|
||||
// * *
|
||||
// * www.segger.com Support: support@segger.com *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * All rights reserved. *
|
||||
// * *
|
||||
// * Redistribution and use in source and binary forms, with or *
|
||||
// * without modification, are permitted provided that the following *
|
||||
// * conditions are met: *
|
||||
// * *
|
||||
// * - Redistributions of source code must retain the above copyright *
|
||||
// * notice, this list of conditions and the following disclaimer. *
|
||||
// * *
|
||||
// * - Neither the name of SEGGER Microcontroller GmbH *
|
||||
// * nor the names of its contributors may be used to endorse or *
|
||||
// * promote products derived from this software without specific *
|
||||
// * prior written permission. *
|
||||
// * *
|
||||
// * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
|
||||
// * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
|
||||
// * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
|
||||
// * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
|
||||
// * DISCLAIMED. *
|
||||
// * IN NO EVENT SHALL SEGGER Microcontroller GmbH BE LIABLE FOR *
|
||||
// * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
|
||||
// * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
|
||||
// * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
|
||||
// * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
|
||||
// * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
|
||||
// * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
|
||||
// * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
|
||||
// * DAMAGE. *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
//
|
||||
//
|
||||
// Preprocessor Definitions
|
||||
// ------------------------
|
||||
// APP_ENTRY_POINT
|
||||
//
|
||||
// Defines the application entry point function, if undefined this setting
|
||||
// defaults to "main".
|
||||
//
|
||||
// INITIALIZE_STACK
|
||||
//
|
||||
// If defined, the contents of the stack will be initialized to a the
|
||||
// value 0xCC.
|
||||
//
|
||||
// INITIALIZE_SECONDARY_SECTIONS
|
||||
//
|
||||
// If defined, the .data2, .text2, .rodata2 and .bss2 sections will be initialized.
|
||||
//
|
||||
// INITIALIZE_TCM_SECTIONS
|
||||
//
|
||||
// If defined, the .data_tcm, .text_tcm, .rodata_tcm and .bss_tcm sections
|
||||
// will be initialized.
|
||||
//
|
||||
// INITIALIZE_USER_SECTIONS
|
||||
//
|
||||
// If defined, the function InitializeUserMemorySections will be called prior
|
||||
// to entering main in order to allow the user to initialize any user defined
|
||||
// memory sections.
|
||||
//
|
||||
// FULL_LIBRARY
|
||||
//
|
||||
// If defined then
|
||||
// - argc, argv are setup by the debug_getargs.
|
||||
// - the exit symbol is defined and executes on return from main.
|
||||
// - the exit symbol calls destructors, atexit functions and then debug_exit.
|
||||
//
|
||||
// If not defined then
|
||||
// - argc and argv are zero.
|
||||
// - the exit symbol is defined, executes on return from main and loops
|
||||
//
|
||||
|
||||
#ifndef APP_ENTRY_POINT
|
||||
#define APP_ENTRY_POINT main
|
||||
#endif
|
||||
|
||||
#ifndef ARGSSPACE
|
||||
#define ARGSSPACE 128
|
||||
#endif
|
||||
.syntax unified
|
||||
|
||||
.global _start
|
||||
.extern APP_ENTRY_POINT
|
||||
.global exit
|
||||
.weak exit
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
.extern InitializeUserMemorySections
|
||||
#endif
|
||||
|
||||
.section .init, "ax"
|
||||
.code 16
|
||||
.balign 2
|
||||
.thumb_func
|
||||
|
||||
_start:
|
||||
/* Set up main stack if size > 0 */
|
||||
ldr r1, =__stack_end__
|
||||
ldr r0, =__stack_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
mov sp, r1
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
ldr r0, =__stack_start__
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Set up process stack if size > 0 */
|
||||
ldr r1, =__stack_process_end__
|
||||
ldr r0, =__stack_process_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
msr psp, r1
|
||||
movs r2, #2
|
||||
msr control, r2
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Copy initialized memory sections into RAM (if necessary). */
|
||||
ldr r0, =__data_load_start__
|
||||
ldr r1, =__data_start__
|
||||
ldr r2, =__data_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_load_start__
|
||||
ldr r1, =__text_start__
|
||||
ldr r2, =__text_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__fast_load_start__
|
||||
ldr r1, =__fast_start__
|
||||
ldr r2, =__fast_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__ctors_load_start__
|
||||
ldr r1, =__ctors_start__
|
||||
ldr r2, =__ctors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__dtors_load_start__
|
||||
ldr r1, =__dtors_start__
|
||||
ldr r2, =__dtors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_load_start__
|
||||
ldr r1, =__rodata_start__
|
||||
ldr r2, =__rodata_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__tdata_load_start__
|
||||
ldr r1, =__tdata_start__
|
||||
ldr r2, =__tdata_end__
|
||||
bl memory_copy
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__data2_load_start__
|
||||
ldr r1, =__data2_start__
|
||||
ldr r2, =__data2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text2_load_start__
|
||||
ldr r1, =__text2_start__
|
||||
ldr r2, =__text2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata2_load_start__
|
||||
ldr r1, =__rodata2_start__
|
||||
ldr r2, =__rodata2_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__data_tcm_load_start__
|
||||
ldr r1, =__data_tcm_start__
|
||||
ldr r2, =__data_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_tcm_load_start__
|
||||
ldr r1, =__text_tcm_start__
|
||||
ldr r2, =__text_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_tcm_load_start__
|
||||
ldr r1, =__rodata_tcm_start__
|
||||
ldr r2, =__rodata_tcm_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Zero the bss. */
|
||||
ldr r0, =__bss_start__
|
||||
ldr r1, =__bss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
ldr r0, =__tbss_start__
|
||||
ldr r1, =__tbss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__bss2_start__
|
||||
ldr r1, =__bss2_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__bss_tcm_start__
|
||||
ldr r1, =__bss_tcm_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Initialize the heap */
|
||||
ldr r0, = __heap_start__
|
||||
ldr r1, = __heap_end__
|
||||
subs r1, r1, r0
|
||||
cmp r1, #8
|
||||
blt 1f
|
||||
movs r2, #0
|
||||
str r2, [r0]
|
||||
adds r0, r0, #4
|
||||
str r1, [r0]
|
||||
1:
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
ldr r2, =InitializeUserMemorySections
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Call constructors */
|
||||
ldr r0, =__ctors_start__
|
||||
ldr r1, =__ctors_end__
|
||||
ctor_loop:
|
||||
cmp r0, r1
|
||||
beq ctor_end
|
||||
ldr r2, [r0]
|
||||
adds r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b ctor_loop
|
||||
ctor_end:
|
||||
|
||||
/* Setup initial call frame */
|
||||
movs r0, #0
|
||||
mov lr, r0
|
||||
mov r12, sp
|
||||
|
||||
.type start, function
|
||||
start:
|
||||
/* Jump to application entry point */
|
||||
#ifdef FULL_LIBRARY
|
||||
movs r0, #ARGSSPACE
|
||||
ldr r1, =args
|
||||
ldr r2, =debug_getargs
|
||||
blx r2
|
||||
ldr r1, =args
|
||||
#else
|
||||
movs r0, #0
|
||||
movs r1, #0
|
||||
#endif
|
||||
ldr r2, =APP_ENTRY_POINT
|
||||
blx r2
|
||||
|
||||
.thumb_func
|
||||
exit:
|
||||
#ifdef FULL_LIBRARY
|
||||
mov r5, r0 // save the exit parameter/return result
|
||||
|
||||
/* Call destructors */
|
||||
ldr r0, =__dtors_start__
|
||||
ldr r1, =__dtors_end__
|
||||
dtor_loop:
|
||||
cmp r0, r1
|
||||
beq dtor_end
|
||||
ldr r2, [r0]
|
||||
add r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b dtor_loop
|
||||
dtor_end:
|
||||
|
||||
/* Call atexit functions */
|
||||
ldr r2, =_execute_at_exit_fns
|
||||
blx r2
|
||||
|
||||
/* Call debug_exit with return result/exit parameter */
|
||||
mov r0, r5
|
||||
ldr r2, =debug_exit
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Returned from application entry point, loop forever. */
|
||||
exit_loop:
|
||||
b exit_loop
|
||||
|
||||
.thumb_func
|
||||
memory_copy:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
subs r2, r2, r1
|
||||
beq 2f
|
||||
1:
|
||||
ldrb r3, [r0]
|
||||
adds r0, r0, #1
|
||||
strb r3, [r1]
|
||||
adds r1, r1, #1
|
||||
subs r2, r2, #1
|
||||
bne 1b
|
||||
2:
|
||||
bx lr
|
||||
|
||||
.thumb_func
|
||||
memory_set:
|
||||
cmp r0, r1
|
||||
beq 1f
|
||||
strb r2, [r0]
|
||||
adds r0, r0, #1
|
||||
b memory_set
|
||||
1:
|
||||
bx lr
|
||||
|
||||
// default C/C++ library helpers
|
||||
|
||||
.macro HELPER helper_name
|
||||
.section .text.\helper_name, "ax", %progbits
|
||||
.balign 2
|
||||
.global \helper_name
|
||||
.weak \helper_name
|
||||
\helper_name:
|
||||
.thumb_func
|
||||
.endm
|
||||
|
||||
.macro JUMPTO name
|
||||
#if defined(__thumb__) && !defined(__thumb2__)
|
||||
mov r12, r0
|
||||
ldr r0, =\name
|
||||
push {r0}
|
||||
mov r0, r12
|
||||
pop {pc}
|
||||
#else
|
||||
b \name
|
||||
#endif
|
||||
.endm
|
||||
|
||||
HELPER __aeabi_read_tp
|
||||
ldr r0, =__tbss_start__-8
|
||||
bx lr
|
||||
HELPER abort
|
||||
b .
|
||||
HELPER __assert
|
||||
b .
|
||||
HELPER __aeabi_assert
|
||||
b .
|
||||
HELPER __sync_synchronize
|
||||
bx lr
|
||||
HELPER __getchar
|
||||
JUMPTO debug_getchar
|
||||
HELPER __putchar
|
||||
JUMPTO debug_putchar
|
||||
HELPER __open
|
||||
JUMPTO debug_fopen
|
||||
HELPER __close
|
||||
JUMPTO debug_fclose
|
||||
HELPER __write
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fwrite
|
||||
HELPER __read
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fread
|
||||
HELPER __seek
|
||||
push {r4, lr}
|
||||
mov r4, r0
|
||||
bl debug_fseek
|
||||
cmp r0, #0
|
||||
bne 1f
|
||||
mov r0, r4
|
||||
bl debug_ftell
|
||||
pop {r4, pc}
|
||||
1:
|
||||
ldr r0, =-1
|
||||
pop {r4, pc}
|
||||
// char __user_locale_name_buffer[];
|
||||
.section .bss.__user_locale_name_buffer, "aw", %nobits
|
||||
.global __user_locale_name_buffer
|
||||
.weak __user_locale_name_buffer
|
||||
__user_locale_name_buffer:
|
||||
.word 0x0
|
||||
|
||||
#ifdef FULL_LIBRARY
|
||||
.bss
|
||||
args:
|
||||
.space ARGSSPACE
|
||||
#endif
|
||||
|
||||
/* Setup attibutes of stack and heap sections so they don't take up room in the elf file */
|
||||
.section .stack, "wa", %nobits
|
||||
.section .stack_process, "wa", %nobits
|
||||
.section .heap, "wa", %nobits
|
||||
|
||||
@@ -0,0 +1,113 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2017 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* NO_STACK_INIT *
|
||||
* *
|
||||
* If defined, the stack pointer will not be initialised. *
|
||||
* *
|
||||
* NO_SYSTEM_INIT *
|
||||
* *
|
||||
* If defined, the SystemInit() function will not be called. By default *
|
||||
* SystemInit() is called after reset to enable the clocks and memories to *
|
||||
* be initialised prior to any C startup initialisation. *
|
||||
* *
|
||||
* NO_VTOR_CONFIG *
|
||||
* *
|
||||
* If defined, the vector table offset register will not be configured. *
|
||||
* *
|
||||
* MEMORY_INIT *
|
||||
* *
|
||||
* If defined, the MemoryInit() function will be called. By default *
|
||||
* MemoryInit() is called after SystemInit() to enable an external memory *
|
||||
* controller. *
|
||||
* *
|
||||
* STACK_INIT_VAL *
|
||||
* *
|
||||
* If defined, specifies the initial stack pointer value. If undefined, *
|
||||
* the stack pointer will be initialised to point to the end of the *
|
||||
* RAM segment. *
|
||||
* *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, the exception vectors will be copied from Flash to RAM. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
|
||||
.global Reset_Handler
|
||||
.extern _vectors
|
||||
|
||||
.section .init, "ax"
|
||||
.thumb_func
|
||||
|
||||
.equ VTOR_REG, 0xE000ED08
|
||||
|
||||
#ifndef STACK_INIT_VAL
|
||||
#define STACK_INIT_VAL __RAM_segment_end__
|
||||
#endif
|
||||
|
||||
Reset_Handler:
|
||||
#ifndef NO_STACK_INIT
|
||||
/* Initialise main stack */
|
||||
ldr r0, =STACK_INIT_VAL
|
||||
bic r0, #0x7
|
||||
mov sp, r0
|
||||
#endif
|
||||
|
||||
#ifndef NO_SYSTEM_INIT
|
||||
/* Initialise system */
|
||||
ldr r0, =SystemInit
|
||||
blx r0
|
||||
.pushsection .init_array, "aw", %init_array
|
||||
.word SystemCoreClockUpdate
|
||||
.popsection
|
||||
#endif
|
||||
|
||||
#ifdef MEMORY_INIT
|
||||
ldr r0, =MemoryInit
|
||||
blx r0
|
||||
#endif
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
/* Copy exception vectors into RAM */
|
||||
ldr r0, =__vectors_start__
|
||||
ldr r1, =__vectors_end__
|
||||
ldr r2, =__vectors_ram_start__
|
||||
1:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
ldr r3, [r0]
|
||||
str r3, [r2]
|
||||
adds r0, r0, #4
|
||||
adds r2, r2, #4
|
||||
b 1b
|
||||
2:
|
||||
#endif
|
||||
|
||||
#ifndef NO_VTOR_CONFIG
|
||||
/* Configure vector table offset register */
|
||||
ldr r0, =VTOR_REG
|
||||
#ifdef VECTORS_IN_RAM
|
||||
ldr r1, =_vectors_ram
|
||||
#else
|
||||
ldr r1, =_vectors
|
||||
#endif
|
||||
str r1, [r0]
|
||||
#endif
|
||||
|
||||
/* Jump to program start */
|
||||
b _start
|
||||
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2017 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
function Reset() {
|
||||
TargetInterface.resetAndStop();
|
||||
}
|
||||
|
||||
function EnableTrace(traceInterfaceType) {
|
||||
// TODO: Enable trace
|
||||
}
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
<!DOCTYPE Board_Memory_Definition_File>
|
||||
<root name="LPC1347FBD64">
|
||||
<MemorySegment name="FLASH" start="0x00000000" size="0x00010000" access="ReadOnly" />
|
||||
<MemorySegment name="RAM" start="0x10000000" size="0x00002000" access="Read/Write" />
|
||||
<MemorySegment name="RAM2" start="0x20000000" size="0x00000800" access="Read/Write" />
|
||||
<MemorySegment name="RAM3" start="0x20004000" size="0x00000800" access="Read/Write" />
|
||||
</root>
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,342 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2017 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, an area of RAM will large enough to store the vector table *
|
||||
* will be reserved. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
.code 16
|
||||
|
||||
.section .init, "ax"
|
||||
.align 0
|
||||
|
||||
/*****************************************************************************
|
||||
* Default Exception Handlers *
|
||||
*****************************************************************************/
|
||||
|
||||
.thumb_func
|
||||
.weak NMI_Handler
|
||||
NMI_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak HardFault_Handler
|
||||
HardFault_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SVC_Handler
|
||||
SVC_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PendSV_Handler
|
||||
PendSV_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SysTick_Handler
|
||||
SysTick_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
Dummy_Handler:
|
||||
b .
|
||||
|
||||
#if defined(__OPTIMIZATION_SMALL)
|
||||
|
||||
.weak PIN_INT0_IRQHandler
|
||||
.thumb_set PIN_INT0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT1_IRQHandler
|
||||
.thumb_set PIN_INT1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT2_IRQHandler
|
||||
.thumb_set PIN_INT2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT3_IRQHandler
|
||||
.thumb_set PIN_INT3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT4_IRQHandler
|
||||
.thumb_set PIN_INT4_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT5_IRQHandler
|
||||
.thumb_set PIN_INT5_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT6_IRQHandler
|
||||
.thumb_set PIN_INT6_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT7_IRQHandler
|
||||
.thumb_set PIN_INT7_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak GINT0_IRQHandler
|
||||
.thumb_set GINT0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak GINT1_IRQHandler
|
||||
.thumb_set GINT1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak RIT_IRQHandler
|
||||
.thumb_set RIT_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP1_IRQHandler
|
||||
.thumb_set SSP1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C_IRQHandler
|
||||
.thumb_set I2C_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CT16B0_IRQHandler
|
||||
.thumb_set CT16B0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CT16B1_IRQHandler
|
||||
.thumb_set CT16B1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CT32B0_IRQHandler
|
||||
.thumb_set CT32B0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CT32B1_IRQHandler
|
||||
.thumb_set CT32B1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP0_IRQHandler
|
||||
.thumb_set SSP0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USART_IRQHandler
|
||||
.thumb_set USART_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USB_IRQHandler
|
||||
.thumb_set USB_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USB_FIQ_IRQHandler
|
||||
.thumb_set USB_FIQ_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak WWDT_IRQHandler
|
||||
.thumb_set WWDT_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak BOD_IRQHandler
|
||||
.thumb_set BOD_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USBWAKEUP_IRQHandler
|
||||
.thumb_set USBWAKEUP_IRQHandler,Dummy_Handler
|
||||
|
||||
#else
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT0_IRQHandler
|
||||
PIN_INT0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT1_IRQHandler
|
||||
PIN_INT1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT2_IRQHandler
|
||||
PIN_INT2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT3_IRQHandler
|
||||
PIN_INT3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT4_IRQHandler
|
||||
PIN_INT4_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT5_IRQHandler
|
||||
PIN_INT5_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT6_IRQHandler
|
||||
PIN_INT6_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT7_IRQHandler
|
||||
PIN_INT7_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak GINT0_IRQHandler
|
||||
GINT0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak GINT1_IRQHandler
|
||||
GINT1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak RIT_IRQHandler
|
||||
RIT_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP1_IRQHandler
|
||||
SSP1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C_IRQHandler
|
||||
I2C_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CT16B0_IRQHandler
|
||||
CT16B0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CT16B1_IRQHandler
|
||||
CT16B1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CT32B0_IRQHandler
|
||||
CT32B0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CT32B1_IRQHandler
|
||||
CT32B1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP0_IRQHandler
|
||||
SSP0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USART_IRQHandler
|
||||
USART_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USB_IRQHandler
|
||||
USB_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USB_FIQ_IRQHandler
|
||||
USB_FIQ_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ADC_IRQHandler
|
||||
ADC_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak WWDT_IRQHandler
|
||||
WWDT_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak BOD_IRQHandler
|
||||
BOD_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak FLASH_IRQHandler
|
||||
FLASH_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USBWAKEUP_IRQHandler
|
||||
USBWAKEUP_IRQHandler:
|
||||
b .
|
||||
|
||||
#endif
|
||||
|
||||
/*****************************************************************************
|
||||
* Vector Table *
|
||||
*****************************************************************************/
|
||||
|
||||
.section .vectors, "ax"
|
||||
.align 0
|
||||
.global _vectors
|
||||
.extern __stack_end__
|
||||
.extern Reset_Handler
|
||||
|
||||
_vectors:
|
||||
.word __stack_end__
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word SVC_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word PIN_INT0_IRQHandler
|
||||
.word PIN_INT1_IRQHandler
|
||||
.word PIN_INT2_IRQHandler
|
||||
.word PIN_INT3_IRQHandler
|
||||
.word PIN_INT4_IRQHandler
|
||||
.word PIN_INT5_IRQHandler
|
||||
.word PIN_INT6_IRQHandler
|
||||
.word PIN_INT7_IRQHandler
|
||||
.word GINT0_IRQHandler
|
||||
.word GINT1_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word RIT_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word SSP1_IRQHandler
|
||||
.word I2C_IRQHandler
|
||||
.word CT16B0_IRQHandler
|
||||
.word CT16B1_IRQHandler
|
||||
.word CT32B0_IRQHandler
|
||||
.word CT32B1_IRQHandler
|
||||
.word SSP0_IRQHandler
|
||||
.word USART_IRQHandler
|
||||
.word USB_IRQHandler
|
||||
.word USB_FIQ_IRQHandler
|
||||
.word ADC_IRQHandler
|
||||
.word WWDT_IRQHandler
|
||||
.word BOD_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word USBWAKEUP_IRQHandler
|
||||
_vectors_end:
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
.section .vectors_ram, "ax"
|
||||
.align 0
|
||||
.global _vectors_ram
|
||||
|
||||
_vectors_ram:
|
||||
.space _vectors_end - _vectors, 0
|
||||
#endif
|
||||
@@ -0,0 +1,41 @@
|
||||
<!DOCTYPE Linker_Placement_File>
|
||||
<Root name="Flash Section Placement">
|
||||
<MemorySegment name="$(FLASH_NAME:FLASH)">
|
||||
<ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START:)" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init_rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".text" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".dtors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ctors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM_NAME:RAM);SRAM">
|
||||
<ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START:$(SRAM_START:))" />
|
||||
<ProgramSection alignment="4" load="No" name=".fast_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".data_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tbss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tdata_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".non_init" />
|
||||
<ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(FLASH2_NAME:FLASH2)">
|
||||
<ProgramSection alignment="4" load="Yes" name=".text2" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata2" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data2_run" name=".data2" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM2_NAME:RAM2)">
|
||||
<ProgramSection alignment="4" load="No" name=".data2_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss2" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM3_NAME:RAM3)">
|
||||
<ProgramSection alignment="4" load="No" name=".data3_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss3" />
|
||||
</MemorySegment>
|
||||
</Root>
|
||||
@@ -0,0 +1,116 @@
|
||||
<!DOCTYPE CrossStudio_Project_File>
|
||||
<solution Name="lpc13xx" target="8" version="2">
|
||||
<project Name="lpc13xx">
|
||||
<configuration
|
||||
Name="Common"
|
||||
Placement="Flash"
|
||||
Target="LPC1347FBD64"
|
||||
arm_architecture="v7M"
|
||||
arm_core_type="Cortex-M3"
|
||||
arm_endian="Little"
|
||||
arm_fpu_type="None"
|
||||
arm_interwork="No"
|
||||
arm_linker_heap_size="0"
|
||||
arm_linker_process_stack_size="0"
|
||||
arm_linker_stack_size="256"
|
||||
arm_simulator_memory_simulation_parameter="ROM;0x00000000;0x00010000;RAM;0x10000000;0x00002000;RAM;0x20000000;0x00000800"
|
||||
arm_target_debug_interface_type="ADIv5"
|
||||
arm_target_device_name="LPC1347"
|
||||
arm_target_interface_type="SWD"
|
||||
build_treat_warnings_as_errors="Yes"
|
||||
c_preprocessor_definitions="__LPC1347FBD64__;__LPC1300_FAMILY;__LPC134x_SUBFAMILY;ARM_MATH_CM3;FLASH_PLACEMENT=1;CORE_M3;BOARD_LPCXPRESSO1347;CFG_TUSB_MCU=OPT_MCU_LPC13XX;CFG_TUSB_MEM_SECTION= __attribute__((section(".bss3")));CFG_TUSB_MEM_ALIGN=__attribute__ ((aligned(64)))"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)/inc"
|
||||
debug_register_definition_file="$(ProjectDir)/LPC13Uxx_Registers.xml"
|
||||
debug_target_connection="J-Link"
|
||||
gcc_enable_all_warnings="Yes"
|
||||
gcc_entry_point="Reset_Handler"
|
||||
linker_memory_map_file="$(ProjectDir)/LPC1347FBD64_MemoryMap.xml"
|
||||
linker_section_placement_file="$(ProjectDir)/flash_placement.xml"
|
||||
macros="DeviceFamily=LPC1300;DeviceSubFamily=LPC134x;Target=LPC1347FBD64;Placement=Flash;rootDir=../../../../..;lpcDir=../../../../../hw/mcu/nxp/lpc_chip_13xx"
|
||||
package_dependencies="LPC1300"
|
||||
project_directory=""
|
||||
project_type="Executable"
|
||||
target_reset_script="Reset();"
|
||||
target_trace_initialize_script="EnableTrace("$(TraceInterfaceType)")" />
|
||||
<folder Name="System Files">
|
||||
<file file_name="thumb_crt0.s" />
|
||||
<file file_name="LPC1300_Startup.s" />
|
||||
<file file_name="LPC13Uxx_Vectors.s">
|
||||
<configuration Name="Common" file_type="Assembly" />
|
||||
</file>
|
||||
<file file_name="LPC1300_Target.js">
|
||||
<configuration Name="Common" file_type="Reset Script" />
|
||||
</file>
|
||||
<file file_name="LPC1347FBD64_MemoryMap.xml" />
|
||||
<file file_name="flash_placement.xml" />
|
||||
</folder>
|
||||
<configuration
|
||||
Name="Debug"
|
||||
link_use_linker_script_file="No"
|
||||
linker_section_placement_file="flash_placement.xml" />
|
||||
<folder Name="hw">
|
||||
<folder Name="bsp">
|
||||
<file file_name="../../../../../hw/bsp/ansi_escape.h" />
|
||||
<file file_name="../../../../../hw/bsp/board.h" />
|
||||
<folder Name="lpcxpresso1347">
|
||||
<file file_name="../../../../../hw/bsp/lpcxpresso1347/board_lpcxpresso1347.c" />
|
||||
<file file_name="../../../../../hw/bsp/lpcxpresso1347/board_lpcxpresso1347.h" />
|
||||
</folder>
|
||||
</folder>
|
||||
<folder Name="mcu">
|
||||
<folder Name="nxp">
|
||||
<folder Name="lpc_chip_13xx">
|
||||
<folder Name="inc">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/chip.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/clock_13xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/cmsis.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/cmsis_1347.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/core_cm3.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/core_cmFunc.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/core_cmInstr.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/gpio_13xx_1.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/gpio_13xx_2.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/iocon_13xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/lpc_types.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/sys_config.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/sysctl_13xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/inc/uart_13xx.h" />
|
||||
</folder>
|
||||
<folder Name="src">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/src/chip_13xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/src/clock_13xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/src/gpio_13xx_1.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/src/sysctl_13xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/src/sysinit_13xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/src/uart_13xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_13xx/src/iocon_13xx.c" />
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
<folder
|
||||
Name="src"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../src"
|
||||
recurse="Yes" />
|
||||
<folder
|
||||
Name="tinyusb"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../src"
|
||||
recurse="Yes" />
|
||||
<folder
|
||||
Name="segger_rtt"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../lib/segger_rtt"
|
||||
recurse="No" />
|
||||
</project>
|
||||
<configuration
|
||||
Name="LPCXpresso 1347"
|
||||
c_preprocessor_definitions="DEBUG"
|
||||
gcc_debugging_level="Level 3"
|
||||
gcc_optimization_level="None" />
|
||||
</solution>
|
||||
@@ -0,0 +1,415 @@
|
||||
// **********************************************************************
|
||||
// * SEGGER Microcontroller GmbH *
|
||||
// * The Embedded Experts *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * (c) 2014 - 2018 SEGGER Microcontroller GmbH *
|
||||
// * (c) 2001 - 2018 Rowley Associates Limited *
|
||||
// * *
|
||||
// * www.segger.com Support: support@segger.com *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * All rights reserved. *
|
||||
// * *
|
||||
// * Redistribution and use in source and binary forms, with or *
|
||||
// * without modification, are permitted provided that the following *
|
||||
// * conditions are met: *
|
||||
// * *
|
||||
// * - Redistributions of source code must retain the above copyright *
|
||||
// * notice, this list of conditions and the following disclaimer. *
|
||||
// * *
|
||||
// * - Neither the name of SEGGER Microcontroller GmbH *
|
||||
// * nor the names of its contributors may be used to endorse or *
|
||||
// * promote products derived from this software without specific *
|
||||
// * prior written permission. *
|
||||
// * *
|
||||
// * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
|
||||
// * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
|
||||
// * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
|
||||
// * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
|
||||
// * DISCLAIMED. *
|
||||
// * IN NO EVENT SHALL SEGGER Microcontroller GmbH BE LIABLE FOR *
|
||||
// * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
|
||||
// * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
|
||||
// * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
|
||||
// * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
|
||||
// * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
|
||||
// * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
|
||||
// * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
|
||||
// * DAMAGE. *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
//
|
||||
//
|
||||
// Preprocessor Definitions
|
||||
// ------------------------
|
||||
// APP_ENTRY_POINT
|
||||
//
|
||||
// Defines the application entry point function, if undefined this setting
|
||||
// defaults to "main".
|
||||
//
|
||||
// INITIALIZE_STACK
|
||||
//
|
||||
// If defined, the contents of the stack will be initialized to a the
|
||||
// value 0xCC.
|
||||
//
|
||||
// INITIALIZE_SECONDARY_SECTIONS
|
||||
//
|
||||
// If defined, the .data2, .text2, .rodata2 and .bss2 sections will be initialized.
|
||||
//
|
||||
// INITIALIZE_TCM_SECTIONS
|
||||
//
|
||||
// If defined, the .data_tcm, .text_tcm, .rodata_tcm and .bss_tcm sections
|
||||
// will be initialized.
|
||||
//
|
||||
// INITIALIZE_USER_SECTIONS
|
||||
//
|
||||
// If defined, the function InitializeUserMemorySections will be called prior
|
||||
// to entering main in order to allow the user to initialize any user defined
|
||||
// memory sections.
|
||||
//
|
||||
// FULL_LIBRARY
|
||||
//
|
||||
// If defined then
|
||||
// - argc, argv are setup by the debug_getargs.
|
||||
// - the exit symbol is defined and executes on return from main.
|
||||
// - the exit symbol calls destructors, atexit functions and then debug_exit.
|
||||
//
|
||||
// If not defined then
|
||||
// - argc and argv are zero.
|
||||
// - the exit symbol is defined, executes on return from main and loops
|
||||
//
|
||||
|
||||
#ifndef APP_ENTRY_POINT
|
||||
#define APP_ENTRY_POINT main
|
||||
#endif
|
||||
|
||||
#ifndef ARGSSPACE
|
||||
#define ARGSSPACE 128
|
||||
#endif
|
||||
.syntax unified
|
||||
|
||||
.global _start
|
||||
.extern APP_ENTRY_POINT
|
||||
.global exit
|
||||
.weak exit
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
.extern InitializeUserMemorySections
|
||||
#endif
|
||||
|
||||
.section .init, "ax"
|
||||
.code 16
|
||||
.balign 2
|
||||
.thumb_func
|
||||
|
||||
_start:
|
||||
/* Set up main stack if size > 0 */
|
||||
ldr r1, =__stack_end__
|
||||
ldr r0, =__stack_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
mov sp, r1
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
ldr r0, =__stack_start__
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Set up process stack if size > 0 */
|
||||
ldr r1, =__stack_process_end__
|
||||
ldr r0, =__stack_process_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
msr psp, r1
|
||||
movs r2, #2
|
||||
msr control, r2
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Copy initialized memory sections into RAM (if necessary). */
|
||||
ldr r0, =__data_load_start__
|
||||
ldr r1, =__data_start__
|
||||
ldr r2, =__data_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_load_start__
|
||||
ldr r1, =__text_start__
|
||||
ldr r2, =__text_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__fast_load_start__
|
||||
ldr r1, =__fast_start__
|
||||
ldr r2, =__fast_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__ctors_load_start__
|
||||
ldr r1, =__ctors_start__
|
||||
ldr r2, =__ctors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__dtors_load_start__
|
||||
ldr r1, =__dtors_start__
|
||||
ldr r2, =__dtors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_load_start__
|
||||
ldr r1, =__rodata_start__
|
||||
ldr r2, =__rodata_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__tdata_load_start__
|
||||
ldr r1, =__tdata_start__
|
||||
ldr r2, =__tdata_end__
|
||||
bl memory_copy
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__data2_load_start__
|
||||
ldr r1, =__data2_start__
|
||||
ldr r2, =__data2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text2_load_start__
|
||||
ldr r1, =__text2_start__
|
||||
ldr r2, =__text2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata2_load_start__
|
||||
ldr r1, =__rodata2_start__
|
||||
ldr r2, =__rodata2_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__data_tcm_load_start__
|
||||
ldr r1, =__data_tcm_start__
|
||||
ldr r2, =__data_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_tcm_load_start__
|
||||
ldr r1, =__text_tcm_start__
|
||||
ldr r2, =__text_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_tcm_load_start__
|
||||
ldr r1, =__rodata_tcm_start__
|
||||
ldr r2, =__rodata_tcm_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Zero the bss. */
|
||||
ldr r0, =__bss_start__
|
||||
ldr r1, =__bss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
ldr r0, =__tbss_start__
|
||||
ldr r1, =__tbss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__bss2_start__
|
||||
ldr r1, =__bss2_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__bss_tcm_start__
|
||||
ldr r1, =__bss_tcm_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Initialize the heap */
|
||||
ldr r0, = __heap_start__
|
||||
ldr r1, = __heap_end__
|
||||
subs r1, r1, r0
|
||||
cmp r1, #8
|
||||
blt 1f
|
||||
movs r2, #0
|
||||
str r2, [r0]
|
||||
adds r0, r0, #4
|
||||
str r1, [r0]
|
||||
1:
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
ldr r2, =InitializeUserMemorySections
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Call constructors */
|
||||
ldr r0, =__ctors_start__
|
||||
ldr r1, =__ctors_end__
|
||||
ctor_loop:
|
||||
cmp r0, r1
|
||||
beq ctor_end
|
||||
ldr r2, [r0]
|
||||
adds r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b ctor_loop
|
||||
ctor_end:
|
||||
|
||||
/* Setup initial call frame */
|
||||
movs r0, #0
|
||||
mov lr, r0
|
||||
mov r12, sp
|
||||
|
||||
.type start, function
|
||||
start:
|
||||
/* Jump to application entry point */
|
||||
#ifdef FULL_LIBRARY
|
||||
movs r0, #ARGSSPACE
|
||||
ldr r1, =args
|
||||
ldr r2, =debug_getargs
|
||||
blx r2
|
||||
ldr r1, =args
|
||||
#else
|
||||
movs r0, #0
|
||||
movs r1, #0
|
||||
#endif
|
||||
ldr r2, =APP_ENTRY_POINT
|
||||
blx r2
|
||||
|
||||
.thumb_func
|
||||
exit:
|
||||
#ifdef FULL_LIBRARY
|
||||
mov r5, r0 // save the exit parameter/return result
|
||||
|
||||
/* Call destructors */
|
||||
ldr r0, =__dtors_start__
|
||||
ldr r1, =__dtors_end__
|
||||
dtor_loop:
|
||||
cmp r0, r1
|
||||
beq dtor_end
|
||||
ldr r2, [r0]
|
||||
add r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b dtor_loop
|
||||
dtor_end:
|
||||
|
||||
/* Call atexit functions */
|
||||
ldr r2, =_execute_at_exit_fns
|
||||
blx r2
|
||||
|
||||
/* Call debug_exit with return result/exit parameter */
|
||||
mov r0, r5
|
||||
ldr r2, =debug_exit
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Returned from application entry point, loop forever. */
|
||||
exit_loop:
|
||||
b exit_loop
|
||||
|
||||
.thumb_func
|
||||
memory_copy:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
subs r2, r2, r1
|
||||
beq 2f
|
||||
1:
|
||||
ldrb r3, [r0]
|
||||
adds r0, r0, #1
|
||||
strb r3, [r1]
|
||||
adds r1, r1, #1
|
||||
subs r2, r2, #1
|
||||
bne 1b
|
||||
2:
|
||||
bx lr
|
||||
|
||||
.thumb_func
|
||||
memory_set:
|
||||
cmp r0, r1
|
||||
beq 1f
|
||||
strb r2, [r0]
|
||||
adds r0, r0, #1
|
||||
b memory_set
|
||||
1:
|
||||
bx lr
|
||||
|
||||
// default C/C++ library helpers
|
||||
|
||||
.macro HELPER helper_name
|
||||
.section .text.\helper_name, "ax", %progbits
|
||||
.balign 2
|
||||
.global \helper_name
|
||||
.weak \helper_name
|
||||
\helper_name:
|
||||
.thumb_func
|
||||
.endm
|
||||
|
||||
.macro JUMPTO name
|
||||
#if defined(__thumb__) && !defined(__thumb2__)
|
||||
mov r12, r0
|
||||
ldr r0, =\name
|
||||
push {r0}
|
||||
mov r0, r12
|
||||
pop {pc}
|
||||
#else
|
||||
b \name
|
||||
#endif
|
||||
.endm
|
||||
|
||||
HELPER __aeabi_read_tp
|
||||
ldr r0, =__tbss_start__-8
|
||||
bx lr
|
||||
HELPER abort
|
||||
b .
|
||||
HELPER __assert
|
||||
b .
|
||||
HELPER __aeabi_assert
|
||||
b .
|
||||
HELPER __sync_synchronize
|
||||
bx lr
|
||||
HELPER __getchar
|
||||
JUMPTO debug_getchar
|
||||
HELPER __putchar
|
||||
JUMPTO debug_putchar
|
||||
HELPER __open
|
||||
JUMPTO debug_fopen
|
||||
HELPER __close
|
||||
JUMPTO debug_fclose
|
||||
HELPER __write
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fwrite
|
||||
HELPER __read
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fread
|
||||
HELPER __seek
|
||||
push {r4, lr}
|
||||
mov r4, r0
|
||||
bl debug_fseek
|
||||
cmp r0, #0
|
||||
bne 1f
|
||||
mov r0, r4
|
||||
bl debug_ftell
|
||||
pop {r4, pc}
|
||||
1:
|
||||
ldr r0, =-1
|
||||
pop {r4, pc}
|
||||
// char __user_locale_name_buffer[];
|
||||
.section .bss.__user_locale_name_buffer, "aw", %nobits
|
||||
.global __user_locale_name_buffer
|
||||
.weak __user_locale_name_buffer
|
||||
__user_locale_name_buffer:
|
||||
.word 0x0
|
||||
|
||||
#ifdef FULL_LIBRARY
|
||||
.bss
|
||||
args:
|
||||
.space ARGSSPACE
|
||||
#endif
|
||||
|
||||
/* Setup attibutes of stack and heap sections so they don't take up room in the elf file */
|
||||
.section .stack, "wa", %nobits
|
||||
.section .stack_process, "wa", %nobits
|
||||
.section .heap, "wa", %nobits
|
||||
|
||||
@@ -0,0 +1,109 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2015 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* NO_STACK_INIT *
|
||||
* *
|
||||
* If defined, the stack pointer will not be initialised. *
|
||||
* *
|
||||
* NO_SYSTEM_INIT *
|
||||
* *
|
||||
* If defined, the SystemInit() function will not be called. By default *
|
||||
* SystemInit() is called after reset to enable the clocks and memories to *
|
||||
* be initialised prior to any C startup initialisation. *
|
||||
* *
|
||||
* NO_VTOR_CONFIG *
|
||||
* *
|
||||
* If defined, the vector table offset register will not be configured. *
|
||||
* *
|
||||
* MEMORY_INIT *
|
||||
* *
|
||||
* If defined, the MemoryInit() function will be called. By default *
|
||||
* MemoryInit() is called after SystemInit() to enable an external memory *
|
||||
* controller. *
|
||||
* *
|
||||
* STACK_INIT_VAL *
|
||||
* *
|
||||
* If defined, specifies the initial stack pointer value. If undefined, *
|
||||
* the stack pointer will be initialised to point to the end of the *
|
||||
* RAM segment. *
|
||||
* *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, the exception vectors will be copied from Flash to RAM. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
|
||||
.global Reset_Handler
|
||||
.extern _vectors
|
||||
|
||||
.section .init, "ax"
|
||||
.thumb_func
|
||||
|
||||
.equ VTOR_REG, 0xE000ED08
|
||||
|
||||
#ifndef STACK_INIT_VAL
|
||||
#define STACK_INIT_VAL __RAM_segment_end__
|
||||
#endif
|
||||
|
||||
Reset_Handler:
|
||||
#ifndef NO_STACK_INIT
|
||||
/* Initialise main stack */
|
||||
ldr r0, =STACK_INIT_VAL
|
||||
bic r0, #0x7
|
||||
mov sp, r0
|
||||
#endif
|
||||
#ifndef NO_SYSTEM_INIT
|
||||
/* Initialise system */
|
||||
ldr r0, =SystemInit
|
||||
blx r0
|
||||
#endif
|
||||
|
||||
#ifdef MEMORY_INIT
|
||||
ldr r0, =MemoryInit
|
||||
blx r0
|
||||
#endif
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
/* Copy exception vectors into RAM */
|
||||
ldr r0, =__vectors_start__
|
||||
ldr r1, =__vectors_end__
|
||||
ldr r2, =__vectors_ram_start__
|
||||
1:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
ldr r3, [r0]
|
||||
str r3, [r2]
|
||||
adds r0, r0, #4
|
||||
adds r2, r2, #4
|
||||
b 1b
|
||||
2:
|
||||
#endif
|
||||
|
||||
#ifndef NO_VTOR_CONFIG
|
||||
/* Configure vector table offset register */
|
||||
ldr r0, =VTOR_REG
|
||||
#ifdef VECTORS_IN_RAM
|
||||
ldr r1, =_vectors_ram
|
||||
#else
|
||||
ldr r1, =_vectors
|
||||
#endif
|
||||
str r1, [r0]
|
||||
#endif
|
||||
|
||||
/* Jump to program start */
|
||||
b _start
|
||||
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2015 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
function Reset() {
|
||||
TargetInterface.resetAndStop();
|
||||
}
|
||||
|
||||
function EnableTrace(traceInterfaceType) {
|
||||
// TODO: Enable trace
|
||||
}
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
<!DOCTYPE Board_Memory_Definition_File>
|
||||
<root name="LPC1769">
|
||||
<MemorySegment name="FLASH" start="0x00000000" size="0x00080000" access="ReadOnly" />
|
||||
<MemorySegment name="RAM" start="0x10000000" size="0x00008000" access="Read/Write" />
|
||||
<MemorySegment name="RAM2" start="0x2007C000" size="0x00008000" access="Read/Write" />
|
||||
</root>
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,418 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2015 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, an area of RAM will large enough to store the vector table *
|
||||
* will be reserved. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
.code 16
|
||||
|
||||
.section .init, "ax"
|
||||
.align 0
|
||||
|
||||
/*****************************************************************************
|
||||
* Default Exception Handlers *
|
||||
*****************************************************************************/
|
||||
|
||||
.thumb_func
|
||||
.weak NMI_Handler
|
||||
NMI_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak HardFault_Handler
|
||||
HardFault_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SVC_Handler
|
||||
SVC_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PendSV_Handler
|
||||
PendSV_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SysTick_Handler
|
||||
SysTick_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
Dummy_Handler:
|
||||
b .
|
||||
|
||||
#if defined(__OPTIMIZATION_SMALL)
|
||||
|
||||
.weak WDT_IRQHandler
|
||||
.thumb_set WDT_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER0_IRQHandler
|
||||
.thumb_set TIMER0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER1_IRQHandler
|
||||
.thumb_set TIMER1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER2_IRQHandler
|
||||
.thumb_set TIMER2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER3_IRQHandler
|
||||
.thumb_set TIMER3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART0_IRQHandler
|
||||
.thumb_set UART0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART1_IRQHandler
|
||||
.thumb_set UART1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART2_IRQHandler
|
||||
.thumb_set UART2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART3_IRQHandler
|
||||
.thumb_set UART3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PWM1_IRQHandler
|
||||
.thumb_set PWM1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C0_IRQHandler
|
||||
.thumb_set I2C0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C1_IRQHandler
|
||||
.thumb_set I2C1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C2_IRQHandler
|
||||
.thumb_set I2C2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SPI_IRQHandler
|
||||
.thumb_set SPI_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP0_IRQHandler
|
||||
.thumb_set SSP0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP1_IRQHandler
|
||||
.thumb_set SSP1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PLL0_IRQHandler
|
||||
.thumb_set PLL0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EINT0_IRQHandler
|
||||
.thumb_set EINT0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EINT1_IRQHandler
|
||||
.thumb_set EINT1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EINT2_IRQHandler
|
||||
.thumb_set EINT2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EINT3_IRQHandler
|
||||
.thumb_set EINT3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak BOD_IRQHandler
|
||||
.thumb_set BOD_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USB_IRQHandler
|
||||
.thumb_set USB_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CAN_IRQHandler
|
||||
.thumb_set CAN_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak DMA_IRQHandler
|
||||
.thumb_set DMA_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2S_IRQHandler
|
||||
.thumb_set I2S_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ENET_IRQHandler
|
||||
.thumb_set ENET_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak RIT_IRQHandler
|
||||
.thumb_set RIT_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak MCPWM_IRQHandler
|
||||
.thumb_set MCPWM_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak QEI_IRQHandler
|
||||
.thumb_set QEI_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PLL1_IRQHandler
|
||||
.thumb_set PLL1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USBActivity_IRQHandler
|
||||
.thumb_set USBActivity_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CANActivity_IRQHandler
|
||||
.thumb_set CANActivity_IRQHandler,Dummy_Handler
|
||||
|
||||
#else
|
||||
|
||||
.thumb_func
|
||||
.weak WDT_IRQHandler
|
||||
WDT_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER0_IRQHandler
|
||||
TIMER0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER1_IRQHandler
|
||||
TIMER1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER2_IRQHandler
|
||||
TIMER2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER3_IRQHandler
|
||||
TIMER3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART0_IRQHandler
|
||||
UART0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART1_IRQHandler
|
||||
UART1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART2_IRQHandler
|
||||
UART2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART3_IRQHandler
|
||||
UART3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PWM1_IRQHandler
|
||||
PWM1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C0_IRQHandler
|
||||
I2C0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C1_IRQHandler
|
||||
I2C1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C2_IRQHandler
|
||||
I2C2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SPI_IRQHandler
|
||||
SPI_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP0_IRQHandler
|
||||
SSP0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP1_IRQHandler
|
||||
SSP1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PLL0_IRQHandler
|
||||
PLL0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak RTC_IRQHandler
|
||||
RTC_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EINT0_IRQHandler
|
||||
EINT0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EINT1_IRQHandler
|
||||
EINT1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EINT2_IRQHandler
|
||||
EINT2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EINT3_IRQHandler
|
||||
EINT3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ADC_IRQHandler
|
||||
ADC_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak BOD_IRQHandler
|
||||
BOD_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USB_IRQHandler
|
||||
USB_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CAN_IRQHandler
|
||||
CAN_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak DMA_IRQHandler
|
||||
DMA_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2S_IRQHandler
|
||||
I2S_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ENET_IRQHandler
|
||||
ENET_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak RIT_IRQHandler
|
||||
RIT_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak MCPWM_IRQHandler
|
||||
MCPWM_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak QEI_IRQHandler
|
||||
QEI_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PLL1_IRQHandler
|
||||
PLL1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USBActivity_IRQHandler
|
||||
USBActivity_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CANActivity_IRQHandler
|
||||
CANActivity_IRQHandler:
|
||||
b .
|
||||
|
||||
#endif
|
||||
|
||||
/*****************************************************************************
|
||||
* Vector Table *
|
||||
*****************************************************************************/
|
||||
|
||||
.section .vectors, "ax"
|
||||
.align 0
|
||||
.global _vectors
|
||||
.extern __stack_end__
|
||||
.extern Reset_Handler
|
||||
|
||||
_vectors:
|
||||
.word __stack_end__
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word SVC_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WDT_IRQHandler
|
||||
.word TIMER0_IRQHandler
|
||||
.word TIMER1_IRQHandler
|
||||
.word TIMER2_IRQHandler
|
||||
.word TIMER3_IRQHandler
|
||||
.word UART0_IRQHandler
|
||||
.word UART1_IRQHandler
|
||||
.word UART2_IRQHandler
|
||||
.word UART3_IRQHandler
|
||||
.word PWM1_IRQHandler
|
||||
.word I2C0_IRQHandler
|
||||
.word I2C1_IRQHandler
|
||||
.word I2C2_IRQHandler
|
||||
.word SPI_IRQHandler
|
||||
.word SSP0_IRQHandler
|
||||
.word SSP1_IRQHandler
|
||||
.word PLL0_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word EINT0_IRQHandler
|
||||
.word EINT1_IRQHandler
|
||||
.word EINT2_IRQHandler
|
||||
.word EINT3_IRQHandler
|
||||
.word ADC_IRQHandler
|
||||
.word BOD_IRQHandler
|
||||
.word USB_IRQHandler
|
||||
.word CAN_IRQHandler
|
||||
.word DMA_IRQHandler
|
||||
.word I2S_IRQHandler
|
||||
.word ENET_IRQHandler
|
||||
.word RIT_IRQHandler
|
||||
.word MCPWM_IRQHandler
|
||||
.word QEI_IRQHandler
|
||||
.word PLL1_IRQHandler
|
||||
.word USBActivity_IRQHandler
|
||||
.word CANActivity_IRQHandler
|
||||
_vectors_end:
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
.section .vectors_ram, "ax"
|
||||
.align 0
|
||||
.global _vectors_ram
|
||||
|
||||
_vectors_ram:
|
||||
.space _vectors_end - _vectors, 0
|
||||
#endif
|
||||
@@ -0,0 +1,37 @@
|
||||
<!DOCTYPE Linker_Placement_File>
|
||||
<Root name="Flash Section Placement">
|
||||
<MemorySegment name="$(FLASH_NAME:FLASH)">
|
||||
<ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START:)" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init_rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".text" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".dtors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ctors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM_NAME:RAM);SRAM">
|
||||
<ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START:$(SRAM_START:))" />
|
||||
<ProgramSection alignment="4" load="No" name=".fast_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".data_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tbss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tdata_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".non_init" />
|
||||
<ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(FLASH2_NAME:FLASH2)">
|
||||
<ProgramSection alignment="4" load="Yes" name=".text2" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata2" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data2_run" name=".data2" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM2_NAME:RAM2)">
|
||||
<ProgramSection alignment="4" load="No" name=".data2_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss2" />
|
||||
</MemorySegment>
|
||||
</Root>
|
||||
@@ -0,0 +1,112 @@
|
||||
<!DOCTYPE CrossStudio_Project_File>
|
||||
<solution Name="lpc175x_6x" target="8" version="2">
|
||||
<project Name="lpc175x_6x">
|
||||
<configuration
|
||||
Name="Common"
|
||||
Placement="Flash"
|
||||
Target="LPC4357 Cortex-M4"
|
||||
arm_architecture="v7M"
|
||||
arm_core_type="Cortex-M3"
|
||||
arm_endian="Little"
|
||||
arm_fp_abi="Soft"
|
||||
arm_fpu_type="None"
|
||||
arm_interwork="No"
|
||||
arm_linker_heap_size="1024"
|
||||
arm_linker_process_stack_size="0"
|
||||
arm_linker_stack_size="1024"
|
||||
arm_simulator_memory_simulation_parameter="RX 00000000,00080000,FFFFFFFF;RWX 10000000,00008000,CDCDCDCD"
|
||||
arm_target_debug_interface_type="ADIv5"
|
||||
arm_target_device_name="LPC1769"
|
||||
arm_target_interface_type="SWD"
|
||||
build_treat_warnings_as_errors="Yes"
|
||||
c_preprocessor_definitions="LPC175x_6x;__LPC1700_FAMILY;__LPC176x_SUBFAMILY;ARM_MATH_CM3;FLASH_PLACEMENT=1;CORE_M3;BOARD_LPCXPRESSO1769;CFG_TUSB_MCU=OPT_MCU_LPC175X_6X"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)/inc"
|
||||
debug_register_definition_file="LPC176x5x_Registers.xml"
|
||||
debug_target_connection="J-Link"
|
||||
gcc_enable_all_warnings="Yes"
|
||||
gcc_entry_point="Reset_Handler"
|
||||
link_use_linker_script_file="No"
|
||||
linker_memory_map_file="LPC1769_MemoryMap.xml"
|
||||
linker_section_placement_file="flash_placement.xml"
|
||||
linker_section_placements_segments="FLASH RX 0x00000000 0x00080000;RAM RWX 0x10000000 0x00008000"
|
||||
macros="DeviceFamily=LPC1700;DeviceSubFamily=LPC176x;Target=LPC1769;Placement=Flash;rootDir=../../../../..;lpcDir=../../../../../hw/mcu/nxp/lpc_chip_175x_6x"
|
||||
project_directory=""
|
||||
project_type="Executable"
|
||||
target_reset_script="Reset();"
|
||||
target_script_file="$(ProjectDir)/LPC1700_Target.js"
|
||||
target_trace_initialize_script="EnableTrace("$(TraceInterfaceType)")" />
|
||||
<folder
|
||||
Name="tinyusb"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../src"
|
||||
recurse="Yes" />
|
||||
<folder Name="hw">
|
||||
<folder Name="bsp">
|
||||
<file file_name="../../../../../hw/bsp/ansi_escape.h" />
|
||||
<file file_name="../../../../../hw/bsp/board.h" />
|
||||
<folder Name="lpcxpresso1769">
|
||||
<file file_name="../../../../../hw/bsp/lpcxpresso1769/board_lpcxpresso1769.c" />
|
||||
<file file_name="../../../../../hw/bsp/lpcxpresso1769/board_lpcxpresso1769.h" />
|
||||
</folder>
|
||||
</folder>
|
||||
<folder Name="mcu">
|
||||
<folder Name="nxp">
|
||||
<folder Name="lpc_chip_175x_6x">
|
||||
<folder Name="inc">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/chip.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/chip_lpc175x_6x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/chip_lpc177x_8x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/chip_lpc407x_8x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/clock_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/cmsis.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/cmsis_175x_6x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/core_cm3.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/core_cmFunc.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/core_cmInstr.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/gpio_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/gpioint_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/iocon_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/lpc_types.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/sys_config.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/sysctl_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/inc/uart_17xx_40xx.h" />
|
||||
</folder>
|
||||
<folder Name="src">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/src/chip_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/src/clock_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/src/gpio_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/src/iocon_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/src/sysctl_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/src/sysinit_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_175x_6x/src/uart_17xx_40xx.c" />
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
<configuration Name="Debug" build_treat_warnings_as_errors="Yes" />
|
||||
<folder
|
||||
Name="src"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../src"
|
||||
recurse="Yes" />
|
||||
<folder Name="System Files">
|
||||
<file file_name="flash_placement.xml" />
|
||||
<file file_name="LPC1700_Startup.s" />
|
||||
<file file_name="LPC1700_Target.js" />
|
||||
<file file_name="LPC1769_MemoryMap.xml" />
|
||||
<file file_name="LPC176x5x_Registers.xml" />
|
||||
<file file_name="LPC176x5x_Vectors.s" />
|
||||
<file file_name="thumb_crt0.s" />
|
||||
</folder>
|
||||
<folder
|
||||
Name="segger_rtt"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../lib/segger_rtt"
|
||||
recurse="No" />
|
||||
</project>
|
||||
<configuration Name="LPCXpresso 1769" />
|
||||
</solution>
|
||||
@@ -0,0 +1,415 @@
|
||||
// **********************************************************************
|
||||
// * SEGGER Microcontroller GmbH *
|
||||
// * The Embedded Experts *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * (c) 2014 - 2018 SEGGER Microcontroller GmbH *
|
||||
// * (c) 2001 - 2018 Rowley Associates Limited *
|
||||
// * *
|
||||
// * www.segger.com Support: support@segger.com *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * All rights reserved. *
|
||||
// * *
|
||||
// * Redistribution and use in source and binary forms, with or *
|
||||
// * without modification, are permitted provided that the following *
|
||||
// * conditions are met: *
|
||||
// * *
|
||||
// * - Redistributions of source code must retain the above copyright *
|
||||
// * notice, this list of conditions and the following disclaimer. *
|
||||
// * *
|
||||
// * - Neither the name of SEGGER Microcontroller GmbH *
|
||||
// * nor the names of its contributors may be used to endorse or *
|
||||
// * promote products derived from this software without specific *
|
||||
// * prior written permission. *
|
||||
// * *
|
||||
// * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
|
||||
// * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
|
||||
// * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
|
||||
// * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
|
||||
// * DISCLAIMED. *
|
||||
// * IN NO EVENT SHALL SEGGER Microcontroller GmbH BE LIABLE FOR *
|
||||
// * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
|
||||
// * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
|
||||
// * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
|
||||
// * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
|
||||
// * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
|
||||
// * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
|
||||
// * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
|
||||
// * DAMAGE. *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
//
|
||||
//
|
||||
// Preprocessor Definitions
|
||||
// ------------------------
|
||||
// APP_ENTRY_POINT
|
||||
//
|
||||
// Defines the application entry point function, if undefined this setting
|
||||
// defaults to "main".
|
||||
//
|
||||
// INITIALIZE_STACK
|
||||
//
|
||||
// If defined, the contents of the stack will be initialized to a the
|
||||
// value 0xCC.
|
||||
//
|
||||
// INITIALIZE_SECONDARY_SECTIONS
|
||||
//
|
||||
// If defined, the .data2, .text2, .rodata2 and .bss2 sections will be initialized.
|
||||
//
|
||||
// INITIALIZE_TCM_SECTIONS
|
||||
//
|
||||
// If defined, the .data_tcm, .text_tcm, .rodata_tcm and .bss_tcm sections
|
||||
// will be initialized.
|
||||
//
|
||||
// INITIALIZE_USER_SECTIONS
|
||||
//
|
||||
// If defined, the function InitializeUserMemorySections will be called prior
|
||||
// to entering main in order to allow the user to initialize any user defined
|
||||
// memory sections.
|
||||
//
|
||||
// FULL_LIBRARY
|
||||
//
|
||||
// If defined then
|
||||
// - argc, argv are setup by the debug_getargs.
|
||||
// - the exit symbol is defined and executes on return from main.
|
||||
// - the exit symbol calls destructors, atexit functions and then debug_exit.
|
||||
//
|
||||
// If not defined then
|
||||
// - argc and argv are zero.
|
||||
// - the exit symbol is defined, executes on return from main and loops
|
||||
//
|
||||
|
||||
#ifndef APP_ENTRY_POINT
|
||||
#define APP_ENTRY_POINT main
|
||||
#endif
|
||||
|
||||
#ifndef ARGSSPACE
|
||||
#define ARGSSPACE 128
|
||||
#endif
|
||||
.syntax unified
|
||||
|
||||
.global _start
|
||||
.extern APP_ENTRY_POINT
|
||||
.global exit
|
||||
.weak exit
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
.extern InitializeUserMemorySections
|
||||
#endif
|
||||
|
||||
.section .init, "ax"
|
||||
.code 16
|
||||
.balign 2
|
||||
.thumb_func
|
||||
|
||||
_start:
|
||||
/* Set up main stack if size > 0 */
|
||||
ldr r1, =__stack_end__
|
||||
ldr r0, =__stack_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
mov sp, r1
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
ldr r0, =__stack_start__
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Set up process stack if size > 0 */
|
||||
ldr r1, =__stack_process_end__
|
||||
ldr r0, =__stack_process_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
msr psp, r1
|
||||
movs r2, #2
|
||||
msr control, r2
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Copy initialized memory sections into RAM (if necessary). */
|
||||
ldr r0, =__data_load_start__
|
||||
ldr r1, =__data_start__
|
||||
ldr r2, =__data_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_load_start__
|
||||
ldr r1, =__text_start__
|
||||
ldr r2, =__text_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__fast_load_start__
|
||||
ldr r1, =__fast_start__
|
||||
ldr r2, =__fast_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__ctors_load_start__
|
||||
ldr r1, =__ctors_start__
|
||||
ldr r2, =__ctors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__dtors_load_start__
|
||||
ldr r1, =__dtors_start__
|
||||
ldr r2, =__dtors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_load_start__
|
||||
ldr r1, =__rodata_start__
|
||||
ldr r2, =__rodata_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__tdata_load_start__
|
||||
ldr r1, =__tdata_start__
|
||||
ldr r2, =__tdata_end__
|
||||
bl memory_copy
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__data2_load_start__
|
||||
ldr r1, =__data2_start__
|
||||
ldr r2, =__data2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text2_load_start__
|
||||
ldr r1, =__text2_start__
|
||||
ldr r2, =__text2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata2_load_start__
|
||||
ldr r1, =__rodata2_start__
|
||||
ldr r2, =__rodata2_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__data_tcm_load_start__
|
||||
ldr r1, =__data_tcm_start__
|
||||
ldr r2, =__data_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_tcm_load_start__
|
||||
ldr r1, =__text_tcm_start__
|
||||
ldr r2, =__text_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_tcm_load_start__
|
||||
ldr r1, =__rodata_tcm_start__
|
||||
ldr r2, =__rodata_tcm_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Zero the bss. */
|
||||
ldr r0, =__bss_start__
|
||||
ldr r1, =__bss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
ldr r0, =__tbss_start__
|
||||
ldr r1, =__tbss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__bss2_start__
|
||||
ldr r1, =__bss2_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__bss_tcm_start__
|
||||
ldr r1, =__bss_tcm_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Initialize the heap */
|
||||
ldr r0, = __heap_start__
|
||||
ldr r1, = __heap_end__
|
||||
subs r1, r1, r0
|
||||
cmp r1, #8
|
||||
blt 1f
|
||||
movs r2, #0
|
||||
str r2, [r0]
|
||||
adds r0, r0, #4
|
||||
str r1, [r0]
|
||||
1:
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
ldr r2, =InitializeUserMemorySections
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Call constructors */
|
||||
ldr r0, =__ctors_start__
|
||||
ldr r1, =__ctors_end__
|
||||
ctor_loop:
|
||||
cmp r0, r1
|
||||
beq ctor_end
|
||||
ldr r2, [r0]
|
||||
adds r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b ctor_loop
|
||||
ctor_end:
|
||||
|
||||
/* Setup initial call frame */
|
||||
movs r0, #0
|
||||
mov lr, r0
|
||||
mov r12, sp
|
||||
|
||||
.type start, function
|
||||
start:
|
||||
/* Jump to application entry point */
|
||||
#ifdef FULL_LIBRARY
|
||||
movs r0, #ARGSSPACE
|
||||
ldr r1, =args
|
||||
ldr r2, =debug_getargs
|
||||
blx r2
|
||||
ldr r1, =args
|
||||
#else
|
||||
movs r0, #0
|
||||
movs r1, #0
|
||||
#endif
|
||||
ldr r2, =APP_ENTRY_POINT
|
||||
blx r2
|
||||
|
||||
.thumb_func
|
||||
exit:
|
||||
#ifdef FULL_LIBRARY
|
||||
mov r5, r0 // save the exit parameter/return result
|
||||
|
||||
/* Call destructors */
|
||||
ldr r0, =__dtors_start__
|
||||
ldr r1, =__dtors_end__
|
||||
dtor_loop:
|
||||
cmp r0, r1
|
||||
beq dtor_end
|
||||
ldr r2, [r0]
|
||||
add r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b dtor_loop
|
||||
dtor_end:
|
||||
|
||||
/* Call atexit functions */
|
||||
ldr r2, =_execute_at_exit_fns
|
||||
blx r2
|
||||
|
||||
/* Call debug_exit with return result/exit parameter */
|
||||
mov r0, r5
|
||||
ldr r2, =debug_exit
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Returned from application entry point, loop forever. */
|
||||
exit_loop:
|
||||
b exit_loop
|
||||
|
||||
.thumb_func
|
||||
memory_copy:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
subs r2, r2, r1
|
||||
beq 2f
|
||||
1:
|
||||
ldrb r3, [r0]
|
||||
adds r0, r0, #1
|
||||
strb r3, [r1]
|
||||
adds r1, r1, #1
|
||||
subs r2, r2, #1
|
||||
bne 1b
|
||||
2:
|
||||
bx lr
|
||||
|
||||
.thumb_func
|
||||
memory_set:
|
||||
cmp r0, r1
|
||||
beq 1f
|
||||
strb r2, [r0]
|
||||
adds r0, r0, #1
|
||||
b memory_set
|
||||
1:
|
||||
bx lr
|
||||
|
||||
// default C/C++ library helpers
|
||||
|
||||
.macro HELPER helper_name
|
||||
.section .text.\helper_name, "ax", %progbits
|
||||
.balign 2
|
||||
.global \helper_name
|
||||
.weak \helper_name
|
||||
\helper_name:
|
||||
.thumb_func
|
||||
.endm
|
||||
|
||||
.macro JUMPTO name
|
||||
#if defined(__thumb__) && !defined(__thumb2__)
|
||||
mov r12, r0
|
||||
ldr r0, =\name
|
||||
push {r0}
|
||||
mov r0, r12
|
||||
pop {pc}
|
||||
#else
|
||||
b \name
|
||||
#endif
|
||||
.endm
|
||||
|
||||
HELPER __aeabi_read_tp
|
||||
ldr r0, =__tbss_start__-8
|
||||
bx lr
|
||||
HELPER abort
|
||||
b .
|
||||
HELPER __assert
|
||||
b .
|
||||
HELPER __aeabi_assert
|
||||
b .
|
||||
HELPER __sync_synchronize
|
||||
bx lr
|
||||
HELPER __getchar
|
||||
JUMPTO debug_getchar
|
||||
HELPER __putchar
|
||||
JUMPTO debug_putchar
|
||||
HELPER __open
|
||||
JUMPTO debug_fopen
|
||||
HELPER __close
|
||||
JUMPTO debug_fclose
|
||||
HELPER __write
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fwrite
|
||||
HELPER __read
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fread
|
||||
HELPER __seek
|
||||
push {r4, lr}
|
||||
mov r4, r0
|
||||
bl debug_fseek
|
||||
cmp r0, #0
|
||||
bne 1f
|
||||
mov r0, r4
|
||||
bl debug_ftell
|
||||
pop {r4, pc}
|
||||
1:
|
||||
ldr r0, =-1
|
||||
pop {r4, pc}
|
||||
// char __user_locale_name_buffer[];
|
||||
.section .bss.__user_locale_name_buffer, "aw", %nobits
|
||||
.global __user_locale_name_buffer
|
||||
.weak __user_locale_name_buffer
|
||||
__user_locale_name_buffer:
|
||||
.word 0x0
|
||||
|
||||
#ifdef FULL_LIBRARY
|
||||
.bss
|
||||
args:
|
||||
.space ARGSSPACE
|
||||
#endif
|
||||
|
||||
/* Setup attibutes of stack and heap sections so they don't take up room in the elf file */
|
||||
.section .stack, "wa", %nobits
|
||||
.section .stack_process, "wa", %nobits
|
||||
.section .heap, "wa", %nobits
|
||||
|
||||
@@ -0,0 +1,110 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2017 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* NO_STACK_INIT *
|
||||
* *
|
||||
* If defined, the stack pointer will not be initialised. *
|
||||
* *
|
||||
* NO_SYSTEM_INIT *
|
||||
* *
|
||||
* If defined, the SystemInit() function will not be called. By default *
|
||||
* SystemInit() is called after reset to enable the clocks and memories to *
|
||||
* be initialised prior to any C startup initialisation. *
|
||||
* *
|
||||
* NO_VTOR_CONFIG *
|
||||
* *
|
||||
* If defined, the vector table offset register will not be configured. *
|
||||
* *
|
||||
* MEMORY_INIT *
|
||||
* *
|
||||
* If defined, the MemoryInit() function will be called. By default *
|
||||
* MemoryInit() is called after SystemInit() to enable an external memory *
|
||||
* controller. *
|
||||
* *
|
||||
* STACK_INIT_VAL *
|
||||
* *
|
||||
* If defined, specifies the initial stack pointer value. If undefined, *
|
||||
* the stack pointer will be initialised to point to the end of the *
|
||||
* RAM segment. *
|
||||
* *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, the exception vectors will be copied from Flash to RAM. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
|
||||
.global Reset_Handler
|
||||
.extern _vectors
|
||||
|
||||
.section .init, "ax"
|
||||
.thumb_func
|
||||
|
||||
.equ VTOR_REG, 0xE000ED08
|
||||
|
||||
#ifndef STACK_INIT_VAL
|
||||
#define STACK_INIT_VAL __RAM_segment_end__
|
||||
#endif
|
||||
|
||||
Reset_Handler:
|
||||
#ifndef NO_STACK_INIT
|
||||
/* Initialise main stack */
|
||||
ldr r0, =STACK_INIT_VAL
|
||||
bic r0, #0x7
|
||||
mov sp, r0
|
||||
#endif
|
||||
|
||||
#ifndef NO_SYSTEM_INIT
|
||||
/* Initialise system */
|
||||
ldr r0, =SystemInit
|
||||
blx r0
|
||||
#endif
|
||||
|
||||
#ifdef MEMORY_INIT
|
||||
ldr r0, =MemoryInit
|
||||
blx r0
|
||||
#endif
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
/* Copy exception vectors into RAM */
|
||||
ldr r0, =__vectors_start__
|
||||
ldr r1, =__vectors_end__
|
||||
ldr r2, =__vectors_ram_start__
|
||||
1:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
ldr r3, [r0]
|
||||
str r3, [r2]
|
||||
adds r0, r0, #4
|
||||
adds r2, r2, #4
|
||||
b 1b
|
||||
2:
|
||||
#endif
|
||||
|
||||
#ifndef NO_VTOR_CONFIG
|
||||
/* Configure vector table offset register */
|
||||
ldr r0, =VTOR_REG
|
||||
#ifdef VECTORS_IN_RAM
|
||||
ldr r1, =_vectors_ram
|
||||
#else
|
||||
ldr r1, =_vectors
|
||||
#endif
|
||||
str r1, [r0]
|
||||
#endif
|
||||
|
||||
/* Jump to program start */
|
||||
b _start
|
||||
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2017 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
function Reset() {
|
||||
TargetInterface.resetAndStop();
|
||||
}
|
||||
|
||||
function EnableTrace(traceInterfaceType) {
|
||||
// TODO: Enable trace
|
||||
}
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
<!DOCTYPE Board_Memory_Definition_File>
|
||||
<root name="LPC1857">
|
||||
<MemorySegment name="RAM" start="0x10000000" size="0x00008000" access="Read/Write" />
|
||||
<MemorySegment name="FLASH" start="0x1A000000" size="0x00080000" access="ReadOnly" />
|
||||
<MemorySegment name="FLASH2" start="0x1B000000" size="0x00080000" access="ReadOnly" />
|
||||
<MemorySegment name="RAM2" start="0x20000000" size="0x00010000" access="Read/Write" />
|
||||
</root>
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,516 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2017 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, an area of RAM will large enough to store the vector table *
|
||||
* will be reserved. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
.code 16
|
||||
|
||||
.section .init, "ax"
|
||||
.align 0
|
||||
|
||||
/*****************************************************************************
|
||||
* Default Exception Handlers *
|
||||
*****************************************************************************/
|
||||
|
||||
.thumb_func
|
||||
.weak NMI_Handler
|
||||
NMI_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak HardFault_Handler
|
||||
HardFault_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SVC_Handler
|
||||
SVC_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PendSV_Handler
|
||||
PendSV_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SysTick_Handler
|
||||
SysTick_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
Dummy_Handler:
|
||||
b .
|
||||
|
||||
#if defined(__OPTIMIZATION_SMALL)
|
||||
|
||||
.weak DAC_IRQHandler
|
||||
.thumb_set DAC_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak DMA_IRQHandler
|
||||
.thumb_set DMA_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ETHERNET_IRQHandler
|
||||
.thumb_set ETHERNET_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak LCD_IRQHandler
|
||||
.thumb_set LCD_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USB0_IRQHandler
|
||||
.thumb_set USB0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USB1_IRQHandler
|
||||
.thumb_set USB1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SCT_IRQHandler
|
||||
.thumb_set SCT_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak RITIMER_IRQHandler
|
||||
.thumb_set RITIMER_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER0_IRQHandler
|
||||
.thumb_set TIMER0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER1_IRQHandler
|
||||
.thumb_set TIMER1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER2_IRQHandler
|
||||
.thumb_set TIMER2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER3_IRQHandler
|
||||
.thumb_set TIMER3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak MCPWM_IRQHandler
|
||||
.thumb_set MCPWM_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ADC0_IRQHandler
|
||||
.thumb_set ADC0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C0_IRQHandler
|
||||
.thumb_set I2C0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C1_IRQHandler
|
||||
.thumb_set I2C1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP0_IRQHandler
|
||||
.thumb_set SSP0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP1_IRQHandler
|
||||
.thumb_set SSP1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USART0_IRQHandler
|
||||
.thumb_set USART0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART1_IRQHandler
|
||||
.thumb_set UART1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2S0_IRQHandler
|
||||
.thumb_set I2S0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2S1_IRQHandler
|
||||
.thumb_set I2S1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SPIFI_IRQHandler
|
||||
.thumb_set SPIFI_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT0_IRQHandler
|
||||
.thumb_set PIN_INT0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT1_IRQHandler
|
||||
.thumb_set PIN_INT1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT2_IRQHandler
|
||||
.thumb_set PIN_INT2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT3_IRQHandler
|
||||
.thumb_set PIN_INT3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT4_IRQHandler
|
||||
.thumb_set PIN_INT4_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT5_IRQHandler
|
||||
.thumb_set PIN_INT5_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT6_IRQHandler
|
||||
.thumb_set PIN_INT6_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PIN_INT7_IRQHandler
|
||||
.thumb_set PIN_INT7_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak GINT0_IRQHandler
|
||||
.thumb_set GINT0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak GINT1_IRQHandler
|
||||
.thumb_set GINT1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EVENTROUTER_IRQHandler
|
||||
.thumb_set EVENTROUTER_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak C_CAN1_IRQHandler
|
||||
.thumb_set C_CAN1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ATIMER_IRQHandler
|
||||
.thumb_set ATIMER_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak WWDT_IRQHandler
|
||||
.thumb_set WWDT_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak C_CAN0_IRQHandler
|
||||
.thumb_set C_CAN0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak QEI_IRQHandler
|
||||
.thumb_set QEI_IRQHandler,Dummy_Handler
|
||||
|
||||
#else
|
||||
|
||||
.thumb_func
|
||||
.weak DAC_IRQHandler
|
||||
DAC_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak DMA_IRQHandler
|
||||
DMA_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak FLASH_IRQHandler
|
||||
FLASH_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ETHERNET_IRQHandler
|
||||
ETHERNET_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SDIO_IRQHandler
|
||||
SDIO_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak LCD_IRQHandler
|
||||
LCD_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USB0_IRQHandler
|
||||
USB0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USB1_IRQHandler
|
||||
USB1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SCT_IRQHandler
|
||||
SCT_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak RITIMER_IRQHandler
|
||||
RITIMER_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER0_IRQHandler
|
||||
TIMER0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER1_IRQHandler
|
||||
TIMER1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER2_IRQHandler
|
||||
TIMER2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER3_IRQHandler
|
||||
TIMER3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak MCPWM_IRQHandler
|
||||
MCPWM_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ADC0_IRQHandler
|
||||
ADC0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C0_IRQHandler
|
||||
I2C0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C1_IRQHandler
|
||||
I2C1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ADC1_IRQHandler
|
||||
ADC1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP0_IRQHandler
|
||||
SSP0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP1_IRQHandler
|
||||
SSP1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USART0_IRQHandler
|
||||
USART0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART1_IRQHandler
|
||||
UART1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USART2_IRQHandler
|
||||
USART2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USART3_IRQHandler
|
||||
USART3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2S0_IRQHandler
|
||||
I2S0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2S1_IRQHandler
|
||||
I2S1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SPIFI_IRQHandler
|
||||
SPIFI_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT0_IRQHandler
|
||||
PIN_INT0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT1_IRQHandler
|
||||
PIN_INT1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT2_IRQHandler
|
||||
PIN_INT2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT3_IRQHandler
|
||||
PIN_INT3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT4_IRQHandler
|
||||
PIN_INT4_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT5_IRQHandler
|
||||
PIN_INT5_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT6_IRQHandler
|
||||
PIN_INT6_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PIN_INT7_IRQHandler
|
||||
PIN_INT7_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak GINT0_IRQHandler
|
||||
GINT0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak GINT1_IRQHandler
|
||||
GINT1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EVENTROUTER_IRQHandler
|
||||
EVENTROUTER_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak C_CAN1_IRQHandler
|
||||
C_CAN1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ATIMER_IRQHandler
|
||||
ATIMER_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak RTC_IRQHandler
|
||||
RTC_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak WWDT_IRQHandler
|
||||
WWDT_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak C_CAN0_IRQHandler
|
||||
C_CAN0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak QEI_IRQHandler
|
||||
QEI_IRQHandler:
|
||||
b .
|
||||
|
||||
#endif
|
||||
|
||||
/*****************************************************************************
|
||||
* Vector Table *
|
||||
*****************************************************************************/
|
||||
|
||||
.section .vectors, "ax"
|
||||
.align 0
|
||||
.global _vectors
|
||||
.extern __stack_end__
|
||||
.extern Reset_Handler
|
||||
|
||||
_vectors:
|
||||
.word __stack_end__
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word SVC_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word DAC_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word DMA_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word FLASH_IRQHandler
|
||||
.word ETHERNET_IRQHandler
|
||||
.word SDIO_IRQHandler
|
||||
.word LCD_IRQHandler
|
||||
.word USB0_IRQHandler
|
||||
.word USB1_IRQHandler
|
||||
.word SCT_IRQHandler
|
||||
.word RITIMER_IRQHandler
|
||||
.word TIMER0_IRQHandler
|
||||
.word TIMER1_IRQHandler
|
||||
.word TIMER2_IRQHandler
|
||||
.word TIMER3_IRQHandler
|
||||
.word MCPWM_IRQHandler
|
||||
.word ADC0_IRQHandler
|
||||
.word I2C0_IRQHandler
|
||||
.word I2C1_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word ADC1_IRQHandler
|
||||
.word SSP0_IRQHandler
|
||||
.word SSP1_IRQHandler
|
||||
.word USART0_IRQHandler
|
||||
.word UART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word I2S0_IRQHandler
|
||||
.word I2S1_IRQHandler
|
||||
.word SPIFI_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word PIN_INT0_IRQHandler
|
||||
.word PIN_INT1_IRQHandler
|
||||
.word PIN_INT2_IRQHandler
|
||||
.word PIN_INT3_IRQHandler
|
||||
.word PIN_INT4_IRQHandler
|
||||
.word PIN_INT5_IRQHandler
|
||||
.word PIN_INT6_IRQHandler
|
||||
.word PIN_INT7_IRQHandler
|
||||
.word GINT0_IRQHandler
|
||||
.word GINT1_IRQHandler
|
||||
.word EVENTROUTER_IRQHandler
|
||||
.word C_CAN1_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word ATIMER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word WWDT_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word C_CAN0_IRQHandler
|
||||
.word QEI_IRQHandler
|
||||
_vectors_end:
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
.section .vectors_ram, "ax"
|
||||
.align 0
|
||||
.global _vectors_ram
|
||||
|
||||
_vectors_ram:
|
||||
.space _vectors_end - _vectors, 0
|
||||
#endif
|
||||
@@ -0,0 +1,37 @@
|
||||
<!DOCTYPE Linker_Placement_File>
|
||||
<Root name="Flash Section Placement">
|
||||
<MemorySegment name="$(FLASH_NAME:FLASH)">
|
||||
<ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START:)" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init_rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".text" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".dtors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ctors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM_NAME:RAM);SRAM">
|
||||
<ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START:$(SRAM_START:))" />
|
||||
<ProgramSection alignment="4" load="No" name=".fast_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".data_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tbss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tdata_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".non_init" />
|
||||
<ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(FLASH2_NAME:FLASH2)">
|
||||
<ProgramSection alignment="4" load="Yes" name=".text2" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata2" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data2_run" name=".data2" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM2_NAME:RAM2)">
|
||||
<ProgramSection alignment="4" load="No" name=".data2_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss2" />
|
||||
</MemorySegment>
|
||||
</Root>
|
||||
@@ -0,0 +1,131 @@
|
||||
<!DOCTYPE CrossStudio_Project_File>
|
||||
<solution Name="lpc18xx" target="8" version="2">
|
||||
<project Name="lpc18xx">
|
||||
<configuration
|
||||
Name="Common"
|
||||
Placement="Flash"
|
||||
Target="LPC1857"
|
||||
arm_architecture="v7M"
|
||||
arm_core_type="Cortex-M3"
|
||||
arm_endian="Little"
|
||||
arm_fpu_type="None"
|
||||
arm_interwork="No"
|
||||
arm_linker_heap_size="256"
|
||||
arm_linker_process_stack_size="0"
|
||||
arm_linker_stack_size="256"
|
||||
arm_simulator_memory_simulation_parameter="RAM;0x10000000;0x00008000;ROM;0x1A000000;0x00080000;ROM;0x1B000000;0x00080000;RAM;0x20000000;0x00010000"
|
||||
arm_target_debug_interface_type="ADIv5"
|
||||
arm_target_device_name="LPC1857"
|
||||
arm_target_interface_type="SWD"
|
||||
build_treat_warnings_as_errors="Yes"
|
||||
c_preprocessor_definitions="LPC18xx;__LPC1800_FAMILY;__LPC185x_SUBFAMILY;ARM_MATH_CM3;FLASH_PLACEMENT=1;CORE_M3;BOARD_MCB1800;CFG_TUSB_MCU=OPT_MCU_LPC18XX;CFG_TUSB_MEM_SECTION= __attribute__((section(".bss2")))"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)//inc;$(lpcDir)//inc/config_18xx"
|
||||
debug_register_definition_file="$(ProjectDir)/LPC18xx_Registers.xml"
|
||||
debug_target_connection="J-Link"
|
||||
gcc_enable_all_warnings="Yes"
|
||||
gcc_entry_point="Reset_Handler"
|
||||
linker_memory_map_file="$(ProjectDir)/LPC1857_MemoryMap.xml"
|
||||
linker_section_placement_file="$(ProjectDir)/flash_placement.xml"
|
||||
macros="DeviceFamily=LPC1800;DeviceSubFamily=LPC185x;Target=LPC1857;Placement=Flash;rootDir=../../../../..;lpcDir=../../../../../hw/mcu/nxp/lpc_chip_18xx"
|
||||
package_dependencies="LPC1800"
|
||||
project_directory=""
|
||||
project_type="Executable"
|
||||
target_reset_script="Reset();"
|
||||
target_trace_initialize_script="EnableTrace("$(TraceInterfaceType)")" />
|
||||
<folder Name="System Files">
|
||||
<file file_name="thumb_crt0.s" />
|
||||
<file file_name="LPC1800_Startup.s" />
|
||||
<file file_name="LPC18xx_Vectors.s">
|
||||
<configuration Name="Common" file_type="Assembly" />
|
||||
</file>
|
||||
<file file_name="LPC1857_MemoryMap.xml" />
|
||||
<file file_name="flash_placement.xml" />
|
||||
<file file_name="LPC1800_Target.js">
|
||||
<configuration Name="Common" file_type="Reset Script" />
|
||||
</file>
|
||||
</folder>
|
||||
<configuration
|
||||
Name="Debug"
|
||||
link_use_linker_script_file="No"
|
||||
linker_section_placement_file="flash_placement.xml" />
|
||||
<folder Name="hw">
|
||||
<folder Name="bsp">
|
||||
<file file_name="../../../../../hw/bsp/ansi_escape.h" />
|
||||
<file file_name="../../../../../hw/bsp/board.h" />
|
||||
<folder Name="mcb1800">
|
||||
<file file_name="../../../../../hw/bsp/mcb1800/board_mcb1800.c" />
|
||||
<file file_name="../../../../../hw/bsp/mcb1800/board_mcb1800.h" />
|
||||
</folder>
|
||||
</folder>
|
||||
<folder Name="mcu">
|
||||
<folder Name="nxp">
|
||||
<folder Name="lpc_chip_18xx">
|
||||
<folder Name="inc">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/arm_common_tables.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/arm_math.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/cguccu_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/chip.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/chip_clocks.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/chip_lpc18xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/chip_lpc43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/clock_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/cmsis.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/cmsis_18xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/cmsis_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/cmsis_43xx_m0app.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/cmsis_43xx_m0sub.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/core_cm0.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/core_cm0plus.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/core_cm3.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/core_cm4.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/core_cm4_simd.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/core_cmFunc.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/core_cmInstr.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/core_sc000.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/core_sc300.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/creg_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/gpio_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/lpc_types.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/uart_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/usbhs_18xx_43xx.h" />
|
||||
<folder Name="config_18xx">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/config_18xx/cmsis_18xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/inc/config_18xx/sys_config.h" />
|
||||
</folder>
|
||||
</folder>
|
||||
<folder Name="src">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/src/chip_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/src/clock_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/src/gpio_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/src/sysinit_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_18xx/src/uart_18xx_43xx.c" />
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
<folder
|
||||
Name="segger_rtt"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../lib/segger_rtt"
|
||||
recurse="No" />
|
||||
<folder
|
||||
Name="src"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../src"
|
||||
recurse="Yes" />
|
||||
<folder
|
||||
Name="tinyusb"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../src"
|
||||
recurse="Yes" />
|
||||
</project>
|
||||
<configuration
|
||||
Name="MCB1800"
|
||||
c_preprocessor_definitions="DEBUG"
|
||||
gcc_debugging_level="Level 3"
|
||||
gcc_optimization_level="None" />
|
||||
</solution>
|
||||
@@ -0,0 +1,415 @@
|
||||
// **********************************************************************
|
||||
// * SEGGER Microcontroller GmbH *
|
||||
// * The Embedded Experts *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * (c) 2014 - 2018 SEGGER Microcontroller GmbH *
|
||||
// * (c) 2001 - 2018 Rowley Associates Limited *
|
||||
// * *
|
||||
// * www.segger.com Support: support@segger.com *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * All rights reserved. *
|
||||
// * *
|
||||
// * Redistribution and use in source and binary forms, with or *
|
||||
// * without modification, are permitted provided that the following *
|
||||
// * conditions are met: *
|
||||
// * *
|
||||
// * - Redistributions of source code must retain the above copyright *
|
||||
// * notice, this list of conditions and the following disclaimer. *
|
||||
// * *
|
||||
// * - Neither the name of SEGGER Microcontroller GmbH *
|
||||
// * nor the names of its contributors may be used to endorse or *
|
||||
// * promote products derived from this software without specific *
|
||||
// * prior written permission. *
|
||||
// * *
|
||||
// * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
|
||||
// * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
|
||||
// * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
|
||||
// * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
|
||||
// * DISCLAIMED. *
|
||||
// * IN NO EVENT SHALL SEGGER Microcontroller GmbH BE LIABLE FOR *
|
||||
// * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
|
||||
// * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
|
||||
// * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
|
||||
// * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
|
||||
// * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
|
||||
// * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
|
||||
// * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
|
||||
// * DAMAGE. *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
//
|
||||
//
|
||||
// Preprocessor Definitions
|
||||
// ------------------------
|
||||
// APP_ENTRY_POINT
|
||||
//
|
||||
// Defines the application entry point function, if undefined this setting
|
||||
// defaults to "main".
|
||||
//
|
||||
// INITIALIZE_STACK
|
||||
//
|
||||
// If defined, the contents of the stack will be initialized to a the
|
||||
// value 0xCC.
|
||||
//
|
||||
// INITIALIZE_SECONDARY_SECTIONS
|
||||
//
|
||||
// If defined, the .data2, .text2, .rodata2 and .bss2 sections will be initialized.
|
||||
//
|
||||
// INITIALIZE_TCM_SECTIONS
|
||||
//
|
||||
// If defined, the .data_tcm, .text_tcm, .rodata_tcm and .bss_tcm sections
|
||||
// will be initialized.
|
||||
//
|
||||
// INITIALIZE_USER_SECTIONS
|
||||
//
|
||||
// If defined, the function InitializeUserMemorySections will be called prior
|
||||
// to entering main in order to allow the user to initialize any user defined
|
||||
// memory sections.
|
||||
//
|
||||
// FULL_LIBRARY
|
||||
//
|
||||
// If defined then
|
||||
// - argc, argv are setup by the debug_getargs.
|
||||
// - the exit symbol is defined and executes on return from main.
|
||||
// - the exit symbol calls destructors, atexit functions and then debug_exit.
|
||||
//
|
||||
// If not defined then
|
||||
// - argc and argv are zero.
|
||||
// - the exit symbol is defined, executes on return from main and loops
|
||||
//
|
||||
|
||||
#ifndef APP_ENTRY_POINT
|
||||
#define APP_ENTRY_POINT main
|
||||
#endif
|
||||
|
||||
#ifndef ARGSSPACE
|
||||
#define ARGSSPACE 128
|
||||
#endif
|
||||
.syntax unified
|
||||
|
||||
.global _start
|
||||
.extern APP_ENTRY_POINT
|
||||
.global exit
|
||||
.weak exit
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
.extern InitializeUserMemorySections
|
||||
#endif
|
||||
|
||||
.section .init, "ax"
|
||||
.code 16
|
||||
.balign 2
|
||||
.thumb_func
|
||||
|
||||
_start:
|
||||
/* Set up main stack if size > 0 */
|
||||
ldr r1, =__stack_end__
|
||||
ldr r0, =__stack_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
mov sp, r1
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
ldr r0, =__stack_start__
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Set up process stack if size > 0 */
|
||||
ldr r1, =__stack_process_end__
|
||||
ldr r0, =__stack_process_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
msr psp, r1
|
||||
movs r2, #2
|
||||
msr control, r2
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Copy initialized memory sections into RAM (if necessary). */
|
||||
ldr r0, =__data_load_start__
|
||||
ldr r1, =__data_start__
|
||||
ldr r2, =__data_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_load_start__
|
||||
ldr r1, =__text_start__
|
||||
ldr r2, =__text_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__fast_load_start__
|
||||
ldr r1, =__fast_start__
|
||||
ldr r2, =__fast_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__ctors_load_start__
|
||||
ldr r1, =__ctors_start__
|
||||
ldr r2, =__ctors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__dtors_load_start__
|
||||
ldr r1, =__dtors_start__
|
||||
ldr r2, =__dtors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_load_start__
|
||||
ldr r1, =__rodata_start__
|
||||
ldr r2, =__rodata_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__tdata_load_start__
|
||||
ldr r1, =__tdata_start__
|
||||
ldr r2, =__tdata_end__
|
||||
bl memory_copy
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__data2_load_start__
|
||||
ldr r1, =__data2_start__
|
||||
ldr r2, =__data2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text2_load_start__
|
||||
ldr r1, =__text2_start__
|
||||
ldr r2, =__text2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata2_load_start__
|
||||
ldr r1, =__rodata2_start__
|
||||
ldr r2, =__rodata2_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__data_tcm_load_start__
|
||||
ldr r1, =__data_tcm_start__
|
||||
ldr r2, =__data_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_tcm_load_start__
|
||||
ldr r1, =__text_tcm_start__
|
||||
ldr r2, =__text_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_tcm_load_start__
|
||||
ldr r1, =__rodata_tcm_start__
|
||||
ldr r2, =__rodata_tcm_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Zero the bss. */
|
||||
ldr r0, =__bss_start__
|
||||
ldr r1, =__bss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
ldr r0, =__tbss_start__
|
||||
ldr r1, =__tbss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__bss2_start__
|
||||
ldr r1, =__bss2_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__bss_tcm_start__
|
||||
ldr r1, =__bss_tcm_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Initialize the heap */
|
||||
ldr r0, = __heap_start__
|
||||
ldr r1, = __heap_end__
|
||||
subs r1, r1, r0
|
||||
cmp r1, #8
|
||||
blt 1f
|
||||
movs r2, #0
|
||||
str r2, [r0]
|
||||
adds r0, r0, #4
|
||||
str r1, [r0]
|
||||
1:
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
ldr r2, =InitializeUserMemorySections
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Call constructors */
|
||||
ldr r0, =__ctors_start__
|
||||
ldr r1, =__ctors_end__
|
||||
ctor_loop:
|
||||
cmp r0, r1
|
||||
beq ctor_end
|
||||
ldr r2, [r0]
|
||||
adds r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b ctor_loop
|
||||
ctor_end:
|
||||
|
||||
/* Setup initial call frame */
|
||||
movs r0, #0
|
||||
mov lr, r0
|
||||
mov r12, sp
|
||||
|
||||
.type start, function
|
||||
start:
|
||||
/* Jump to application entry point */
|
||||
#ifdef FULL_LIBRARY
|
||||
movs r0, #ARGSSPACE
|
||||
ldr r1, =args
|
||||
ldr r2, =debug_getargs
|
||||
blx r2
|
||||
ldr r1, =args
|
||||
#else
|
||||
movs r0, #0
|
||||
movs r1, #0
|
||||
#endif
|
||||
ldr r2, =APP_ENTRY_POINT
|
||||
blx r2
|
||||
|
||||
.thumb_func
|
||||
exit:
|
||||
#ifdef FULL_LIBRARY
|
||||
mov r5, r0 // save the exit parameter/return result
|
||||
|
||||
/* Call destructors */
|
||||
ldr r0, =__dtors_start__
|
||||
ldr r1, =__dtors_end__
|
||||
dtor_loop:
|
||||
cmp r0, r1
|
||||
beq dtor_end
|
||||
ldr r2, [r0]
|
||||
add r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b dtor_loop
|
||||
dtor_end:
|
||||
|
||||
/* Call atexit functions */
|
||||
ldr r2, =_execute_at_exit_fns
|
||||
blx r2
|
||||
|
||||
/* Call debug_exit with return result/exit parameter */
|
||||
mov r0, r5
|
||||
ldr r2, =debug_exit
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Returned from application entry point, loop forever. */
|
||||
exit_loop:
|
||||
b exit_loop
|
||||
|
||||
.thumb_func
|
||||
memory_copy:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
subs r2, r2, r1
|
||||
beq 2f
|
||||
1:
|
||||
ldrb r3, [r0]
|
||||
adds r0, r0, #1
|
||||
strb r3, [r1]
|
||||
adds r1, r1, #1
|
||||
subs r2, r2, #1
|
||||
bne 1b
|
||||
2:
|
||||
bx lr
|
||||
|
||||
.thumb_func
|
||||
memory_set:
|
||||
cmp r0, r1
|
||||
beq 1f
|
||||
strb r2, [r0]
|
||||
adds r0, r0, #1
|
||||
b memory_set
|
||||
1:
|
||||
bx lr
|
||||
|
||||
// default C/C++ library helpers
|
||||
|
||||
.macro HELPER helper_name
|
||||
.section .text.\helper_name, "ax", %progbits
|
||||
.balign 2
|
||||
.global \helper_name
|
||||
.weak \helper_name
|
||||
\helper_name:
|
||||
.thumb_func
|
||||
.endm
|
||||
|
||||
.macro JUMPTO name
|
||||
#if defined(__thumb__) && !defined(__thumb2__)
|
||||
mov r12, r0
|
||||
ldr r0, =\name
|
||||
push {r0}
|
||||
mov r0, r12
|
||||
pop {pc}
|
||||
#else
|
||||
b \name
|
||||
#endif
|
||||
.endm
|
||||
|
||||
HELPER __aeabi_read_tp
|
||||
ldr r0, =__tbss_start__-8
|
||||
bx lr
|
||||
HELPER abort
|
||||
b .
|
||||
HELPER __assert
|
||||
b .
|
||||
HELPER __aeabi_assert
|
||||
b .
|
||||
HELPER __sync_synchronize
|
||||
bx lr
|
||||
HELPER __getchar
|
||||
JUMPTO debug_getchar
|
||||
HELPER __putchar
|
||||
JUMPTO debug_putchar
|
||||
HELPER __open
|
||||
JUMPTO debug_fopen
|
||||
HELPER __close
|
||||
JUMPTO debug_fclose
|
||||
HELPER __write
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fwrite
|
||||
HELPER __read
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fread
|
||||
HELPER __seek
|
||||
push {r4, lr}
|
||||
mov r4, r0
|
||||
bl debug_fseek
|
||||
cmp r0, #0
|
||||
bne 1f
|
||||
mov r0, r4
|
||||
bl debug_ftell
|
||||
pop {r4, pc}
|
||||
1:
|
||||
ldr r0, =-1
|
||||
pop {r4, pc}
|
||||
// char __user_locale_name_buffer[];
|
||||
.section .bss.__user_locale_name_buffer, "aw", %nobits
|
||||
.global __user_locale_name_buffer
|
||||
.weak __user_locale_name_buffer
|
||||
__user_locale_name_buffer:
|
||||
.word 0x0
|
||||
|
||||
#ifdef FULL_LIBRARY
|
||||
.bss
|
||||
args:
|
||||
.space ARGSSPACE
|
||||
#endif
|
||||
|
||||
/* Setup attibutes of stack and heap sections so they don't take up room in the elf file */
|
||||
.section .stack, "wa", %nobits
|
||||
.section .stack_process, "wa", %nobits
|
||||
.section .heap, "wa", %nobits
|
||||
|
||||
@@ -0,0 +1,128 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2017 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* NO_FPU_ENABLE *
|
||||
* *
|
||||
* If defined, FPU will not be enabled. *
|
||||
* *
|
||||
* NO_STACK_INIT *
|
||||
* *
|
||||
* If defined, the stack pointer will not be initialised. *
|
||||
* *
|
||||
* NO_SYSTEM_INIT *
|
||||
* *
|
||||
* If defined, the SystemInit() function will not be called. By default *
|
||||
* SystemInit() is called after reset to enable the clocks and memories to *
|
||||
* be initialised prior to any C startup initialisation. *
|
||||
* *
|
||||
* NO_VTOR_CONFIG *
|
||||
* *
|
||||
* If defined, the vector table offset register will not be configured. *
|
||||
* *
|
||||
* MEMORY_INIT *
|
||||
* *
|
||||
* If defined, the MemoryInit() function will be called. By default *
|
||||
* MemoryInit() is called after SystemInit() to enable an external memory *
|
||||
* controller. *
|
||||
* *
|
||||
* STACK_INIT_VAL *
|
||||
* *
|
||||
* If defined, specifies the initial stack pointer value. If undefined, *
|
||||
* the stack pointer will be initialised to point to the end of the *
|
||||
* RAM segment. *
|
||||
* *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, the exception vectors will be copied from Flash to RAM. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
|
||||
.global Reset_Handler
|
||||
.extern _vectors
|
||||
|
||||
.section .init, "ax"
|
||||
.thumb_func
|
||||
|
||||
.equ VTOR_REG, 0xE000ED08
|
||||
.equ FPU_CPACR_REG, 0xE000ED88
|
||||
|
||||
#ifndef STACK_INIT_VAL
|
||||
#define STACK_INIT_VAL __RAM_segment_end__
|
||||
#endif
|
||||
|
||||
Reset_Handler:
|
||||
#ifndef NO_STACK_INIT
|
||||
/* Initialise main stack */
|
||||
ldr r0, =STACK_INIT_VAL
|
||||
bic r0, #0x7
|
||||
mov sp, r0
|
||||
#endif
|
||||
|
||||
#ifndef NO_SYSTEM_INIT
|
||||
/* Initialise system */
|
||||
ldr r0, =SystemInit
|
||||
blx r0
|
||||
.pushsection .init_array, "aw", %init_array
|
||||
.word SystemCoreClockUpdate
|
||||
.popsection
|
||||
#endif
|
||||
|
||||
#ifdef MEMORY_INIT
|
||||
ldr r0, =MemoryInit
|
||||
blx r0
|
||||
#endif
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
/* Copy exception vectors into RAM */
|
||||
ldr r0, =__vectors_start__
|
||||
ldr r1, =__vectors_end__
|
||||
ldr r2, =__vectors_ram_start__
|
||||
1:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
ldr r3, [r0]
|
||||
str r3, [r2]
|
||||
adds r0, r0, #4
|
||||
adds r2, r2, #4
|
||||
b 1b
|
||||
2:
|
||||
#endif
|
||||
|
||||
#ifndef NO_VTOR_CONFIG
|
||||
/* Configure vector table offset register */
|
||||
ldr r0, =VTOR_REG
|
||||
#ifdef VECTORS_IN_RAM
|
||||
ldr r1, =_vectors_ram
|
||||
#else
|
||||
ldr r1, =_vectors
|
||||
#endif
|
||||
str r1, [r0]
|
||||
#endif
|
||||
|
||||
#if (defined(__ARM_ARCH_FPV4_SP_D16__) || defined(__ARM_ARCH_FPV5_D16__)) && !defined(NO_FPU_ENABLE)
|
||||
/* Enable FPU */
|
||||
ldr r0, =FPU_CPACR_REG
|
||||
ldr r1, [r0]
|
||||
orr r1, r1, #(0xF << 20)
|
||||
str r1, [r0]
|
||||
dsb
|
||||
isb
|
||||
#endif
|
||||
|
||||
/* Jump to program start */
|
||||
b _start
|
||||
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2017 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
function Reset() {
|
||||
TargetInterface.resetAndStop();
|
||||
}
|
||||
|
||||
function EnableTrace(traceInterfaceType) {
|
||||
// TODO: Enable trace
|
||||
}
|
||||
|
||||
@@ -0,0 +1,6 @@
|
||||
<!DOCTYPE Board_Memory_Definition_File>
|
||||
<root name="LPC4088FBD208">
|
||||
<MemorySegment name="FLASH" start="0x00000000" size="0x00080000" access="ReadOnly" />
|
||||
<MemorySegment name="RAM" start="0x10000000" size="0x00010000" access="Read/Write" />
|
||||
<MemorySegment name="RAM2" start="0x20000000" size="0x00008000" access="Read/Write" />
|
||||
</root>
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,458 @@
|
||||
/*****************************************************************************
|
||||
* SEGGER Microcontroller GmbH & Co. KG *
|
||||
* Solutions for real time microcontroller applications *
|
||||
*****************************************************************************
|
||||
* *
|
||||
* (c) 2017 SEGGER Microcontroller GmbH & Co. KG *
|
||||
* *
|
||||
* Internet: www.segger.com Support: support@segger.com *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
/*****************************************************************************
|
||||
* Preprocessor Definitions *
|
||||
* ------------------------ *
|
||||
* VECTORS_IN_RAM *
|
||||
* *
|
||||
* If defined, an area of RAM will large enough to store the vector table *
|
||||
* will be reserved. *
|
||||
* *
|
||||
*****************************************************************************/
|
||||
|
||||
.syntax unified
|
||||
.code 16
|
||||
|
||||
.section .init, "ax"
|
||||
.align 0
|
||||
|
||||
/*****************************************************************************
|
||||
* Default Exception Handlers *
|
||||
*****************************************************************************/
|
||||
|
||||
.thumb_func
|
||||
.weak NMI_Handler
|
||||
NMI_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak HardFault_Handler
|
||||
HardFault_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SVC_Handler
|
||||
SVC_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PendSV_Handler
|
||||
PendSV_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SysTick_Handler
|
||||
SysTick_Handler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
Dummy_Handler:
|
||||
b .
|
||||
|
||||
#if defined(__OPTIMIZATION_SMALL)
|
||||
|
||||
.weak WWDT_IRQHandler
|
||||
.thumb_set WWDT_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER0_IRQHandler
|
||||
.thumb_set TIMER0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER1_IRQHandler
|
||||
.thumb_set TIMER1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER2_IRQHandler
|
||||
.thumb_set TIMER2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak TIMER3_IRQHandler
|
||||
.thumb_set TIMER3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART0_IRQHandler
|
||||
.thumb_set UART0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART1_IRQHandler
|
||||
.thumb_set UART1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART2_IRQHandler
|
||||
.thumb_set UART2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART3_IRQHandler
|
||||
.thumb_set UART3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PWM1_IRQHandler
|
||||
.thumb_set PWM1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C0_IRQHandler
|
||||
.thumb_set I2C0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C1_IRQHandler
|
||||
.thumb_set I2C1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2C2_IRQHandler
|
||||
.thumb_set I2C2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP0_IRQHandler
|
||||
.thumb_set SSP0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP1_IRQHandler
|
||||
.thumb_set SSP1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EINT0_IRQHandler
|
||||
.thumb_set EINT0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EINT1_IRQHandler
|
||||
.thumb_set EINT1_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EINT2_IRQHandler
|
||||
.thumb_set EINT2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EINT3_IRQHandler
|
||||
.thumb_set EINT3_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ADC_IRQHandler
|
||||
.thumb_set ADC_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak BOD_IRQHandler
|
||||
.thumb_set BOD_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USB_IRQHandler
|
||||
.thumb_set USB_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CAN_IRQHandler
|
||||
.thumb_set CAN_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak GPDMA_IRQHandler
|
||||
.thumb_set GPDMA_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak I2S_IRQHandler
|
||||
.thumb_set I2S_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak ETHERNET_IRQHandler
|
||||
.thumb_set ETHERNET_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SDMMC_IRQHandler
|
||||
.thumb_set SDMMC_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak MCPWM_IRQHandler
|
||||
.thumb_set MCPWM_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak QEI_IRQHandler
|
||||
.thumb_set QEI_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak USB_NEED_CLK_IRQHandler
|
||||
.thumb_set USB_NEED_CLK_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak SSP2_IRQHandler
|
||||
.thumb_set SSP2_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak LCD_IRQHandler
|
||||
.thumb_set LCD_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak GPIOINT_IRQHandler
|
||||
.thumb_set GPIOINT_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak PWM0_IRQHandler
|
||||
.thumb_set PWM0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak EEPROM_IRQHandler
|
||||
.thumb_set EEPROM_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CMP0_IRQHandler
|
||||
.thumb_set CMP0_IRQHandler,Dummy_Handler
|
||||
|
||||
.weak CMP1_IRQHandler
|
||||
.thumb_set CMP1_IRQHandler,Dummy_Handler
|
||||
|
||||
#else
|
||||
|
||||
.thumb_func
|
||||
.weak WWDT_IRQHandler
|
||||
WWDT_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER0_IRQHandler
|
||||
TIMER0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER1_IRQHandler
|
||||
TIMER1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER2_IRQHandler
|
||||
TIMER2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak TIMER3_IRQHandler
|
||||
TIMER3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART0_IRQHandler
|
||||
UART0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART1_IRQHandler
|
||||
UART1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART2_IRQHandler
|
||||
UART2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART3_IRQHandler
|
||||
UART3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PWM1_IRQHandler
|
||||
PWM1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C0_IRQHandler
|
||||
I2C0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C1_IRQHandler
|
||||
I2C1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2C2_IRQHandler
|
||||
I2C2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP0_IRQHandler
|
||||
SSP0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP1_IRQHandler
|
||||
SSP1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak RTC_IRQHandler
|
||||
RTC_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EINT0_IRQHandler
|
||||
EINT0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EINT1_IRQHandler
|
||||
EINT1_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EINT2_IRQHandler
|
||||
EINT2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EINT3_IRQHandler
|
||||
EINT3_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ADC_IRQHandler
|
||||
ADC_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak BOD_IRQHandler
|
||||
BOD_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USB_IRQHandler
|
||||
USB_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CAN_IRQHandler
|
||||
CAN_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak GPDMA_IRQHandler
|
||||
GPDMA_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak I2S_IRQHandler
|
||||
I2S_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak ETHERNET_IRQHandler
|
||||
ETHERNET_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SDMMC_IRQHandler
|
||||
SDMMC_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak MCPWM_IRQHandler
|
||||
MCPWM_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak QEI_IRQHandler
|
||||
QEI_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak USB_NEED_CLK_IRQHandler
|
||||
USB_NEED_CLK_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak UART4_IRQHandler
|
||||
UART4_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak SSP2_IRQHandler
|
||||
SSP2_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak LCD_IRQHandler
|
||||
LCD_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak GPIOINT_IRQHandler
|
||||
GPIOINT_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak PWM0_IRQHandler
|
||||
PWM0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak EEPROM_IRQHandler
|
||||
EEPROM_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CMP0_IRQHandler
|
||||
CMP0_IRQHandler:
|
||||
b .
|
||||
|
||||
.thumb_func
|
||||
.weak CMP1_IRQHandler
|
||||
CMP1_IRQHandler:
|
||||
b .
|
||||
|
||||
#endif
|
||||
|
||||
/*****************************************************************************
|
||||
* Vector Table *
|
||||
*****************************************************************************/
|
||||
|
||||
.section .vectors, "ax"
|
||||
.align 0
|
||||
.global _vectors
|
||||
.extern __stack_end__
|
||||
.extern Reset_Handler
|
||||
|
||||
_vectors:
|
||||
.word __stack_end__
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word SVC_Handler
|
||||
.word 0 /* Reserved */
|
||||
.word 0 /* Reserved */
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDT_IRQHandler
|
||||
.word TIMER0_IRQHandler
|
||||
.word TIMER1_IRQHandler
|
||||
.word TIMER2_IRQHandler
|
||||
.word TIMER3_IRQHandler
|
||||
.word UART0_IRQHandler
|
||||
.word UART1_IRQHandler
|
||||
.word UART2_IRQHandler
|
||||
.word UART3_IRQHandler
|
||||
.word PWM1_IRQHandler
|
||||
.word I2C0_IRQHandler
|
||||
.word I2C1_IRQHandler
|
||||
.word I2C2_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word SSP0_IRQHandler
|
||||
.word SSP1_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word RTC_IRQHandler
|
||||
.word EINT0_IRQHandler
|
||||
.word EINT1_IRQHandler
|
||||
.word EINT2_IRQHandler
|
||||
.word EINT3_IRQHandler
|
||||
.word ADC_IRQHandler
|
||||
.word BOD_IRQHandler
|
||||
.word USB_IRQHandler
|
||||
.word CAN_IRQHandler
|
||||
.word GPDMA_IRQHandler
|
||||
.word I2S_IRQHandler
|
||||
.word ETHERNET_IRQHandler
|
||||
.word SDMMC_IRQHandler
|
||||
.word MCPWM_IRQHandler
|
||||
.word QEI_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word USB_NEED_CLK_IRQHandler
|
||||
.word Dummy_Handler /* Reserved */
|
||||
.word UART4_IRQHandler
|
||||
.word SSP2_IRQHandler
|
||||
.word LCD_IRQHandler
|
||||
.word GPIOINT_IRQHandler
|
||||
.word PWM0_IRQHandler
|
||||
.word EEPROM_IRQHandler
|
||||
.word CMP0_IRQHandler
|
||||
.word CMP1_IRQHandler
|
||||
_vectors_end:
|
||||
|
||||
#ifdef VECTORS_IN_RAM
|
||||
.section .vectors_ram, "ax"
|
||||
.align 0
|
||||
.global _vectors_ram
|
||||
|
||||
_vectors_ram:
|
||||
.space _vectors_end - _vectors, 0
|
||||
#endif
|
||||
@@ -0,0 +1,37 @@
|
||||
<!DOCTYPE Linker_Placement_File>
|
||||
<Root name="Flash Section Placement">
|
||||
<MemorySegment name="$(FLASH_NAME:FLASH)">
|
||||
<ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START:)" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".init_rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".text" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".dtors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ctors" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM_NAME:RAM);SRAM">
|
||||
<ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START:$(SRAM_START:))" />
|
||||
<ProgramSection alignment="4" load="No" name=".fast_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".data_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tbss" />
|
||||
<ProgramSection alignment="4" load="No" name=".tdata_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".non_init" />
|
||||
<ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" />
|
||||
<ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(FLASH2_NAME:FLASH2)">
|
||||
<ProgramSection alignment="4" load="Yes" name=".text2" />
|
||||
<ProgramSection alignment="4" load="Yes" name=".rodata2" />
|
||||
<ProgramSection alignment="4" load="Yes" runin=".data2_run" name=".data2" />
|
||||
</MemorySegment>
|
||||
<MemorySegment name="$(RAM2_NAME:RAM2)">
|
||||
<ProgramSection alignment="4" load="No" name=".data2_run" />
|
||||
<ProgramSection alignment="4" load="No" name=".bss2" />
|
||||
</MemorySegment>
|
||||
</Root>
|
||||
@@ -0,0 +1,120 @@
|
||||
<!DOCTYPE CrossStudio_Project_File>
|
||||
<solution Name="lpc40xx" target="8" version="2">
|
||||
<project Name="lpc40xx">
|
||||
<configuration
|
||||
Name="Common"
|
||||
Placement="Flash"
|
||||
Target="LPC4088FBD208"
|
||||
arm_architecture="v7EM"
|
||||
arm_core_type="Cortex-M4"
|
||||
arm_endian="Little"
|
||||
arm_fp_abi="Hard"
|
||||
arm_fpu_type="FPv4-SP-D16"
|
||||
arm_interwork="No"
|
||||
arm_linker_heap_size="256"
|
||||
arm_linker_process_stack_size="0"
|
||||
arm_linker_stack_size="256"
|
||||
arm_simulator_memory_simulation_parameter="ROM;0x00000000;0x00080000;RAM;0x10000000;0x00010000;RAM;0x20000000;0x00008000"
|
||||
arm_target_debug_interface_type="ADIv5"
|
||||
arm_target_device_name="LPC4088"
|
||||
arm_target_interface_type="SWD"
|
||||
build_treat_warnings_as_errors="Yes"
|
||||
c_preprocessor_definitions="CORE_M4;__LPC4000_FAMILY;__LPC408x_SUBFAMILY;ARM_MATH_CM4;FLASH_PLACEMENT=1;BOARD_EA4088QS;CFG_TUSB_MCU=OPT_MCU_LPC40XX;CFG_TUSB_MEM_SECTION= __attribute__((section(".bss2")))"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)/inc"
|
||||
debug_register_definition_file="$(ProjectDir)/LPC408x_7x_Registers.xml"
|
||||
debug_target_connection="J-Link"
|
||||
gcc_enable_all_warnings="Yes"
|
||||
gcc_entry_point="Reset_Handler"
|
||||
linker_memory_map_file="$(ProjectDir)/LPC4088FBD208_MemoryMap.xml"
|
||||
linker_section_placement_file="$(ProjectDir)/flash_placement.xml"
|
||||
macros="DeviceFamily=LPC4000;DeviceSubFamily=LPC408x;Target=LPC4088FBD208;Placement=Flash;rootDir=../../../../..;lpcDir=../../../../../hw/mcu/nxp/lpc_chip_40xx"
|
||||
package_dependencies="LPC4000"
|
||||
project_directory=""
|
||||
project_type="Executable"
|
||||
target_reset_script="Reset();"
|
||||
target_trace_initialize_script="EnableTrace("$(TraceInterfaceType)")" />
|
||||
<folder Name="System Files">
|
||||
<file file_name="thumb_crt0.s" />
|
||||
<file file_name="LPC4000_Startup.s" />
|
||||
<file file_name="LPC408x_7x_Vectors.s">
|
||||
<configuration Name="Common" file_type="Assembly" />
|
||||
</file>
|
||||
<file file_name="LPC4088FBD208_MemoryMap.xml" />
|
||||
<file file_name="flash_placement.xml" />
|
||||
<file file_name="LPC4000_Target.js">
|
||||
<configuration Name="Common" file_type="Reset Script" />
|
||||
</file>
|
||||
</folder>
|
||||
<configuration
|
||||
Name="EA4088 QuickStart"
|
||||
link_use_linker_script_file="No"
|
||||
linker_section_placement_file="flash_placement.xml" />
|
||||
<folder Name="hw">
|
||||
<folder Name="bsp">
|
||||
<file file_name="../../../../../hw/bsp/ansi_escape.h" />
|
||||
<file file_name="../../../../../hw/bsp/board.h" />
|
||||
<folder Name="ea4088qs">
|
||||
<file file_name="../../../../../hw/bsp/ea4088qs/board_ea4088qs.c" />
|
||||
<file file_name="../../../../../hw/bsp/ea4088qs/board_ea4088qs.h" />
|
||||
</folder>
|
||||
</folder>
|
||||
<folder Name="mcu">
|
||||
<folder Name="nxp">
|
||||
<folder Name="lpc_chip_40xx">
|
||||
<folder Name="inc">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/chip.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/chip_lpc175x_6x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/chip_lpc177x_8x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/chip_lpc407x_8x.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/clock_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/cmsis.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/cmsis_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/core_cm4.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/core_cm4_simd.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/core_cmFunc.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/core_cmInstr.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/gpio_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/sys_config.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/sysctl_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/uart_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/usb_17xx_40xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/inc/iocon_17xx_40xx.h" />
|
||||
</folder>
|
||||
<folder Name="src">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/src/chip_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/src/clock_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/src/gpio_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/src/iocon_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/src/sysctl_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/src/sysinit_17xx_40xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_40xx/src/uart_17xx_40xx.c" />
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
<folder
|
||||
Name="segger_rtt"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../lib/segger_rtt"
|
||||
recurse="No" />
|
||||
<folder
|
||||
Name="src"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../src"
|
||||
recurse="Yes" />
|
||||
<folder
|
||||
Name="tinyusb"
|
||||
exclude=""
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../src"
|
||||
recurse="Yes" />
|
||||
</project>
|
||||
<configuration
|
||||
Name="EA4088 QuickStart"
|
||||
c_preprocessor_definitions="DEBUG"
|
||||
gcc_debugging_level="Level 3"
|
||||
gcc_optimization_level="None" />
|
||||
</solution>
|
||||
@@ -0,0 +1,415 @@
|
||||
// **********************************************************************
|
||||
// * SEGGER Microcontroller GmbH *
|
||||
// * The Embedded Experts *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * (c) 2014 - 2018 SEGGER Microcontroller GmbH *
|
||||
// * (c) 2001 - 2018 Rowley Associates Limited *
|
||||
// * *
|
||||
// * www.segger.com Support: support@segger.com *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
// * *
|
||||
// * All rights reserved. *
|
||||
// * *
|
||||
// * Redistribution and use in source and binary forms, with or *
|
||||
// * without modification, are permitted provided that the following *
|
||||
// * conditions are met: *
|
||||
// * *
|
||||
// * - Redistributions of source code must retain the above copyright *
|
||||
// * notice, this list of conditions and the following disclaimer. *
|
||||
// * *
|
||||
// * - Neither the name of SEGGER Microcontroller GmbH *
|
||||
// * nor the names of its contributors may be used to endorse or *
|
||||
// * promote products derived from this software without specific *
|
||||
// * prior written permission. *
|
||||
// * *
|
||||
// * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
|
||||
// * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
|
||||
// * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
|
||||
// * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
|
||||
// * DISCLAIMED. *
|
||||
// * IN NO EVENT SHALL SEGGER Microcontroller GmbH BE LIABLE FOR *
|
||||
// * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
|
||||
// * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
|
||||
// * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
|
||||
// * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
|
||||
// * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
|
||||
// * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
|
||||
// * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
|
||||
// * DAMAGE. *
|
||||
// * *
|
||||
// **********************************************************************
|
||||
//
|
||||
//
|
||||
// Preprocessor Definitions
|
||||
// ------------------------
|
||||
// APP_ENTRY_POINT
|
||||
//
|
||||
// Defines the application entry point function, if undefined this setting
|
||||
// defaults to "main".
|
||||
//
|
||||
// INITIALIZE_STACK
|
||||
//
|
||||
// If defined, the contents of the stack will be initialized to a the
|
||||
// value 0xCC.
|
||||
//
|
||||
// INITIALIZE_SECONDARY_SECTIONS
|
||||
//
|
||||
// If defined, the .data2, .text2, .rodata2 and .bss2 sections will be initialized.
|
||||
//
|
||||
// INITIALIZE_TCM_SECTIONS
|
||||
//
|
||||
// If defined, the .data_tcm, .text_tcm, .rodata_tcm and .bss_tcm sections
|
||||
// will be initialized.
|
||||
//
|
||||
// INITIALIZE_USER_SECTIONS
|
||||
//
|
||||
// If defined, the function InitializeUserMemorySections will be called prior
|
||||
// to entering main in order to allow the user to initialize any user defined
|
||||
// memory sections.
|
||||
//
|
||||
// FULL_LIBRARY
|
||||
//
|
||||
// If defined then
|
||||
// - argc, argv are setup by the debug_getargs.
|
||||
// - the exit symbol is defined and executes on return from main.
|
||||
// - the exit symbol calls destructors, atexit functions and then debug_exit.
|
||||
//
|
||||
// If not defined then
|
||||
// - argc and argv are zero.
|
||||
// - the exit symbol is defined, executes on return from main and loops
|
||||
//
|
||||
|
||||
#ifndef APP_ENTRY_POINT
|
||||
#define APP_ENTRY_POINT main
|
||||
#endif
|
||||
|
||||
#ifndef ARGSSPACE
|
||||
#define ARGSSPACE 128
|
||||
#endif
|
||||
.syntax unified
|
||||
|
||||
.global _start
|
||||
.extern APP_ENTRY_POINT
|
||||
.global exit
|
||||
.weak exit
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
.extern InitializeUserMemorySections
|
||||
#endif
|
||||
|
||||
.section .init, "ax"
|
||||
.code 16
|
||||
.balign 2
|
||||
.thumb_func
|
||||
|
||||
_start:
|
||||
/* Set up main stack if size > 0 */
|
||||
ldr r1, =__stack_end__
|
||||
ldr r0, =__stack_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
mov sp, r1
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
ldr r0, =__stack_start__
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Set up process stack if size > 0 */
|
||||
ldr r1, =__stack_process_end__
|
||||
ldr r0, =__stack_process_start__
|
||||
subs r2, r1, r0
|
||||
beq 1f
|
||||
#ifdef __ARM_EABI__
|
||||
movs r2, #0x7
|
||||
bics r1, r2
|
||||
#endif
|
||||
msr psp, r1
|
||||
movs r2, #2
|
||||
msr control, r2
|
||||
#ifdef INITIALIZE_STACK
|
||||
movs r2, #0xCC
|
||||
bl memory_set
|
||||
#endif
|
||||
1:
|
||||
|
||||
/* Copy initialized memory sections into RAM (if necessary). */
|
||||
ldr r0, =__data_load_start__
|
||||
ldr r1, =__data_start__
|
||||
ldr r2, =__data_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_load_start__
|
||||
ldr r1, =__text_start__
|
||||
ldr r2, =__text_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__fast_load_start__
|
||||
ldr r1, =__fast_start__
|
||||
ldr r2, =__fast_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__ctors_load_start__
|
||||
ldr r1, =__ctors_start__
|
||||
ldr r2, =__ctors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__dtors_load_start__
|
||||
ldr r1, =__dtors_start__
|
||||
ldr r2, =__dtors_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_load_start__
|
||||
ldr r1, =__rodata_start__
|
||||
ldr r2, =__rodata_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__tdata_load_start__
|
||||
ldr r1, =__tdata_start__
|
||||
ldr r2, =__tdata_end__
|
||||
bl memory_copy
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__data2_load_start__
|
||||
ldr r1, =__data2_start__
|
||||
ldr r2, =__data2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text2_load_start__
|
||||
ldr r1, =__text2_start__
|
||||
ldr r2, =__text2_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata2_load_start__
|
||||
ldr r1, =__rodata2_start__
|
||||
ldr r2, =__rodata2_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__data_tcm_load_start__
|
||||
ldr r1, =__data_tcm_start__
|
||||
ldr r2, =__data_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__text_tcm_load_start__
|
||||
ldr r1, =__text_tcm_start__
|
||||
ldr r2, =__text_tcm_end__
|
||||
bl memory_copy
|
||||
ldr r0, =__rodata_tcm_load_start__
|
||||
ldr r1, =__rodata_tcm_start__
|
||||
ldr r2, =__rodata_tcm_end__
|
||||
bl memory_copy
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Zero the bss. */
|
||||
ldr r0, =__bss_start__
|
||||
ldr r1, =__bss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
ldr r0, =__tbss_start__
|
||||
ldr r1, =__tbss_end__
|
||||
movs r2, #0
|
||||
bl memory_set
|
||||
#ifdef INITIALIZE_SECONDARY_SECTIONS
|
||||
ldr r0, =__bss2_start__
|
||||
ldr r1, =__bss2_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_SECONDARY_SECTIONS */
|
||||
#ifdef INITIALIZE_TCM_SECTIONS
|
||||
ldr r0, =__bss_tcm_start__
|
||||
ldr r1, =__bss_tcm_end__
|
||||
mov r2, #0
|
||||
bl memory_set
|
||||
#endif /* #ifdef INITIALIZE_TCM_SECTIONS */
|
||||
|
||||
/* Initialize the heap */
|
||||
ldr r0, = __heap_start__
|
||||
ldr r1, = __heap_end__
|
||||
subs r1, r1, r0
|
||||
cmp r1, #8
|
||||
blt 1f
|
||||
movs r2, #0
|
||||
str r2, [r0]
|
||||
adds r0, r0, #4
|
||||
str r1, [r0]
|
||||
1:
|
||||
|
||||
#ifdef INITIALIZE_USER_SECTIONS
|
||||
ldr r2, =InitializeUserMemorySections
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Call constructors */
|
||||
ldr r0, =__ctors_start__
|
||||
ldr r1, =__ctors_end__
|
||||
ctor_loop:
|
||||
cmp r0, r1
|
||||
beq ctor_end
|
||||
ldr r2, [r0]
|
||||
adds r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b ctor_loop
|
||||
ctor_end:
|
||||
|
||||
/* Setup initial call frame */
|
||||
movs r0, #0
|
||||
mov lr, r0
|
||||
mov r12, sp
|
||||
|
||||
.type start, function
|
||||
start:
|
||||
/* Jump to application entry point */
|
||||
#ifdef FULL_LIBRARY
|
||||
movs r0, #ARGSSPACE
|
||||
ldr r1, =args
|
||||
ldr r2, =debug_getargs
|
||||
blx r2
|
||||
ldr r1, =args
|
||||
#else
|
||||
movs r0, #0
|
||||
movs r1, #0
|
||||
#endif
|
||||
ldr r2, =APP_ENTRY_POINT
|
||||
blx r2
|
||||
|
||||
.thumb_func
|
||||
exit:
|
||||
#ifdef FULL_LIBRARY
|
||||
mov r5, r0 // save the exit parameter/return result
|
||||
|
||||
/* Call destructors */
|
||||
ldr r0, =__dtors_start__
|
||||
ldr r1, =__dtors_end__
|
||||
dtor_loop:
|
||||
cmp r0, r1
|
||||
beq dtor_end
|
||||
ldr r2, [r0]
|
||||
add r0, #4
|
||||
push {r0-r1}
|
||||
blx r2
|
||||
pop {r0-r1}
|
||||
b dtor_loop
|
||||
dtor_end:
|
||||
|
||||
/* Call atexit functions */
|
||||
ldr r2, =_execute_at_exit_fns
|
||||
blx r2
|
||||
|
||||
/* Call debug_exit with return result/exit parameter */
|
||||
mov r0, r5
|
||||
ldr r2, =debug_exit
|
||||
blx r2
|
||||
#endif
|
||||
|
||||
/* Returned from application entry point, loop forever. */
|
||||
exit_loop:
|
||||
b exit_loop
|
||||
|
||||
.thumb_func
|
||||
memory_copy:
|
||||
cmp r0, r1
|
||||
beq 2f
|
||||
subs r2, r2, r1
|
||||
beq 2f
|
||||
1:
|
||||
ldrb r3, [r0]
|
||||
adds r0, r0, #1
|
||||
strb r3, [r1]
|
||||
adds r1, r1, #1
|
||||
subs r2, r2, #1
|
||||
bne 1b
|
||||
2:
|
||||
bx lr
|
||||
|
||||
.thumb_func
|
||||
memory_set:
|
||||
cmp r0, r1
|
||||
beq 1f
|
||||
strb r2, [r0]
|
||||
adds r0, r0, #1
|
||||
b memory_set
|
||||
1:
|
||||
bx lr
|
||||
|
||||
// default C/C++ library helpers
|
||||
|
||||
.macro HELPER helper_name
|
||||
.section .text.\helper_name, "ax", %progbits
|
||||
.balign 2
|
||||
.global \helper_name
|
||||
.weak \helper_name
|
||||
\helper_name:
|
||||
.thumb_func
|
||||
.endm
|
||||
|
||||
.macro JUMPTO name
|
||||
#if defined(__thumb__) && !defined(__thumb2__)
|
||||
mov r12, r0
|
||||
ldr r0, =\name
|
||||
push {r0}
|
||||
mov r0, r12
|
||||
pop {pc}
|
||||
#else
|
||||
b \name
|
||||
#endif
|
||||
.endm
|
||||
|
||||
HELPER __aeabi_read_tp
|
||||
ldr r0, =__tbss_start__-8
|
||||
bx lr
|
||||
HELPER abort
|
||||
b .
|
||||
HELPER __assert
|
||||
b .
|
||||
HELPER __aeabi_assert
|
||||
b .
|
||||
HELPER __sync_synchronize
|
||||
bx lr
|
||||
HELPER __getchar
|
||||
JUMPTO debug_getchar
|
||||
HELPER __putchar
|
||||
JUMPTO debug_putchar
|
||||
HELPER __open
|
||||
JUMPTO debug_fopen
|
||||
HELPER __close
|
||||
JUMPTO debug_fclose
|
||||
HELPER __write
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fwrite
|
||||
HELPER __read
|
||||
mov r3, r0
|
||||
mov r0, r1
|
||||
movs r1, #1
|
||||
JUMPTO debug_fread
|
||||
HELPER __seek
|
||||
push {r4, lr}
|
||||
mov r4, r0
|
||||
bl debug_fseek
|
||||
cmp r0, #0
|
||||
bne 1f
|
||||
mov r0, r4
|
||||
bl debug_ftell
|
||||
pop {r4, pc}
|
||||
1:
|
||||
ldr r0, =-1
|
||||
pop {r4, pc}
|
||||
// char __user_locale_name_buffer[];
|
||||
.section .bss.__user_locale_name_buffer, "aw", %nobits
|
||||
.global __user_locale_name_buffer
|
||||
.weak __user_locale_name_buffer
|
||||
__user_locale_name_buffer:
|
||||
.word 0x0
|
||||
|
||||
#ifdef FULL_LIBRARY
|
||||
.bss
|
||||
args:
|
||||
.space ARGSSPACE
|
||||
#endif
|
||||
|
||||
/* Setup attibutes of stack and heap sections so they don't take up room in the elf file */
|
||||
.section .stack, "wa", %nobits
|
||||
.section .stack_process, "wa", %nobits
|
||||
.section .heap, "wa", %nobits
|
||||
|
||||
@@ -20,15 +20,16 @@
|
||||
arm_target_interface_type="SWD"
|
||||
build_treat_warnings_as_errors="Yes"
|
||||
c_preprocessor_definitions="CORE_M4;__LPC4300_FAMILY;__LPC435x_SUBFAMILY;ARM_MATH_CM4;FLASH_PLACEMENT=1;BOARD_EA4357;CFG_TUSB_MCU=OPT_MCU_LPC43XX;CFG_TUSB_MEM_SECTION= __attribute__((section(".bss2")))"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw/cmsis/Include;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)/CMSIS_LPC43xx_DriverLib/inc"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(lpcDir)//inc;$(lpcDir)//inc/config_43xx"
|
||||
debug_register_definition_file="LPC43xx_Registers.xml"
|
||||
debug_target_connection="J-Link"
|
||||
gcc_enable_all_warnings="Yes"
|
||||
gcc_entry_point="Reset_Handler"
|
||||
link_use_linker_script_file="No"
|
||||
linker_memory_map_file="LPC4357 Cortex-M4_MemoryMap.xml"
|
||||
linker_section_placement_file="flash_placement.xml"
|
||||
linker_section_placements_segments="FLASH RX 0x1a000000 0x00080000;RAM RWX 0x10000000 0x00008000"
|
||||
macros="DeviceFamily=LPC4300;DeviceSubFamily=LPC435x;Target=LPC4357 Cortex-M4;Placement=Flash;rootDir=../../../../..;lpcDir=../../../../../hw/mcu/nxp/lpc43xx"
|
||||
macros="DeviceFamily=LPC4300;DeviceSubFamily=LPC435x;Target=LPC4357 Cortex-M4;Placement=Flash;rootDir=../../../../..;lpcDir=../../../../../hw/mcu/nxp/lpc_chip_43xx"
|
||||
project_directory=""
|
||||
project_type="Executable"
|
||||
target_reset_script="Reset();"
|
||||
@@ -47,24 +48,61 @@
|
||||
<folder Name="ea4357">
|
||||
<file file_name="../../../../../hw/bsp/ea4357/board_ea4357.c" />
|
||||
<file file_name="../../../../../hw/bsp/ea4357/board_ea4357.h" />
|
||||
<folder Name="oem_base_board">
|
||||
<file file_name="../../../../../hw/bsp/ea4357/oem_base_board/pca9532.c" />
|
||||
<file file_name="../../../../../hw/bsp/ea4357/oem_base_board/pca9532.h" />
|
||||
</folder>
|
||||
<file file_name="../../../../../hw/bsp/ea4357/pca9532.c" />
|
||||
<file file_name="../../../../../hw/bsp/ea4357/pca9532.h" />
|
||||
</folder>
|
||||
</folder>
|
||||
<folder Name="mcu">
|
||||
<folder Name="nxp">
|
||||
<folder Name="lpc43xx">
|
||||
<folder Name="CMSIS_LPC43xx_DriverLib">
|
||||
<folder Name="src">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/system_LPC43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_gpio.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_cgu.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_scu.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_i2c.c" />
|
||||
<folder Name="lpc_chip_43xx">
|
||||
<folder Name="inc">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/arm_common_tables.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/arm_math.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/cguccu_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/chip.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/chip_clocks.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/chip_lpc18xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/chip_lpc43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/clock_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/cmsis.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/cmsis_18xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/cmsis_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/cmsis_43xx_m0app.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/cmsis_43xx_m0sub.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/core_cm0.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/core_cm0plus.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/core_cm3.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/core_cm4.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/core_cm4_simd.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/core_cmFunc.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/core_cmInstr.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/core_sc000.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/core_sc300.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/creg_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/fpu_init.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/gpio_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/i2c_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/i2c_common_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/i2cm_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/lpc_types.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/packing.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/uart_18xx_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/usbhs_18xx_43xx.h" />
|
||||
<folder Name="config_43xx">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/config_43xx/cmsis_43xx.h" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/inc/config_43xx/sys_config.h" />
|
||||
</folder>
|
||||
</folder>
|
||||
<folder Name="src">
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/src/chip_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/src/clock_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/src/fpu_init.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/src/gpio_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/src/i2c_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/src/i2cm_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/src/sysinit_18xx_43xx.c" />
|
||||
<file file_name="../../../../../hw/mcu/nxp/lpc_chip_43xx/src/uart_18xx_43xx.c" />
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
</folder>
|
||||
|
||||
@@ -23,6 +23,7 @@
|
||||
c_user_include_directories="../../src;$(rootDir)/hw/cmsis/Include;$(rootDir)/hw;$(rootDir)/src;$(nrfxDir)/..;$(nrfxDir);$(nrfxDir)/mdk;$(nrfxDir)/hal;$(nrfxDir)/drivers/include"
|
||||
debug_register_definition_file="nrf52840_Registers.xml"
|
||||
debug_target_connection="J-Link"
|
||||
gcc_enable_all_warnings="Yes"
|
||||
gcc_entry_point="Reset_Handler"
|
||||
link_use_linker_script_file="No"
|
||||
linker_memory_map_file="nRF52840_xxAA_MemoryMap.xml"
|
||||
@@ -104,6 +105,7 @@
|
||||
filter="*.c;*.h"
|
||||
path="../../../../../lib/segger_rtt"
|
||||
recurse="No" />
|
||||
<configuration Name="pca10056" build_treat_warnings_as_errors="No" />
|
||||
</project>
|
||||
<configuration Name="pca10056" />
|
||||
</solution>
|
||||
|
||||
@@ -19,9 +19,10 @@
|
||||
arm_target_interface_type="SWD"
|
||||
build_treat_warnings_as_errors="Yes"
|
||||
c_preprocessor_definitions="__SAMD21G18A__;__SAMD21_FAMILY;__SAM_D21_SUBFAMILY;ARM_MATH_CM0PLUS;FLASH_PLACEMENT=1;USE_SIMPLE_ASSERT;CONF_XOSC32K_CONFIG=1;CONF_OSC32K_ENABLE=1;CONF_OSC32K_EN32K=1;CONF_XOSC32K_STARTUP=CONF_XOSC32K_STARTUP_TIME_2000092MCS;CONF_DFLL_ONDEMAND=0;CONF_DFLL_OVERWRITE_CALIBRATION=0;BOARD_METRO_M0_EXPRESS;CFG_TUSB_MCU=OPT_MCU_SAMD21"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw/cmsis/Include;$(rootDir)/hw;$(rootDir)/src;$(asf4Dir);$(asf4Dir)/include;$(asf4Dir)/config;$(asf4Dir)/hri;$(asf4Dir)/hal/include;$(asf4Dir)/hal/utils/include;$(asf4Dir)/hpl/port;$(asf4Dir)/hpl/gclk;$(asf4Dir)/hpl/pm"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(asf4Dir);$(asf4Dir)/CMSIS/Include;$(asf4Dir)/include;$(asf4Dir)/config;$(asf4Dir)/hri;$(asf4Dir)/hal/include;$(asf4Dir)/hal/utils/include;$(asf4Dir)/hpl/port;$(asf4Dir)/hpl/gclk;$(asf4Dir)/hpl/pm"
|
||||
debug_register_definition_file="ATSAMD21G18A_Registers.xml"
|
||||
debug_target_connection="J-Link"
|
||||
gcc_enable_all_warnings="Yes"
|
||||
gcc_entry_point="Reset_Handler"
|
||||
link_use_linker_script_file="No"
|
||||
linker_memory_map_file="$(ProjectDir)/ATSAMD21G18A_MemoryMap.xml"
|
||||
@@ -57,9 +58,6 @@
|
||||
<file file_name="../../../../../hw/mcu/microchip/samd/asf4/samd21/gcc/system_samd21.c" />
|
||||
</folder>
|
||||
<folder Name="hpl">
|
||||
<folder Name="core">
|
||||
<file file_name="../../../../../hw/mcu/microchip/samd/asf4/samd21/hpl/core/hpl_init.c" />
|
||||
</folder>
|
||||
<folder Name="gclk">
|
||||
<file file_name="../../../../../hw/mcu/microchip/samd/asf4/samd21/hpl/gclk/hpl_gclk.c" />
|
||||
</folder>
|
||||
|
||||
@@ -20,9 +20,10 @@
|
||||
arm_target_interface_type="SWD"
|
||||
build_treat_warnings_as_errors="Yes"
|
||||
c_preprocessor_definitions="__SAMD51_FAMILY;__SAMD51J19A__;ARM_MATH_CM4;FLASH_PLACEMENT=1;USE_SIMPLE_ASSERT;BOARD_METRO_M4_EXPRESS;CFG_TUSB_MCU=OPT_MCU_SAMD51"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw/cmsis/Include;$(rootDir)/hw;$(rootDir)/src;$(asf4Dir);$(asf4Dir)/include;$(asf4Dir)/config;$(asf4Dir)/hri;$(asf4Dir)/hal/include;$(asf4Dir)/hal/utils/include;$(asf4Dir)/hpl/port;$(asf4Dir)/hpl/gclk"
|
||||
c_user_include_directories="../../src;$(rootDir)/hw;$(rootDir)/src;$(asf4Dir);$(asf4Dir)/CMSIS/Include;$(asf4Dir)/include;$(asf4Dir)/config;$(asf4Dir)/hri;$(asf4Dir)/hal/include;$(asf4Dir)/hal/utils/include;$(asf4Dir)/hpl/port;$(asf4Dir)/hpl/gclk"
|
||||
debug_register_definition_file="ATSAMD51J19A_Registers.xml"
|
||||
debug_target_connection="J-Link"
|
||||
gcc_enable_all_warnings="Yes"
|
||||
gcc_entry_point="Reset_Handler"
|
||||
link_use_linker_script_file="No"
|
||||
linker_memory_map_file="ATSAMD51J19A_MemoryMap.xml"
|
||||
@@ -58,9 +59,6 @@
|
||||
<file file_name="../../../../../hw/mcu/microchip/samd/asf4/samd51/gcc/system_samd51.c" />
|
||||
</folder>
|
||||
<folder Name="hpl">
|
||||
<folder Name="core">
|
||||
<file file_name="../../../../../hw/mcu/microchip/samd/asf4/samd51/hpl/core/hpl_init.c" />
|
||||
</folder>
|
||||
<folder Name="osc32kctrl">
|
||||
<file file_name="../../../../../hw/mcu/microchip/samd/asf4/samd51/hpl/osc32kctrl/hpl_osc32kctrl.c" />
|
||||
</folder>
|
||||
|
||||
@@ -46,7 +46,6 @@
|
||||
//--------------------------------------------------------------------+
|
||||
// MACRO CONSTANT TYPEDEF PROTYPES
|
||||
//--------------------------------------------------------------------+
|
||||
void print_greeting(void);
|
||||
void led_blinking_task(void);
|
||||
|
||||
extern void virtual_com_task(void);
|
||||
@@ -56,13 +55,13 @@ extern void usb_hid_task(void);
|
||||
int main(void)
|
||||
{
|
||||
board_init();
|
||||
print_greeting();
|
||||
|
||||
tusb_init();
|
||||
|
||||
while (1)
|
||||
{
|
||||
tusb_task();
|
||||
// tinyusb device task
|
||||
tud_task();
|
||||
|
||||
led_blinking_task();
|
||||
|
||||
@@ -84,9 +83,9 @@ int main(void)
|
||||
#if CFG_TUD_CDC
|
||||
void virtual_com_task(void)
|
||||
{
|
||||
// connected and there are data available
|
||||
if ( tud_cdc_connected() )
|
||||
{
|
||||
// connected and there are data available
|
||||
if ( tud_cdc_available() )
|
||||
{
|
||||
uint8_t buf[64];
|
||||
@@ -94,10 +93,15 @@ void virtual_com_task(void)
|
||||
// read and echo back
|
||||
uint32_t count = tud_cdc_read(buf, sizeof(buf));
|
||||
|
||||
tud_cdc_write(buf, count);
|
||||
}
|
||||
for(uint32_t i=0; i<count; i++)
|
||||
{
|
||||
tud_cdc_write_char(buf[i]);
|
||||
|
||||
tud_cdc_write_flush();
|
||||
if ( buf[i] == '\r' ) tud_cdc_write_char('\n');
|
||||
}
|
||||
|
||||
tud_cdc_write_flush();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -108,8 +112,8 @@ void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
|
||||
// connected
|
||||
if ( dtr && rts )
|
||||
{
|
||||
// print greeting
|
||||
tud_cdc_write_str("tinyusb usb cdc\n");
|
||||
// print initial message when connected
|
||||
tud_cdc_write_str("\r\nTinyUSB CDC MSC HID device example\r\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
@@ -187,6 +191,7 @@ void tud_umount_cb(void)
|
||||
|
||||
void tud_cdc_rx_cb(uint8_t itf)
|
||||
{
|
||||
(void) itf;
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
@@ -200,31 +205,6 @@ void led_blinking_task(void)
|
||||
if ( !tu_timeout_expired(&tm) ) return; // not enough time
|
||||
tu_timeout_reset(&tm);
|
||||
|
||||
board_led_control(BOARD_LED0, led_state);
|
||||
board_led_control(led_state);
|
||||
led_state = 1 - led_state; // toggle
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// HELPER FUNCTION
|
||||
//--------------------------------------------------------------------+
|
||||
void print_greeting(void)
|
||||
{
|
||||
char const * const rtos_name[] =
|
||||
{
|
||||
[OPT_OS_NONE] = "None",
|
||||
[OPT_OS_FREERTOS] = "FreeRTOS",
|
||||
};
|
||||
|
||||
printf("\n--------------------------------------------------------------------\n");
|
||||
printf("- Device Demo (a tinyusb example)\n");
|
||||
printf("- if you find any bugs or get any questions, feel free to file an\n");
|
||||
printf("- issue at https://github.com/hathach/tinyusb\n");
|
||||
printf("--------------------------------------------------------------------\n\n");
|
||||
|
||||
printf("This DEVICE demo is configured to support:");
|
||||
printf(" - RTOS = %s\n", rtos_name[CFG_TUSB_OS]);
|
||||
if (CFG_TUD_CDC ) puts(" - Communication Device Class");
|
||||
if (CFG_TUD_MSC ) puts(" - Mass Storage");
|
||||
if (CFG_TUD_HID_KEYBOARD ) puts(" - HID Keyboard");
|
||||
if (CFG_TUD_HID_MOUSE ) puts(" - HID Mouse");
|
||||
}
|
||||
|
||||
@@ -41,6 +41,12 @@
|
||||
|
||||
#if CFG_TUD_MSC
|
||||
|
||||
// Some MCU doesn't have enough 8KB SRAM to store the whole disk
|
||||
// We will use Flash as read-only disk
|
||||
#if CFG_TUSB_MCU == OPT_MCU_LPC13XX
|
||||
#define DISK_READONLY
|
||||
#endif
|
||||
|
||||
#define README_CONTENTS \
|
||||
"This is tinyusb's MassStorage Class demo.\r\n\r\n\
|
||||
If you find any bugs or get any questions, feel free to file an\r\n\
|
||||
@@ -52,7 +58,10 @@ enum
|
||||
DISK_BLOCK_SIZE = 512
|
||||
};
|
||||
|
||||
uint8_t msc_device_ramdisk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
|
||||
#ifdef DISK_READONLY
|
||||
const
|
||||
#endif
|
||||
uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
|
||||
{
|
||||
//------------- Boot Sector -------------//
|
||||
// byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM;
|
||||
@@ -99,7 +108,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff
|
||||
{
|
||||
(void) lun;
|
||||
|
||||
uint8_t* addr = msc_device_ramdisk[lba] + offset;
|
||||
uint8_t const* addr = msc_disk[lba] + offset;
|
||||
memcpy(buffer, addr, bufsize);
|
||||
|
||||
return bufsize;
|
||||
@@ -111,8 +120,12 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t*
|
||||
{
|
||||
(void) lun;
|
||||
|
||||
uint8_t* addr = msc_device_ramdisk[lba] + offset;
|
||||
#ifndef DISK_READONLY
|
||||
uint8_t* addr = msc_disk[lba] + offset;
|
||||
memcpy(addr, buffer, bufsize);
|
||||
#else
|
||||
(void) lba; (void) offset; (void) buffer;
|
||||
#endif
|
||||
|
||||
return bufsize;
|
||||
}
|
||||
|
||||
@@ -39,9 +39,6 @@
|
||||
#ifndef _TUSB_CONFIG_H_
|
||||
#define _TUSB_CONFIG_H_
|
||||
|
||||
#include "tusb_option.h"
|
||||
#include "bsp/board.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
@@ -52,10 +49,15 @@
|
||||
|
||||
// defined by compiler flags for flexibility
|
||||
#ifndef CFG_TUSB_MCU
|
||||
#error CFG_TUSB_MCU should be defined using compiler flags
|
||||
#error CFG_TUSB_MCU must be defined
|
||||
#endif
|
||||
|
||||
#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
|
||||
#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
|
||||
#else
|
||||
#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE
|
||||
#endif
|
||||
|
||||
#define CFG_TUSB_DEBUG 2
|
||||
#define CFG_TUSB_OS OPT_OS_NONE
|
||||
|
||||
@@ -88,12 +90,22 @@
|
||||
*/
|
||||
#define CFG_TUD_DESC_AUTO 1
|
||||
|
||||
/* USB VID/PID if not defined, tinyusb to use default value
|
||||
/* If USB VID/PID is not defined, tinyusb will use default value
|
||||
* Note: different class combination e.g CDC and (CDC + MSC) should have different
|
||||
* PID since Host OS will "remembered" device driver after the first plug */
|
||||
// #define CFG_TUD_DESC_VID 0xCAFE
|
||||
// #define CFG_TUD_DESC_PID 0x0001
|
||||
|
||||
// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
|
||||
// Therefor we need to force endpoint number to correct type on lpc17xx
|
||||
#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
|
||||
#define CFG_TUD_DESC_CDC_EPNUM_NOTIF 1
|
||||
#define CFG_TUD_DESC_CDC_EPNUM 2
|
||||
#define CFG_TUD_DESC_MSC_EPNUM 5
|
||||
#define CFG_TUD_DESC_HID_KEYBOARD_EPNUM 4
|
||||
#define CFG_TUD_DESC_HID_MOUSE_EPNUM 7
|
||||
#endif
|
||||
|
||||
//------------- CLASS -------------//
|
||||
#define CFG_TUD_CDC 1
|
||||
#define CFG_TUD_MSC 0
|
||||
@@ -109,7 +121,6 @@
|
||||
#define CFG_TUD_HID_KEYBOARD_BOOT 1
|
||||
#define CFG_TUD_HID_MOUSE_BOOT 1
|
||||
|
||||
|
||||
//--------------------------------------------------------------------
|
||||
// CDC
|
||||
//--------------------------------------------------------------------
|
||||
@@ -121,7 +132,6 @@
|
||||
//--------------------------------------------------------------------
|
||||
// MSC
|
||||
//--------------------------------------------------------------------
|
||||
|
||||
// Number of supported Logical Unit Number (At least 1)
|
||||
#define CFG_TUD_MSC_MAXLUN 1
|
||||
|
||||
|
||||
Reference in New Issue
Block a user