2d7fbb5153
change keyboard_app.c & mouse_app.c from polling API to interrupt-based (callback isr) and using OSAL for task-base demo - fix ehci error with XFER_COMPLETE callback to usbh_isr, TD need to be freed & unlink before invoking callback - fix bug in usbh.c set device state to CONFIGURED right after SET_CONFIGURE control xfer
hathach
2013-04-10 02:34:40 +07:00
e14aa4197d
change osal_queue_send(osal_queue_handle_t const queue_hdl, uint32_t data) signature to osal_queue_send(osal_queue_handle_t const queue_hdl, const void * data) - support any size queue message (instead of fixed uint32_t)
hathach
2013-04-10 01:13:31 +07:00
e6a44b3fe9
add test & code for TUSB_EVENT_INTERFACE_OPEN for tusbh_hid_keyboard_isr tusbh_hid_mouse_isr
hathach
2013-04-09 13:28:07 +07:00
11dff6f978
add Lib_OemBaseBoard to bsp/board but current exclude from all builds (added when needed later)
hathach
2013-04-09 02:30:33 +07:00
c036efff1d
adding code to allow configure MIC2555 to pull down D+/D- (still need bit bangding I2C on PB_0 PB_1) add back port reset after get 8 bytes of device descriptor
hathach
2013-04-09 02:13:18 +07:00
b0a54cbf8f
amend last commit
hathach
2013-04-08 15:01:04 +07:00
94e25880dc
- add scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence - USB1 host run ok with NGX4330
hathach
2013-04-08 14:57:00 +07:00
ef850984da
move MCU define to tusb_option.h, fix the ATTR with USB RAM hack: add delay before the very first xfer when enumerating (finalize later after reading USB 2.0 specs)
hathach
2013-04-08 03:45:31 +07:00
10c08ab404
add test for mouse_open add hid descriptor for mouse & mouse interface to descriptor_test refractor extract function hidh_interface_status fix error with MACRO HID_REPORT_ITEM with zero data size --> redundant semicolon
hathach
2013-04-07 15:48:01 +07:00
3d8a4ef8c8
remove hcd_port_reset before set address in enumeration add test & implement tusbh_hid_mouse_is_supported
hathach
2013-04-07 14:44:53 +07:00
27f860db9f
rename hidh_keyboard_info_t to hidh_interface_info_t rename tusb_bus_event_t to tusb_event_t add test_mouse_init and more stuff for hidh mouse move delay after port reset to only for speed detection prioritize port change interrupt over xfer interrupt - in case of unplugged, current connect change & xfer error both set - xfer error only break to debugger if not because of unplugged
hathach
2013-04-07 05:09:18 +07:00
24ade0458e
fix compiling error for tests project start to add support for host hid mouse
hathach
2013-04-07 03:53:53 +07:00
1776bb53f6
add hal init for USB1 and trying to get USB1 working add hack delay 100 ms after a port reset (huge) for correct speed detection
hathach
2013-04-07 03:40:24 +07:00
d616fa6c10
continue on refratoring
hathach
2013-04-05 14:26:28 +07:00
10f5bce0df
code refractor is a everyday job
hathach
2013-04-05 14:13:03 +07:00
bc9a97a1be
refractor test
hathach
2013-04-05 14:05:05 +07:00
68dddefe7b
add control xfer for ehci controller fake: ehci_controller_control_xfer_proceed refractor test code
hathach
2013-04-05 14:00:37 +07:00
fcb8e295ec
clean up, update tests for hcd_port_reset after 8 byte descriptor & set configure before open class driver
hathach
2013-03-29 23:37:59 +07:00
e658e67ebe
fix the damn bug within 10 line of code in keyboard_app.c
hathach
2013-03-29 00:20:27 +07:00
d95c6cf2e0
quick fix for a bug in keyboard app. still have unplug/plug event after receiving report from keyboard devices
hathach
2013-03-27 15:42:45 +07:00
7b5d9edc5a
add test for pipe_interrupt_xfer implement keyboard app code - forcefully place keyboard_report in RAM section 3 change used bit in qtd from reserved in buffer[1] to alternate link add code for fake ehci controller runs on period interrupt change signature of tusbh_hid_keyboard_get_report - tusb_keyboard_report_t* to uint8_t* implement period (interrupt) complete isr processing
hathach
2013-03-27 11:51:44 +07:00
b0ff7a7e23
add code & test for hidh_isr (set status for keyboard)
hathach
2013-03-26 17:04:55 +07:00
ac905a8d09
rename pipe_status_t to tusb_interface_status_t add tusbh_hid_keyboard_status & test code
hathach
2013-03-26 16:39:25 +07:00
205a21ff04
add code for hidh close refractor the full configure descriptor parsing in enum task
hathach
2013-03-26 13:45:14 +07:00
3c767e9f44
add field to endpoint maxpacketsize (mult) refractor hidh_open_subtask & hidh_keyboard_open add ATTR_PACKED_STRUCT(x) - TODO remove ugly pre_pack & post pack
hathach
2013-03-26 13:07:42 +07:00
03d045ecde
- put ATTR_UNUSED to hardfault handler variables to discard compiler warning - change host_class_driver_t: open_subtask signature to accept tusb_descriptor_interface_t const * instead of uint8_t*
hathach
2013-03-26 12:14:04 +07:00
54acee1fc8
start merge hidh_keyboard back to hidh
hathach
2013-03-26 11:41:41 +07:00
a7e8a2ba9a
pass all the current tests
hathach
2013-03-26 02:06:30 +07:00
086a8e4a2d
add flag_supported_class to usbh_devices remove all ATTR_WEAK in init,open,isr,close driver functions of USBH-CLASS API - prefer testing
hathach
2013-03-26 02:02:54 +07:00
ff03b452d9
remove multiple instances per device for hidh keyboard (no needed) - API retain though
hathach
2013-03-25 22:06:00 +07:00
2622cc487b
add more test and complete keyboard open
hathach
2013-03-25 17:57:33 +07:00
d0a73f4b0d
add several helper function add test & code for hidh_keyboard_open_subtask - skip parsing HID descriptor for keyboard
hathach
2013-03-25 17:39:22 +07:00
c026a9f2e0
remove obsolete TUSB_CFG_HOST_HID_KEYBOARD_ENDPOINT_SIZE temporarily ignore test for hid_host.c due to ceedling linking issue with weak symbol implement hidh_open_subtask driver to subclass open rename hidh_keyboard_install to hidh_keyboard_open_subtask
hathach
2013-03-25 16:02:24 +07:00
45db7b4a53
able to build test hidh hack include in hid_host_keyboard.h
hathach
2013-03-25 13:51:44 +07:00
ddeec330fa
separate hidh_keyboard from hid_host move test hid related to its own folder
hathach
2013-03-25 13:08:40 +07:00
56cd8be75e
change website from tinyusb.net to tinyusb.org
hathach
2013-03-25 11:46:30 +07:00
20a22d956d
changing the hcd_pipe_close behavior - bulk/int/iso pipe can only be closed as part of unmount/safe remove process add test for interrupt_close
hathach
2013-03-25 10:56:51 +07:00
b15694bc5f
fix potential bug when insert new queue head to list
hathach
2013-03-24 22:24:27 +07:00
62f5ec8a0f
period_frame_list0 is not existed if period list is not required
hathach
2013-03-24 21:53:41 +07:00
a1b17be681
add class flags change keyboard_info_pool to keyboard_data
hathach
2013-03-24 17:29:07 +07:00
92c137243d
refractor - rename usbh_device_info_pool to usbh_devices - create a struct for control pipe in usbh_device_info_t
hathach
2013-03-24 16:44:59 +07:00
ea04815bbc
rename sem_hdl in usbh_device_info_t control_sem_hdl
hathach
2013-03-24 16:22:58 +07:00
55ce5cc4a2
add TUSB_DEVICE_STATE_INVALID_PARAMETER to tusb_device_state_t
hathach
2013-03-24 16:05:50 +07:00
439a3134b9
refractor - rename tusbh_device_status_get to tusbh_device_get_state - replace tusbh_device_status_t by tusb_device_state_t
hathach
2013-03-24 16:02:45 +07:00
9c5ffa9932
house keeping
hathach
2013-03-24 14:32:54 +07:00
e6630af5a4
clean up
hathach
2013-03-23 23:43:25 +07:00
0c5e0ef0f3
- add control_pipe_status for usbh_device_info_t to reflect the status transfer of control pipe - fix bug with hcd_port_reset + remove regs->portsc_bit.port_enable in the wait loop as device unplugged can cause this to always fails - correct the timeout for hcd_controll_stop/reset 16 uframes ~ 2 ms - potentially fix bugs device unplugged when new address is not assigned
hathach
2013-03-23 18:36:43 +07:00
44e09cc397
enhance some tests add test for usbh_isr error invoke fix bug if device unplugged before is set to new address - clean up & close control addr0 in usbh_device_unplugged_isr
hathach
2013-03-23 17:31:51 +07:00
4adfc6a6d8
change signature usbh_isr to add tusb_bus_event_t parameter change singature of call_isr as well
hathach
2013-03-23 15:00:56 +07:00
e6b8166a58
house keeping
hathach
2013-03-23 14:18:17 +07:00
e14864759d
refractor - rename TUSB_DEVICE_STATE_READY to TUSB_DEVICE_STATE_CONFIGURED - move device_state to core/tusb_types.h - remove usbh_device_hcd_data_cleaned_up_cb, hcd now set the state directly
hathach
2013-03-23 12:13:02 +07:00
d7ba86c85e
refractor - rename usbh_device_info_t.status to state - rename enum TUSB_DEVICE_STATUS_* to TUSB_DEVICE_STATE_*
hathach
2013-03-23 11:34:51 +07:00
0c6d406ddf
- house keeping - add controller id for hal_interrupt_enable/disable
hathach
2013-03-23 10:56:41 +07:00
ae9b9ead7a
continue clean up ehci
hathach
2013-03-23 10:23:37 +07:00
58b252b3f1
clean up ehci
hathach
2013-03-23 10:14:47 +07:00
8beb749761
clean up
hathach
2013-03-23 09:57:08 +07:00
660440d69c
refractor extract to function qtd_remove_1st_from_qhd
hathach
2013-03-23 02:56:17 +07:00
eddaa8394b
fix issue with Interrupt Async Advance - only acknowledge interrupt that we check
hathach
2013-03-23 02:51:41 +07:00
53a4164b39
use DO PING for highspeed out bulk
hathach
2013-03-22 21:50:07 +07:00
397d62db10
fix bug: adjust all bulk queue head from ehci_data.device
hathach
2013-03-22 21:21:00 +07:00
f6acca6664
add callback for hcd when it cleaned up all cache data for a device (previously mark as removing).
hathach
2013-03-22 18:55:45 +07:00
6b276d09bf
house keeping for pipe API test code
hathach
2013-03-22 17:45:03 +07:00
45c94c2aa9
test code clean up
hathach
2013-03-22 17:36:59 +07:00
cf98cdeaa2
refractoring test code
hathach
2013-03-22 17:34:59 +07:00
9d4327f5bd
start to clean up test code
hathach
2013-03-22 17:10:38 +07:00
dbaf6c0d30
- fix bug when unplugged unmounted-already device (mostly plugged when power on) - add hal_debugger_is_attached & hal_debugger_breakpoint - assert will suspend (place breakpoint) if the condition is failed and debugger is attached. Otherwise, a message to uart is printed - fix get control qhd function when dev_addr is not zero (shifted 1) - fix wrong logic for unsupported class
hathach
2013-03-22 17:08:51 +07:00
cd2915e78c
house keeping
hathach
2013-03-13 21:45:06 +07:00
9bc30f7694
add some test for usbh_hcd integration - add tests for pipe_close (while TDs are active) - add tests for device unplugged add tesst & implement the async_advance_isr to clean up "REMOVING" queue head - add helper find previous qhd - add remove qhd from async list - add is_removing field for async advance isr to clean up add pipe close for control pipe & bulk pipe (with tests) add helper get qhd from pipe_handle
hathach
2013-03-13 21:42:19 +07:00
dbd3d9618d
refractor rename field inactive_next_xact of ehci_qhd_t
hathach
2013-03-13 12:29:44 +07:00
1a932e7437
refractor ehci test files adding some code for async_advance_isr add test for async_advance_isr
hathach
2013-03-13 12:25:27 +07:00
97c436a16e
add usbh_pipe_control_close (in conjunction with usbh pipe control open) close control pipe when unplugged
hathach
2013-03-13 11:20:02 +07:00
97c9001d40
add hard fault handler to bsp.c rename class_install_subtask to class_open_subtask add class_close for unmount adding code for usbh_device_unplugged_isr & invoke it in hcd_isr
hathach
2013-03-13 10:57:30 +07:00
63765b37c7
forget to add test file for ehci isr
hathach
2013-03-13 00:17:02 +07:00
79e277d323
go through all the enumeration (up to get full configuration) - fix init_qhd for address 0 (clear queue head --> ehci controller halted) - fix bug in usbh_init missing address0 for semaphore create
hathach
2013-03-13 00:02:45 +07:00
d2bd80109e
add semaphore post in usbh_isr for control pipe add osal_queue_send in usbh_device_plugged add macro for placing breakpoint macros fix ehci init: - regs->cmd or (add run_stop) - enable port power in portsc add tusb_task_runner in main loop
hathach
2013-03-12 20:04:29 +07:00
60c2caf84a
implement port hcd_port_connect_status clean up
hathach
2013-03-12 16:46:47 +07:00
80facf6f2e
add isr api for usbh_hcd - void usbh_device_plugged_isr(uint8_t hostid, tusb_speed_t speed); - void usbh_device_unplugged_isr(uint8_t hostid);
hathach
2013-03-12 16:42:19 +07:00
453ea39865
add project file for keil fix binary.h compiler specific add hal_init code to reset & set usbmode --> able to get USB ISR remove const qualifier from return function of - get_operational_register - get_period_frame_list - get_async_head - get_period_head - get_control_qhd add stub for - hcd_port_connect_status - hcd_port_speed
hathach
2013-03-12 12:06:40 +07:00
38ff7123b4
add semaphore reset & queue flush API for osal add semaphore reset when opening control pipe
hathach
2013-03-12 00:10:52 +07:00
8eaad2326b
add semphore reset & queue flush API modify test to check control pipe semaphore created with usbh_init
hathach
2013-03-11 12:00:25 +07:00
c1ceec067f
add isr empty function for hidh and msch and usbh
hathach
2013-03-10 19:42:50 +07:00
3b0b48e01a
- add test code for bulk xfer isr - fix mismatch type func return
hathach
2013-03-10 19:28:38 +07:00
c1848b8114
add code for ehci interrupt handler - interrupt source identifying - for async list process refractor control_xfer to use insert_qtd_to_qhd - add test for control xfer interrupt processing - add code for faking ehci controller async list scheduling & processing - add prototype for void usbh_isr(pipe_handle_t pipe_hdl, uint8_t class_code);
hathach
2013-03-10 17:51:53 +07:00
hathach