jesus/tinyusb
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dcd_set_address include status response, usbd control stall both control in and out

Browse Source
This commit is contained in:
hathach
2019-03-13 23:14:48 +07:00
parent 195a44172a
commit eda56769b9
16 changed files with 63 additions and 55 deletions
Download Patch File Download Diff File Expand all files Collapse all files
hw/bsp/mcb1800/board_mcb1800.c
+15 -8
View File
@@ -88,14 +88,14 @@ static const PINMUX_GRP_T pinclockmuxing[] =
// Invoked by startup code
void SystemInit(void)
{
/* Setup system level pin muxing */
Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
/* Setup system level pin muxing */
Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
/* Clock pins only, group field not used */
for (int i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++)
{
Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc);
}
/* Clock pins only, group field not used */
for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++)
{
Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc);
}
Chip_SetupXtalClocking();
}
@@ -115,7 +115,7 @@ void board_init(void)
const uint8_t ledports[] = {6, 6, 6, 6, 6, 4, 4, 4};
const uint8_t ledbits[] = {24, 25, 26, 27, 28, 12, 13, 14};
for (int i = 0; i < (sizeof(ledports) / sizeof(ledports[0])); i++)
for (uint32_t i = 0; i < (sizeof(ledports) / sizeof(ledports[0])); i++)
{
Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, ledports[i], ledbits[i]);
Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, false);
@@ -197,10 +197,14 @@ void board_led_control(bool state)
}
//------------- Buttons -------------//
/*
static bool button_read(uint8_t id)
{
(void) id;
// return !TU_BIT_TEST( GPIO_ReadValue(buttons[id].gpio_port), buttons[id].gpio_pin ); // button is active low
return false;
}
*/
uint32_t board_buttons(void)
{
@@ -216,9 +220,12 @@ uint32_t board_buttons(void)
uint8_t board_uart_getchar(void)
{
//return UART_ReceiveByte(BOARD_UART_PORT);
return 0;
}
void board_uart_putchar(uint8_t c)
{
(void) c;
//UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING);
}