6fea50f735
musb work well with tm4c123
2021-11-08 16:41:29 +07:00
23e6e0ef33
merge pull request 670 for tm4c123gxl bsp
2021-11-08 16:41:29 +07:00
26461d1efe
Fix DCD_EVENT_XFER_COMPLETE was signaled, even after EP is closed
2021-11-07 18:25:11 +09:00
0b3c8c4a59
Implement dcd_edpt_xfer_fifo for dcd_musb
2021-11-06 00:06:27 +09:00
50ca0dda2c
Add dcd_musb.c
2021-11-06 00:06:26 +09:00
f183d0810b
Add files for msp432e4
2021-11-06 00:06:26 +09:00
ab760290a5
Merge pull request #1181 from liamfraser/rp2040-hcd-assert-fix
...
Fix invalid assert in RP2040 host mode when compiled in debug mode
2021-11-05 21:40:42 +07:00
d20a5b3a09
bth: Add IAD to BT descriptor
...
Bluetooth's specification defines IAD for primary controller.
While it seems that Windows and Linux can leave without this,
there is no reason TinyUSB should not provide it.
2021-11-05 13:03:31 +01:00
ec8ece2c9d
bth: Update driver to interface association changes
...
Two interfaces that are required by Bluetooth Primary Controller
do not have IAD according to Bluetooth specification.
Those two interfaces were opened separately in process_set_config().
Later interface association was inferred for BTH (along with other
drivers), since then only one call to open() is place for BTH driver
that should prepare both interfaces at once.
To make it work again btd_open() parses two interfaces at once.
2021-11-05 12:33:15 +01:00
e692fa9ae4
RP2040 HCD: Move invalid ep->active assert in hw_trans_complete. The check for ep->active should only happen if a setup packet was just sent. Otherwise the transaction is handled in hw_handle_buff_status.
2021-11-05 09:39:31 +00:00
c04006bc13
Merge pull request #1180 from hathach/add-xmc4500
...
Add xmc4500
2021-11-05 14:38:23 +07:00
d87a897a7b
xmc4500 ported, cdc msc example run fine
2021-11-05 13:13:21 +07:00
a3fc107d94
xmc4500 led blinky, button ok
2021-11-05 11:57:36 +07:00
e35bb6341c
broadcom/dcd: Fix mynewt build
...
dcd_synopsys.c included broadcom/interrupts.h before
preprocessor check whether file should be used.
Since mynewt build does not include all folders it resulted in build
error.
Now offending include is moved few lines after preprocessor check.
2021-11-04 21:46:17 +01:00
f90f5ea369
adding g4 family with g474nucleo, able to blink led and button
2021-11-04 16:16:51 +07:00
fc59515bfd
Merge pull request #1163 from hathach/generalize-synopsys-dwc2
...
Generalize synopsys dwc2
2021-11-04 13:41:25 +07:00
6cfdf697eb
add hint/question with ISB
2021-11-04 12:42:28 +07:00
b51d038b65
fix issue with bcm2711 caching issue by ading ISB() after dwc2_dcd_int_enable90
...
also add hwcfg_list for reference
2021-11-04 12:30:11 +07:00
e16506cb52
clean up
2021-11-03 12:24:10 +07:00
7e68894726
grouping stm32L4 family in bsp
2021-11-02 16:10:40 +07:00
b809429873
minor clean up
2021-11-02 14:51:15 +07:00
aa682d7301
add fix for stm32l4 (version 3.10a) which generate transfer complete when setup recieved and control out data complete
2021-11-02 13:52:30 +07:00
9245b8f89f
Merge pull request #1164 from suda-morris/refactor/update_include_header_esp32xx_dcd
...
update dcd_esp32sx with correct include list
2021-11-01 15:24:51 +07:00
215e0595ab
change F207 to use new dwc2
2021-10-31 00:09:40 +07:00
b85a6898af
remove dcd_efm32
2021-10-30 20:45:58 +07:00
9cd5a87c64
add support for EFM32GG
...
merge GG12 GG12 to simply OPT_MCU_EFM32GG
2021-10-30 20:42:55 +07:00
660e8b8c88
skip snpsid check for gd32, abstract phyfs turnaround, set max timeout calibration.
...
still has issue with gd32 with msc (does work with running with rtt as
log).
2021-10-29 16:08:19 +07:00
6c67fc4125
correctly init hs phy for bcm
2021-10-29 00:53:30 +07:00
7def380058
support bcm2711 on pi4, enhance dcd init with utmi and ulpi hs phy
2021-10-28 12:52:18 +07:00
49aa69a301
update bcm dcd
2021-10-26 23:57:48 +07:00
07829510e7
Merge branch 'tannewt-rpi' into generalize-synopsys-dwc2
2021-10-26 23:43:35 +07:00
9f1cd1a753
add synopsys id check, rename GCCFG_* to STM32_GCCFG-*
2021-10-26 23:10:26 +07:00
bb5dab5c2e
add hw config struct
2021-10-26 22:48:01 +07:00
68fa9d4064
enhance fifo read/write
2021-10-26 13:56:56 +07:00
5d05f8758f
more clean up
2021-10-26 13:36:43 +07:00
4ebfd00d67
clean up
2021-10-26 13:33:40 +07:00
de413183d4
use dwc2->epin
2021-10-26 13:07:00 +07:00
e7655a7567
update the access epout
2021-10-26 13:02:26 +07:00
34844c9061
use dwc2->fifo[]
2021-10-26 12:53:29 +07:00
5e1a031800
complete dwc2 regs struct
2021-10-26 12:22:41 +07:00
3755814f57
add epin, epout to dwc2 regs
2021-10-26 11:49:59 +07:00
8df078dc9e
more rename
2021-10-26 11:11:46 +07:00
7369d2441d
update dwc2_type
2021-10-26 00:55:24 +07:00
460052c8a0
spacing
2021-10-25 21:20:58 +07:00
7d0d6f85f2
update dcd_esp32sx with correct include list
2021-10-25 21:53:14 +08:00
dbd31895bc
change usage of TU_CHECK_MCU() to prevent macro conflict
2021-10-25 17:04:03 +07:00
85e18b9172
house keeping
2021-10-25 15:58:12 +07:00
4ccf60954d
moving esp32s2 to dwc2, abstract dwc2_set_turnaround()
2021-10-25 15:51:41 +07:00
9f014b059a
properly handle Program Change and Channel Aftertouch messages
2021-10-25 00:07:59 -07:00
a0202df920
add TU_ARGS_APPLY(), TU_CHECK_MCU() now could check list of mcus
2021-10-25 13:49:59 +07:00
hathach