351581537f
Removes redundant SOF processing from the Renesas RX family.
...
The same logic regarding the resume signal was implemented by usbd.
See also: #1023
2021-08-19 22:51:10 +09:00
3a248951e2
Merge pull request #1024 from HiFiPhile/nuc
...
Fix nuc126 buffer copy with IAR
2021-08-18 19:14:03 +07:00
830757d9ce
Merge pull request #1020 from hathach/rp2040-disconnect-suspend
...
Add Rp2040 suspend & resume support
2021-08-18 16:45:35 +07:00
3e8276846e
correct usb memcpy for nuc120 as well
2021-08-18 16:38:13 +07:00
7aff4b178e
use USBD_MemCopy.
2021-08-17 00:53:12 +02:00
26d347be17
add note for renesas rx remote wakeup
2021-08-16 20:24:07 +07:00
ab2eec77d4
complete suspend, resume, remote wakeup for nrf52
2021-08-16 20:22:14 +07:00
2bb63406e9
Merge pull request #959 from KarlK90/gd32vf103-support-tiny-usb
...
[PORT] Add GD32VF103 support and Sipeed Longan Nano Board support
2021-08-15 18:50:00 +07:00
09e4348adc
move gd32vf103 to its own family
2021-08-15 17:19:25 +07:00
6af1950c8d
synopsys clear DAD on bus_reset
2021-08-14 01:51:13 +07:00
0ec794376b
Fix dcd_set_address bug when called more than once with different
...
addresses (e.g. after plugging the device into a different port).
2021-08-13 14:11:14 +02:00
17ef9f4843
add ready check for edpt claim
2021-08-12 15:54:04 +07:00
4ad47d9e26
bus_reset will reset all endpoints
...
allow for dynamic configuration as well as state-less enumeration
2021-08-12 15:40:26 +07:00
cde607338d
da1469x: Fix no VBUS startup
...
For self powered device if device started without VBUS present
it would not be correctly attached to USB bus even if tusb_vbus_changed()
was later called.
This modifies dcd_init() so it starts USB state machine without checking
if VBUS is present or not, like all others drivers do.
tusb_vbus_changed() function is also removed its content was moved to dcd_init.
2021-08-12 09:12:25 +02:00
4f2999bc04
white space
2021-08-12 00:31:26 +07:00
88d4cb402d
simplify hw_endpoint_init()
2021-08-12 00:11:04 +07:00
a2baf9427d
more dcd clean up
2021-08-11 20:36:23 +07:00
979af6c2a8
clean up endpoint set/clear stall
2021-08-11 20:29:39 +07:00
f3a6e564ee
rp2040 enable suspend and resume interrupt
2021-08-11 20:06:57 +07:00
2c7bb540b4
dcd_da1469x: Use mcu.h instead of MCU specific header
...
dcd_da1469x can work with broader range of MCUs that
share same USB core.
Specific header file that was used DA1469xAB.h now it is changed
to mcu/mcu.h which includes actual MCU specific register file.
2021-08-10 20:26:51 +02:00
ea72d64992
STM32L151 portable driver adaptations
2021-08-08 08:30:52 +02:00
4cebde65ec
Remove unnecessary define guard
...
The GD32VF103 family only has USB-OTG peripherals.
2021-08-07 12:00:13 +02:00
c6d495d643
Remove dependencies to external libraries for the dcd driver
...
The core of tinyusb must be as independent as possible, we previously
relied on nuclei-sdk or the GD32VF103 firmware library for the synopsys
driver to work with the GD32VF103. Fortunatly we needed very few parts
from them so we implement them here.
2021-08-07 08:55:25 +02:00
88f5c04fe0
Merge pull request #985 from HiFiPhile/same70
...
SAMx7x improvements
2021-08-06 11:32:57 +07:00
a698dda67e
Minor fix.
2021-08-05 09:56:24 +02:00
3eb54d878a
Add stm32 license header
2021-08-03 20:21:06 +02:00
2657560b63
Add hacky GD32VF103 support
2021-08-03 20:00:35 +02:00
45e55a8ea0
fix: D0FIFOSEL setting was incorrectly when big-endian is selected.
...
In pipe_xfer_in(), the endianness setting of D0FIFOSEL was lacking due to refactoring.
And add type cast operation to avoid warnings by CCRX.
2021-07-31 12:20:19 +09:00
383290a634
Move register define to separate header.
2021-07-30 21:15:58 +02:00
c4cd36980d
Add cache clean/invalidate.
2021-07-30 12:07:23 +02:00
e7c9cf4aea
Change the accessing method of TU_FIFO from read/write_n_const_addr_full_words to get_write/read_info and advance_write/read_pointer pairs.
2021-07-29 20:24:11 +09:00
3f49380b37
added support for dcd_edpt_xfer_fifo
2021-07-29 20:22:33 +09:00
1c2e353193
Refactor and clean up
2021-07-29 20:22:33 +09:00
15112fdbba
clean up compiler
2021-07-22 22:10:48 +07:00
8cd23489d5
update endian
2021-07-22 17:49:39 +07:00
c4da1abb1e
rename bit filed order
...
clean up packed/bit order begin end
2021-07-22 17:30:08 +07:00
4e50ceba48
rename packed begin/end
2021-07-22 17:07:39 +07:00
fa0936bf58
Merge branch 'CCRX_Port' of https://github.com/Wini-Buh/tinyusb into Wini-Buh-CCRX_Port
2021-07-22 16:48:18 +07:00
c737aa6fbb
Merge pull request #693 from HiFiPhile/dcd_same70
...
SAMx7x (E70, S70, V70, V71) DCD Support
2021-07-22 00:07:33 +07:00
8c6cd5396c
Fix non-DMA IN irq.
2021-07-21 10:50:07 +02:00
5492d9148c
Re-enable SETUP irq on EP0 stall.
2021-07-21 10:29:47 +02:00
9c26c0c01e
Remove redundant TX irq.
2021-07-21 09:42:26 +02:00
eec927ea95
Fix EP0 issue (again)
2021-07-21 00:28:51 +02:00
fa9a327a71
Workaround of EP0 issue, clean up.
2021-07-20 13:24:39 +02:00
895c913aa9
Merge branch 'dcd_same70' of https://github.com/HiFiPhile/tinyusb into dcd_same70
2021-07-19 22:04:34 +02:00
75f61328ea
Remove clock init.
2021-07-19 22:03:47 +02:00
cee980c598
Fix for dcd_synopsys driver integer overflow in HS mode (issue #968 ).
2021-07-19 17:45:12 +10:00
05f59fb8ed
clean up warning
2021-07-19 12:08:01 +07:00
8cae17bfc8
Fixing NAKed OUT xfer
2021-07-19 01:07:33 +02:00
bae0d3b7bb
Fix build error.
2021-07-17 14:42:23 +02:00
kkitayam